MacBook Pro :: IDVD Wont Burn Dvd?

May 21, 2010

I have a huge problem creating a DVD.

I start the burning and IDVD starts rendering and stuff BUT when its just about done it shots out the dvd and theres is NO message at all about whats wrong...

And he mac just continues the burning section with the dvd hangin out untill I stop it?

What the hell is wrong?

View 1 Replies


ADVERTISEMENT

MacBook Pro :: Cannot Burn Discs In IDVD

Feb 1, 2012

My Macbook pro can't burn dvds in idvd but it works fine on external burner?

Info:
MacBook Pro, Mac OS X (10.7.2)

View 4 Replies View Related

MacBook Pro :: Can't Burn IDVD To Disc

May 29, 2012

Created iDVD with slideshow and music on my 5 yr old MBP.Tried to burn it to a Staples -R DVD disc.It appears to be burning for about 35 minutes, then with one minute left, it stops and ejects the disc.No error message. I saved the file as a Disc Image and was able to view it with the DVD player on my MBP.However, when I went to burn it to the disc, I got this message:"The disc can't be burned, because the device failed to calibrate the laser power level for this media."

View 4 Replies View Related

MacBook Pro :: Idvd Won't Burn Dual Layer Movies

Mar 28, 2012

how to make my idvd burn dual layerd movies? I've done everything the same as I always have and it still won't do it. Do I need to buy something other than Sony discs? I'm at my whits end.

Info:
MacBook Pro, Mac OS X (10.6.8)

View 14 Replies View Related

MacBook :: Will It Harm To Burn 75 Copies Of An IDVD Project

Apr 9, 2012

I need alot of copies of a project I made on idvd for a church fundraiser how many can I burn safelywithout harming my computer

Info:
MacBook, Mac OS X (10.7.3)

View 4 Replies View Related

MacBook Pro :: Burn A Movie .mp4 Straight To A Dvd Without All The Idvd Menus?

Jun 28, 2012

ow do i burn a movie .mp4 straight to a dvd without all the idvd menus. having a lot of problems burning it through idvd.

View 2 Replies View Related

PowerPC :: Use Emac To Burn IDVD Projects Created On MacBook?

Feb 27, 2007

I'm creating a slideshow DVD on a new MacBook. I want to burn it to a DVD, but my MacBook doesn't burn DVDs. I have an Emac (10.2.8) that can burn DVDs. Is there a way I can hook up the MacBook and eMac to burn an IDVD project created on a MacBook. I can't just do the project on iDVD on my emac as it's an old version of IDVD that doesn't support the transitions I'm using.

View 1 Replies View Related

MacBook :: Use Super Drive From Other Computer To Burn IDVD Project?

Jun 19, 2014

I have an iDVD project on an older macbook without a superdrive. The iDVD project is complete, but I can't burn the dvd. I also have a newer macbook with a superdrive. Is there a way to connect the 2 computers together so that I can use the super drive from the other computer to burn the iDVD project?

View 3 Replies View Related

Applications :: Burn DVD's From IMovie Without IDVD?

Jun 21, 2005

I have iMovie 2.1.2 on a Mac G4 with a superdrive burner. I've captured video from my mini-dv camcorder and now I want to put it on DVD to be played on any DVD player.

I've tried a few of the "expert" settings to export it, but none do the trick as far as producing playable DVD's. I have toast titanium 5 and I don't have Quicktime Pro. I also do not have iDVD.

I have Final Cut Pro on this computer, but have no idea how to use it.

Is there a simple way to to export directly from iMovie onto a playable DVD, or do I need something else?

View 3 Replies View Related

OS X :: Moving IDVD Media - Cannot Burn DVD?

Aug 12, 2009

I've just started mucking about with idvd and it looks good but unfortunately my mac cannot burn dvds, so I was wondering if any body new a way I could put the file on a standard disk or flash drive and transfer it to a computer that can burn the dvd using the file?

View 1 Replies View Related

Applications :: Burn DVD But Already Put IDVD As Default?

Jan 1, 2010

I have several seasons of a TV show downloaded to my MacBook Pro and I'd like to burn the content onto a blank DVD. I'm still new to Mac so I didn't know what applications could be used to do this. I thought iDVD could do it, so I when I inserted the blank DVD, I (stupidly) made it my default to have iDVD open when I put a blank DVD in. I found that it didn't work in iDVD so I'd like to just do it with Finder... How do I change my default setting so I can do it with Finder instead?

View 3 Replies View Related

Software :: Idvd 5 Won't Burn Disc?

Aug 2, 2005

I set up iDVD to burn a disc of my movie; it did so just fine. I saved the set up, then tried to reburn additional DVDs. It opened ok, but refused to burn anything-when it got to the "Burn" stage, it would display "recording finished" then lock up.

Are there some preferences I can trash on this, or what?

