I'm new to the forum and just have a quick question re using an external monitor with my Macbook Pro. I have a 17" Macbook Pro 5,3 (purchased new Aug 2009) and want to connect an NEC PA241W external monitor to it. Does anyone know what the best way is to do this?
View 2 Replies
I just got a Samsung 2333sw monitor. When I plug into my 128GB SSD Rev B, it automatically uses the samsung as 2nd monitor. The screen is fully covered.
But when I select mirror (using the samsung as primary screen and turned the brightness of my MBA to the lowest), the samsung LCD picture is not clear and the screen is like 4:3.
Does this means that MBA can't support ext LCD as primary screen at 1080 resolution?
How about for those who has the new Apple 24" Cinema display? Can you use that as primary screen?
I've had my Macbook for about 3 years and have always been able to connect it up to my external monitor using a mini dvi cable.
A couple of weeks ago my hard drive died and since using the new one I cannot connect.
The external monitor shows my wallpaper but nothing else, no desktop, no dock etc...
Just bought a mini dvi to vga cable and now im trying to connect my unibody 2,4 with a samsung display but my macbook won't find the display.
When i press search for displays my screen goes blue and then returns to the normal desktop and the external screen keeps saying check signal cable.
Already checked the cables there al in properly....
Could you please check if I have all the cables necessary to hook up my Macbook Pro 17" to this Vizio monitor? I got the mini display port to HDMI converter, and an HDMI cable. Is there anything else I need or do you have recommendations for a different brand? I am buying a Vizio 25.5" monitor: [URL]. Mini DisplayPort to HDMI Adapter: [URL]. High Speed HDMI 1.3a Category 2 Certified CL2 Rated (In-Wall Installation) Cable (24AWG) w/ Net Jacket - 8ft (Gold Plated Connectors): [URL]
View 3 Replies View RelatedI have been using my MBP (2010, i7 17" model) with a 24" HP external HDMI LCD monitor. The connection is via the Apple's Mini DisplayPort to VGA Adapter. It was working perfectly the first day I tried. However, when I connected the external monitor to the MBP yesterday, I found that the LCD screen of the external monitor was blinking. It lasted for about 5 minutes and then the problem was gone by itself. I have just reconnected my MBP to the monitor again. The problem reappears. Anybody knows what is going on and how to fix it?
View 4 Replies View RelatedI have used my ultimate 11" on usual mirrored display on battery power and in clamshell mode.
A few hours ago, I was running many apps in mirrored mood and my air just began to lag so badly after an hour. Expose is slow as well as surfing and clicking. I wondered what happened. Then I plug back power supply and close the lid of Air, hence running in clamshell mode. It then returned to full speed.
Please help explain to me if title is true. It is disturbing to learn that plugging into to ext monitor could lag.
I have an 15" Macbook Pro (Lion) with external HP monitor, which has been working fine. It is connected to Thunderbolt port via DVI.Today I connected the MBP to a Sony TV using Thunderbolt port via HDMI, which worked. When I switched back to the external HP monitor, colors were reversed on the HP monitor (you can read the contents but the colors are mostly green and pink). The MBP internal monitor displays correctly. I've tried rebooting the computer, resetting the HP monitor to factory settings, and deleting the HP monitor profile. No change.
View 5 Replies View RelatedRecently I connected my macbook air (bought it in 2011, now on Version 10.9.3) with a Panasonic TV (TX-32LM70F) via Thunderbolt to HDMI adapter. After I disconnected the external device, the macbook air's screen still worked normal, but when i restarted it, it was only flickering grey.
I found out that it actually boots normally and i can use it with an external monitor (in fact I am using it right now), but that the built-in macbook screen simply doesn't work anymore.
I tried to restart while connected and while disconnected to an external screen, I have reset the SMC Controller, I have reset the PRAM Controller, but it hasn't changed.
