I am running a 2 GHz core 2 duo with the GMA 950 integrated graphics and am looking at getting a screen with a max res of 1920 x 1200. I mostly run in closed clamshell mode so it would only be driving one display. Can I do this?
View 5 RepliesI bought my Macbook Pro in February or March of 2006 and it's still running strong. The hard drive, however, is full and I'd like to get a new, larger, faster one. I'm aware that I need a SATA drive and that it's form factor should be 2.5". I'm also aware that the max transfer rate for my drive is 1.5 Gb/s, can I use one that is 3.0 Gb/s? I think the current drive is 4200 or 5400 RPM, can I use one that is 7200RPM (this computer is mostly used while on AC power)? What about maximum capacity? Are there any limitations due to BIOS or the motherboard? Here is the drive I'm looking at, please let me know if this will work or if you have a similar, better solution.
Here are some of the specs from my MBP:
Model Name: MacBook Pro
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version (system): 1.2f10
TOSHIBA MK1032GSX:
Capacity: 100.03 GB (100,030,242,816 bytes)
Model: TOSHIBA MK1032GSX
Revision: AS024B
Native Command Queuing: Yes
Queue Depth: 32
I'm looking for at least a couple of different peoples' opinions, or if you have a link that points to replacement HD requirements that would also be very helpful.
I just got a new AOC i2353 monitor hoping to pair it with my 13' macbook pro(2010 model) via display port to HDMI adapter and HDMI cable directly to the monitor. Howerver, i can't get it to display at maximum resolution it offer(max is 1080i).I can't run any of the drivers and installation softwares came with the it and my macbook pro won't detect the monitor. When i set it to 1080i mode, I see horizontal and vertical disturbances or waving. Also, picture become blurred. However, if i switch it to 1080p, picture become much shaper and no waving. Is there anyway to hard set the native resolution of the display since my macbook pro( Max OS x 10.6.8, 2.4 GHZ core 2 duo and Nvidia GeForce 320M) won't auto dectect my new montior.
Info:
MacBookPro, Mac OS X (10.6.8)
I'm in the market for a new external display. I believe I have 3 options with the Thunderbolt(not mini-display)port on my Mac.Using my mini-displayport to VGA adapterUsing my mini-displayport to HDMI adapterUsing just a thunderbolt cable.I believe that there are Thunderbolt displays on the market (AOC has a 21:9 one I believe).
What is the maximum resolution for an external display for my MacBook Pro? Does my mac support 4K? Does it support 21:9? Specifications of my MacBook:
-MacBookPro9,2
-OSX 10.9 Yosemite
-13" mid 2012 not retina
-250GB SSD
-16GB RAM
-Intel HD Graphics 4000 1024 MB
Info:
MacBook Pro, OS X Mavericks (10.9)
I need to know the maximum amount of RAM that can be supported by Mac OS X Lion Server. I know that the amount of RAM that can be installed also depends on the number of RAM slots found on the motherboard but I need to know the actual limits of the OS.
Info:
Mac OS X (10.7.3), Mac OS X Lion Server
I just got a Tangerine Clamshell that looks great w/ all original packaging. I was wanting to upgrade the 6GB hard drive with a 250GB, will the Clamshells take a hard drive this big? I know the iMac G3s can't take more than 127gb.
View 5 Replies View RelatedI have a 15 inch macbook pro mid 2010, Processor 2.66 GHz Intel Core i7.
I want to buy an external monitor to connect and work with. My question is: whats the highest resolution it will support for an external monitor.
Will it support a 2560x1440 monitor?
Info:
MacBook Pro, iOS 8.1.2
Alright I have a current rev Mini 1.83ghz, and want to upgrade the stock 80gb HD, wondering if this drive will work. [URL]. I want the 7200RPM, but wasn't sure 3.0GB would work on the intel controller, thinking it may only support 1.5GB. Also, when I reinstall leopard, does it allow me to format the drive to HFS+ or how would I do this?