View 3 Replies View Related

Software :: IDVD Not Opening At All - How To Burn Dvd

Jul 7, 2008

Well, I've shot myself in the foot again. I wanted to make a demo video (see youtube, drumagination, new drum pedal) and I wanted to use iMovie '06 on my brand new iMac (running OSX 10.5.4). I deleted iDVD '08 and brought in just iMovie '06 and iDVD '06 from an iLife '06 disk. iMovie works fine, but iDVD '06 will not open.

To make matters worse, I've lost the disks that came with the machine.

Any ideas as to how to burn a DVD from here?

View 1 Replies View Related

Software :: What's The Best File To Burn On IDVD

Mar 12, 2009

I want to ask what is the best (biggest file) supported by iDVD? Such as Quick Time Movie, or mpeg2 or mpeg4 or avi?

View 2 Replies View Related

OS X V10.7 Lion :: Copy/burn To DVD In 10.7.2 Without Idvd?

Mar 11, 2012

Has anyone else bought a PC that cannot burn imovie project to DVD?My circle needs disc sharing. Please advise how to complete/ finish imovie to burn a dvd.

Info:
iMac

View 1 Replies View Related

App Store :: Burn Dvd From IMovie Without Idvd?

Apr 27, 2012

How do I burn a movie project to a DVD from i Movie if i DVD was not installed on my Mac?

View 2 Replies View Related

Power Mac G5 :: Changed Superdrive - Can't Burn From Idvd

Dec 3, 2007

The guys at work convinced me that I could change out my own internal superdrive and I did. Now it will read disks but it won't burn from idvd or itunes. I get the message "burning preparation error: Not enough space for encoding the remaining assets. The weird thing is since I changed out my internal superdrive my external la cie DVD burner gives me the same message when I try to burn to it.

Information:
G5 (new) Pioneer DVD -RW DVR-112D
Mac OS X (10.4.10)

View 1 Replies View Related

Applications :: Can Speed Up Idvd Burn Time

Nov 30, 2008

I'm an oldie so not very computer savvy, and a newbie here, so forgive me if this is the wrong place to post, or the topic has been dealt with before......

I have a macbook with 2.4ghz intel duo processor, 2 gigs of ram and a 150gig hard drive ( 50 gigs free ).

I've been downloading some free movies for the kids and burning copies with idvd. Trouble is it take 3-4 hours to burn each disk. The original files are .avi and range around 700mb.

I use the magicidvd option in idvd, as it seems the most straight forward. I drag and drop the avi into the movie box, but usually get a message saying the project is too big and I have to change settings in project info. Not fully sure why this is but I find setting the quality to 'professional' ( I think.....disc burning at present so can't open the menu, ) allows me to continue.

My questions are - Am I causing idvd to take longer by the method I've outlined above?

Is there a way to speed up the burn time? I would prefer not to have to buy some other software but am open to suggestions. If I could reduce the burn time with idvd to a couple of hours that would be fine.

View 4 Replies View Related

Applications :: IDVD Audio Loss On DVD Burn

Dec 4, 2008

I edited a video in FCP and exported it as a quicktime. The resulting file is a little over an hour, about 13gb in size, and has 14 chapters. The quicktime movie plays perfectly. When I build the DVD in iDVD it works perfectly. However, once it's burned I lose the audio in the middle of the 13th chapter until the end. I've deleted preferences, re-exported the quicktime, created new DVD projects, used an older template (I'm now using a version 7 template).... I'm not sure what's going on!

View 2 Replies View Related

Applications :: IDVD Does Not Burn - Freezing And Ejecting

May 19, 2009

I recently went all out for this girl and ended up having to make a Dual Layer dvd. After it went through all the stages of burning up to mixing I was met with this prompt and the dvd ejected. I slid the dvd back in and it stopped making noises after a few seconds. I wait until the time ran down to "about one minute" and then it froze for about three minutes until I got fed up and hit cancel. I can't figure out why this isn't working but I am pretty certain the DVD's are now unusable. The movie is just under the size for a DLDVD (7.21) but yeah.

I had a similar issue with itunes when burning CDs only when I reinserted the CD I successfully burned the music. If the trick is a full reinstall then please advise on how to not loose any data (I use time machine). Well I gave it another Go with a different movie that had just 1 menu with a filled drop zone and custom music and got this error (below). So I am going to copy my pref files and then delete the originals to see if that turns out.

View 10 Replies View Related

Intel Mac :: Cannot Burn DVDs In Either IDVD Or IMovie

Feb 24, 2012

The DVD ejects before the process ends, and is blank. I have an iMac running Lion. Significantly, nothing at akll comes up about disc burning in the 'About My Mac' utility.

Info:
iMac, Mac OS X (10.7.3), Garageband

View 13 Replies View Related

OS X :: How To Burn Movies Bought On Itunes/appletv To IDVD

Jul 1, 2009

I bought a movie Bolt, for my son on itunes. I am trying to write this movie to a DVD as we are going on holiday and I want to take it with me. When I go to uDVD it tells met to first go to iMovie, share, media browser. However, when I do that, the options media browser is not available to choose. Last night I was able to write the movie to the DVD by opening iDVD, choosing file, burn to DVD from movie. However, it burned the DVD with sound but no picture. Obvsiouly it is encoded or something but I cannot figure out how to get this right!