This is actually the second time something like this happenend (it was another external device i connected it to), and last time, about a few weeks ago, it just worked again after a few days for no reason, all i did was wait until all energy was gone from the battery and the reload it. So might it be a battery problem? Or is it some controller i don't know? It was the same phenomenon two times: connect to external monitor - disconnect - built-in screen still works - restart - built in screen only flickers grey - macbook still boots and works fine with the very external monitor that might have caused the problem.
Info:
MacBook Air, OS X Mavericks (10.9.3)
I have a new MacBook that I was thinking of connecting up to an external monitor 20� or bigger, what is the maximum resolution my MacBook would output. Would I be better using VGA or HDMI? I want it to fill the screen perfectly and look stunning!
View 3 Replies View RelatedI am looking to connect my macbook pro to an Acer G24 monitor, but am not sure what best way to do it.The resolution of the monitor is 1920x1200, and it is a 24" screen, with VGA, DVI, and HDMI ports.My macbook pro is the late 2011 entry model.
Will there be a difference in the quality of the picture on my external monitor, depending on whether I connect using a HDMI cable or a DVI cable? I will have to buy an adapter for each of these, to plug into the mini DVI port on my mac, will this alter the quality of the picture at all? If I were to buy an Apple Tv, would I be able to plug it straight into my monitor using a HDMI cable? If so, how would I manage the audio, as my monitor does not have speakers. Would using a thunderbolt cable (with HDMI adaptor) increase the quality of the picture of my monitor?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4), Apple TV, Thunderbolt, Monitor
I've recently bought my first MBP and since I also have a Dell 27' monitor, I'd like to hook the MBP up to the big screen for movies and photo processings.
So given that mini displayport is the only video-out option on MBP and my Dell monitor only has a soundbar speaker (powered by the monitor but not built in), even if I got a mini displayport to HDMI cable (with audio capability) I would still need to connect that soundbar speaker to my MBP via the audio cable to get the sound right?
I bought a MBP and now want to create a office setup where I could use larger monitor, an external keyboard, and mouse for using the same MBP.
1. How to do this setup ? Is hooking an external monitor to DVI port to MBP good enough ? Can I use usb keyboard and mouse to connect to MBP ? Anything else ?
Can you please share your setup and anything that I should take care of.
What's a good place to buy these accessories ?
I want to hook up my new monitor with my 21" Imac. I have bought this mini displayport to dvi adapter. [URL]. What dvi cable should I buy? The adapter is dvid single link, but according to wikipedia the conector is dual link?
View 2 Replies View RelatedHi- I have an ibook G4 (mid 2005). I'd like to be able to connect it to my new 22" external display so that I can have dual monitors. However, the external display plug obviously does not fit into the slot in the ibook.
Does anybody know the name of the converter cable I would need to buy in order to connect the external display to my ibook? And roughly how much these cost?
I have just acquired a Dell 22' Monitor. I want to hook iy up to my MacBook Pro 15". I know I need a DisplayPort to DVI adapter But what kind of cable to I need? DVI-D Single? DVI-D Dual?
Since I am going to run an external monitor is there a way to make this work with the lid of the MacBook Pro closed?
What cables do I need to hook my early 08 MacBook Pro up to my TV and External LCD Monitor? Here's a quick rundown of what I want hooked up. TV, MacBook Pro, and LCD Monitor.MacBook Pro - has a DVI port.TV - has a DVI port and a couple HDMI ports.LCD monitor - is VGA (currently using a VGA to DVI converter to hook up to my Mac).
From my understanding, I will need a DVI extension and a DVI Y splitter either DVI/VGA or DVI/DVI.
Does this seem right? Is their a better way to do this?
I have a new white Macbook (which is nice to use) and have tried connecting it to a VGA monitor (Iiyama Pro 1900) or my TV (Sony Bravia LCD 40")using the mini-display port adaptor
I get a connection but there is no dock seen on both screens just the desktop picture), when I try opening a program such as Photoshop CS4, it will not display on the external screen.
i need to find out how to get my hands on the correct adapter to connect my macbook pro to my old G4 20 inch cinema display. i know there is an expensive powered unit, that is an adc to dvi adapter, but there is also just a regular dvi to adc adapter, and im not sure which one i need? or how to get my hands on one that doesnt cost over $200 (the powered one, if thats what i need)
View 2 Replies View RelatedI have a 13inch MBP 2.4 GHz and I just recently bought a Asus ML228 22 inch monitor. It is full HD supporting up to 1080p. I have a mini dvi to hdmi connector so I can use hdmi to connect my MBP to the monitor. But every time I do the resolution is way off. I can not use the 1080p setting because the monitor says it is out of range so I can only use the 720p and that makes it look like crap and the 1080i and that looks good but the screen flickers. I have tried putting the macbook to sleep then closing the lid and waking it back up but sometimes it just flashes and says out of range and other times it goes back to 1080i with the flickering.
View 2 Replies View RelatedI have a 2.4 GHz Aluminum MacBook which I'm trying to connect to a Samsung T220HD LCD monitor/TV.
I'm using the Mini Display to VGA adaptor.
I know the adaptor works b/c I can connect it to another external monitor at my work.
When I connect the MB to the monitor, the MB sees it b/c "Syncmaster" shows up after I detect displays. However, nothing shows on the T220HD screen. Sometimes, the LCD simply says, "There is no device connected."
I am still waiting on delivery of my 13'' MBP, comming from China , and I am thinking about secondary monitors and I do have a 17'' LCD monitor that I could use but i also have a 42'' Plasma TV that would be awsome, I think. Has/does anyone use there HDTV's as their secondary monitor?
View 7 Replies View RelatedI picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies View RelatedAs said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
I have a 27" Imac and want to use an old 19" monitor as an external unit. I have it hooked up and turned on. Just the old wallpaper shows on it. There isn't an icon or anything diff on my iMac screen for it. How do I use the external? I realize this is pretty dumb, but I'm a newbie here and my Mac expert son is in NC....
View 9 Replies View RelatedI have a new 2010 MBP and I'd like to hook up two external monitors to it, more specifically, two ASUS VW246H 24-Inch Widescreen LCD Monitors. Either via HDMI or DVI connections. I've found various usb monitor adapters, but i've read that many can't quite 'keep up' and I really can't seem to find a solid solution out there.
So does anyone have a dual monitor setup they currently use, if so, what are you using to connect the mini display port to both external monitors.
I recently bought a couple-year-old Dell 22 inch monitor (model SP2208WFP) and I'm having trouble figuring out the best connection to use. I have a early/mid 2010 MacBook Pro and the monitor can connect via VGA, DVI, or HDMI. Connecting via VGA is terrible - text is incredibly unclear and hard to read on the external monitor. Connecting via HDMI is much better in text clarity, but the colors are weird such that I can't see most pictures because they're too dark. Connecting via DVI seems to be the best option - colors are the correct color and the text clarity is fine, but still a little jagged with smaller text. I've tried using the calibrationg assistant in System Preferences on my Mac, but that seems to make things worse.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
I have a MacBook Pro 2012 (Lion) and am connecting to my monitor via the mini displayport and a VGA adapter. This worked fine for a while, but now is intermittent. It's not the cable or the monitor as I have tried with several and get same results. The port works fine with an Apple monitor and no adapter. I've seen several threads on this, but no solutions other than starting up with monitor plugged in which I've done.I updated the OS and it worked fine yesterday, but today not working again.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a newer iMac 24" bought in 11/2007. I have the mini-dvi to vga converter and when I connect it to a external tv capable of 1024x768, the iMac freezes and does nothing. I disconnect and the screen turns blue and the flickers back on and everything works. I have made the connection then booted up, and I have tried every resolution all the way down to 640x480, same thing it just locks up the screen, but again as soon as I unplug the mini-dvi to vga cable from the iMac it flicks to a blue screen and everything comes back. I have reviewed dmesg nothing, and revieiw /var/log/messages. Is there any troubleshooting I can do. I am old school unix/linux guy just converted my family to Apple and would like to use the display on my tv to watch my iTunes movies.
View 3 Replies View Related