View 4 Replies View RelatedI read a few posts that seem to indicate that non-mac monitor cannot display higher them 1680x1200 when connected to a Mac computer. A friend of mine is planing on getting a new Mac pro with a 30" Samsung monitor (2560 x 1600). Will he be able to run the monitor a max resolution?
View 7 Replies View RelatedJust bought a new MacBook (OSX 10.6.1 w/4GB RAM) and ViewSonic 22" monitor. When I hooked it up (via DVI) and loaded the VewSonic drivers, I got the max resolution of 1920 x 1080. Earlier today, I came back and woke up my MacBook - and got only a snowy screen on the monitor and couldn't get anything on the laptop. Restarted and now, even though the display shows 1920 x 1080, it is not providing that resolution. The max for the laptop shows 1280 x 800 and that is about what is showing on the monitor as well. I keep resetting the resolution on the monitor at 1920 x 1080 - but the screen size doesn't change.
View 5 Replies View RelatedIt's a Dell 29" monitor (I don't have the product name). I connected the two monitors using a mini-displayport-to-DVI connector. I would have chosen for HDMI, but the Dell monitor lacked that unfortunately. I've installed Windows 7 on a BootCamp partition, and I happened to be in Windows when I did this. When I turned it on, it was a duplicate display of my iMac screen. Same resolution. I went to control panel and screen resolution, and chose for 'extend these displays', but suddenly the resolution on the Dell went from 2560 x 1440 (like the iMac) to a max of 1280 x 800
View 14 Replies View RelatedI just got my MaBook Pro (2.2 GHz and nVidia graphic card). I installed Boot Camp 1.3 and Vista. I have a Benq Monitor 24" with the native resolution of 1920x1080. The MBP is attached to the monitor via DVI.
The problem is that the max resolution Vista allows me to set up for the external monitor is: 1024 X 768. I have tried the original Vista driver from nVidia, but it wont recognize my hardware. Needless to say, that under Mac OS X everything works just fine.
I have Mac Pro 2014 Quad-Core intel Xeon E5 with AMD FirePro D300 graphics. Yesterday I updated my OS from Mavericks to Yosemite and now i can't choose resolution 2560x1440 (only max 1080i available) (i use monitor Samsung LS27B970 WQHD and HDMI connection). What can i do?
Info:
Mac Pro, OS X Yosemite (10.10.1), HDMI connection
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
Information:
G5 Quad
Mac OS X (10.5.1)
1440x900 resolution of the new MacBook Air 13.3" screen is simply too high, making everything way too small and straining on my eyes. Is there a replacement LED LCD panel with a lower resolution (1280x800 like the old MBA) that could be retrofitted?
View 24 Replies View RelatedIt is clear there are people who love their high-res antiglare display; the ability to have more pallets open in Photoshop, see more of what you are doing in Logic. However, there is a fair few of us who dislike the high-res because of decreased fonts, smaller graphical interface things.if you had the choice to go for a high-res or normal res antiglare 15", what would you go for?
View 13 Replies View Relatedi am using a hackintosh for a week now. I am using it just to get used to Mac OS X because i am switching to a Macbook Pro in a couple months. I switched from PC to Mac officially now. OK, let's come to the main topic of this thread;-At first, my hackintosh couldn't get my gfx card, i couldn't find the driver(kext) so my resolution was very bad. Everything was huge and blurry. I couldn't even look at my 17" Samsung LCD screen. I made an entry to file which was something like this
View 14 Replies View RelatedWho has actually played games on BOTH the 2010 high res and standard res macbook pros?Reading through that gaming benchmark thread isn't much of an indicator as most people don't post their resolution and if they have they have only played on one or the other.Im trying to get a better indicator on the performance difference with newer games. Are we talking 2-6 fps drop or 10-20 or more?
View 17 Replies View RelatedSo i'm trying to figure out the best resolution for using my macbook pro in clamshell mode. I think ever since i installed snow leopard the new resolution choices i have are not longer pixel x pixel, but actual TV resolutions, such as 1080i, 720p, 420p. In the past I've used SwitchResX to do custom resolutions for my tv but that dosnt seem to work anymore.
I'm trying to find a resolution where text is easy to read. 1080i looks pretty but text is extremely small. 720p the text is larger and easy to see but is very fuzzy and not easy on the eyes. I guess this has something to do with the pixels on a tv being farther apart than that of a computer monitor. It's a 32" LCD TV. I'm using a DVI to HDMI cable (Non-Unibody Macbook Pro).
1) Having a difficult time finding anything good on this. Anyone got direct comparison pics between the two on the 15"?2) Also how much brighter are the mid-2010 15" displays compared with the late-08 15" displays? IIRC the 2009 screens got a wider color gamut and more brightness than the original unibody screens.
View 24 Replies View RelatedHow does the Antiglare screen look? Does it look cheap and flimsy like the matte screens on the pc laptops?This is my first Mac and i'm looking at going all out and getting the top of the line 15". I know I definitely want the HD screen, i'm just not sure which screen looks better. What about a 5400 vs 7200 rpm hdd? Is this upgrade worth it?
View 24 Replies View RelatedFor those who would like to try adapt to hi-res screen of the 15'' but the not sure if they can, if they can't adapt to the hi-res, it's possible to set the resolution to 1440x900 with no appearence differences from the standard res screens?So the appearence and quality of the hi-res screen set to 1440x900 is the same of the standard res screen?
View 4 Replies View RelatedI guess this is one of the early MacBook Pros, model "MacBook Pro 1,1"Â It's two RAM slots originally could handle 1GB DDR2. Is that still the maximum, or are there 2GB chips for those slots available today?Â
Hardware Overview:Â
Model Name:Â Â Â MacBook Pro
Model Identifier:Â Â Â MacBookPro1,1
Processor Name:Â Â Â Intel Core Duo
[code]....
Info:
MacBook Pro A1150, Mac OS X (10.5.8), 2 GB Ram, using FCE 4
I have a Macbook Pro Mid-2009 2.26GHz (10.7.4), and have 4GB RAM (2x2 cards), and at the time I changed it, not long after getting it, I am 99% sure it was only possible to get 4GB, but now Crucial is saying it is possible to get 8GB. I would have just got the max RAM possible, so was wondering if something has changed, (an update or something?) that has made it able to put more RAM in. Or, am I just mistaken completely and it was always 8 and I just missed it!Â
Info:
MacBook Pro, Mac OS X (10.7.4), 2.26GHz Mid 2009, 4GB RAM
what is the maximum RAM my 2010 MacBook Unibody will accept?
Info:
MacBook (13-inch Mid 2010), Mac OS X (10.7.4)
I have a 15in Late 2008, MBP (the first generation of Unibody) with 2.53Ghz (upgraded CPU speed) with 4GB of RAM. Will my laptop recognize 8GB of RAM and which RAM from Newegg should I get?
View 3 Replies View RelatedWhats the max memory I can fit in my black MacBook?
Model Name: MacBook
Model Identifier: MacBook 2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version (system): 1.13f3
Just wondered whats the largest capacity harddrive that would work in my Macbook unibody.
View 3 Replies View RelatedI'm trying to figure out how to change the maximum log file setting for my Cisco VPN. I think on a Windows machine you are able to do this:Â
[Instructions for Windows: right-click "Computer" on your desktop, and select "Manage". Expand "Event Viewer" and then "Applications and Services Logs". Right-click on "Cisco AnyConnect VPN Client) and select "Properties. There will be a "Maximum log size" and a "When maximum event log size is reached" option.]Â
I can't seem to figure out how to do this on my Macbook Pro. I'm running 10.7.4Â
Have tried viewing in Console and while i can see the ppp file - there's no way to see maximum file size settings.
Info:
iCal, Mac OS X (10.7)
I have a base level MacBook Pro I bought new in 2013. It has 4GB of RAM. I was wondering if it would be possible uprade the RAM past the 8 GB limit. I was thinking of somewhere in the neighborhood of 12-16 GB. Will this do any damage? Should I run Time Machine before I attempt an upgrade?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