We are gonig tomorrow and I need to do this tonight! I am not very computer literate!

View 2 Replies View Related

Applications :: Alternative To IDVD To Burn 3 Hours Movie?

Jan 31, 2010

I've searched and I still cannot find a free program that will let me burn a movie to a DVD. I used handbrake to bring the video file down to 4.5 GB. I'm trying to put it on a 4.7 GB disc and iDVD still won't let me because it says it is too big! I've been tinkering with iDVD and it's making me crazy. There must be a way to just burn it. I don't need a menu. Keep in mind that I want to be able to watch it on a dvd player (as opposed to just transferring the file). Just an FYI, the video file is 3 hours and 28 mins. It can be .mkv or .mp4 (through handbrake).

View 3 Replies View Related

Applications :: Using Mov Files In IDVD, No Sound And No Video Play After Burn?

Apr 1, 2009

I have 12 Videos in .mov format that I saved from .wmv format using quicktime and flip4mac. I have also tried saving them as AVI and same result.

Here's the problem, when I put them into iDVD and save as disk image to check, the videos are there, but no sound. I tried also burning them to DVD, using a maxell DVD-R 16x, and all the will come up on the dvd is the title menu. Movies will not play on my macbook or in the dvd player on TV. I tried using the .avi format but there still was no sound, and the movies were really choppy.

if i try to use iMovie, it will not even import these .mov files (doesn't let me click on them to import)

is there another format i need to export to, or change some setting to get the sound in my project, and get the movies to play have i burn them?

All the movies are approx 1hr long except one, and I was using the best performance setting putting 2 movies per dvd.

View 7 Replies View Related

OS X :: Using IDVD To Burn Movies - Your Project Exceeds The Maximum Content Duration

Nov 25, 2009

i am trying to burn a move in avi format to put on a dvd using iDVD but this it what it says "Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window".

View 3 Replies View Related

Software :: Idvd Slideshow Short Audio Dropout At Each Transition After Burn Out?

Aug 2, 2005

When I make a slideshow with music in iDVD, it plays fine on my Mac, but after burning the DVD, there is a short audio dropout at each transition between photos when I play the DVD on my home DVD player. Am not sure if this is a player problem, or what I can do to get around it.Your answer can be technical.

View 1 Replies View Related

MacBook Pro :: Disk FULL Error When Export Movie In IMovie Or Burn Disk In IDVD

Nov 25, 2010

Every time I try to export a movie in iMovie or burn a disk in iDVD an error message pops up and says that my startup disk is full. So I bought an external hard drive and backed up my mac using Time Machine. Now I want to delete everything off my mac's internal Hard Drive and use my external hard drive so I can empty my disk. Does this make sense? If so will you please tell me how to do so.

View 6 Replies View Related

Software :: IDVD Not Opening - After Installing The Latest Update For IDVD

Jul 3, 2008

After installing the latest update for iDVD- I can't open the program! I tried the "fix" posted on the Apple site- no luck. It worked fine before the latest update.

View 3 Replies View Related

Applications :: Alternative To IDVD Or Different IDVD Themes?

Dec 26, 2010

I couldn't find what I was looking for in MRoogle.

The thing I hate about iDVD (besides it taking so long to burn video DVDs on Mac) is that the themes are more than I need and take up valuable disc space.

1. Are there any iDVD themes that are simply a menu...no music, no video clip previews, no sappy backgrounds, etc?

2. Is there a free (or cheap) alternative to iDVD excluding Toast?

3. I'd be using .mov or .mp4 as my source video.

4. I have iDVD 7.0.4 and am using Snow Leopard. I really don't want to pay for iLife 11 as I never use Garage Band or iPhoto. iMovie kinda sucks too.

View 5 Replies View Related

Applications :: Unable To Burn Videos Via Toast / Burn Files From A Network?

Sep 17, 2010

It is supposed to be the best burning package on mac. But I doubt it. I convert videos to dvd-video format using the absolutely brilliant windows7 application convertxtodvd. Please dont tell me to use a mac application instead of it. I tried it many times, there were always several problems(slow speed, subs etc). This is not the case here.

So, I want these dvd-videos in Video_ts format, to be burned in dvd disks using toast. It is supposed that video_ts folder are a standard folder, no matter the system you use. But toast has a different opinion. When I drag the folder in the dvd-video window, it asks to re-encode the video!!!If I try to burn this video_ts folder in windows machine using 'nero', no problem at all, straight burning! I really cannot understand why this happens.

Another problem I have is that the files I want toast to burn, usually reside to network computer. Is there any way to burn files from a network computer(win) using toast? Can toast access network or not? If not, I have to manually copy files to local disk, several minutes spent for copying gigabytes just to be able to burn them.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved