I keep getting a message when trying to update my computer saying my start up disk is full. I have deleted my trash can, a lot of photos and videos I had, and I don't have many files or apps. When I look at the startup disk it says that the memory is being used by "other" How do I find the "other" files?
Info:
MacBook, Mac OS X (10.7.2)
I keep getting a "startup disk is full" message on my MacBook, yet I have more than 50% of my 55gig HD empty. Haven't partitioned the HD. I've tried clearing the cache on my browser and running disk repair on the HD. I'm considering adding RAM (currently have 1 gig). I'm running 10.6.8.
Info:
MacBook, Mac OS X (10.5.8)
I keep getting a message saying my startup disk is nearly full when their is 104GB left.
View 2 Replies View RelatedHow do I clean my start up disk for more space? I have I cloud but don't really use it.
Info:
MacBook Pro, Mac OS X (10.7.4)
I bought a used mac and when I erase the disk, afterwards it still shows 2 files and 2 folders on the disk taking up 40+mb of space. What is that? When you erase the disk isn't it supposed to be completely empty?
View 2 Replies View RelatedI get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies View RelatedMy iPhoto is empty, however when trying to upload some photos from an SD card, I get the message, "Insufficient Disk Space. iPhoto cannot upload your photos because there is not enough disk space in the volume containing your iPhoto library."
Info:
iPhoto '11, iOS 7.1.1
Yesterday I switched on my macbook (Leopard) and got the flashing question mark. Ran all the resets and booted with disk utility which encountered an 'Invalid B-tree Node' when attempting to repair the disk. Additionally, the SMART status was verified.
I ran DW 4 last night, and performed the hardware tests which reported that the disk was operating like normal. The majority of my media files and additional work is backed up to my Time Capsule but I still have a folder of papers that are relatively new, and wanted to retrieve. While DW managed to reconstruct the majority of my drive (there seemed to be 15g missing - but it's just music files) including this folder, it couldn't replace the disk, as it encountered 'Serious Disk Malfunctions'.
So, via the Disk Preview I want to transfer my saved folders to my TC, but I don't appear to be able to locate it (via ethernet) through DW - even if it's connected when I boot up in DW. So, first request is: Can I connect to my TC to transfer across in DW's preview?
Second is: What are my options if DW can't replace? Do I need to take it into Apple and get a new HD (it's out of warranty)? It's possibly worth noting that I'm a student and have absolutely no money - so cost effective options are a bonus!
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
I have 2 internal Serial-ATA disks:
Both were checked (with Disk Utility and DiskWarrior) and are OK. But only one of the two disks shows in the Startup Disk list in System Preferences->Startup Disk.
PowerMac G5 / OS X (V.10.4.11)
3GB memory
Every time I try to restart my computer on my Hard Drive I get this message "Startup disk could not gather enough information on the selected disk". As of right now I am running my whole computer off of a 16GB flash drive that is quickly running out of memory. How do I fix my Hard Drive without losing all 150GB worth of data. I am running off of OS X 10.6.8 and have another iMac that is working fine.
View 2 Replies View RelatedI ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI am getting this warning. Not sure what to do or how to do it. Couldn't find any information on freeing space without erasing important files.
Info:
Mac Mini, Mac OS X (10.5.6)
my mac gives me the message that the startup disk is almost full, what can i do?
Info:
MacBook Air
I was surfing this site a couple of days ago when my MacBook suddenly froze up. I couldn't Force-Quit anything or do a soft restart, so I decided to just power-cycle restart (pressing the power button until it shut down, then pressing it again to start up). When I did so, my startup disk wouldn't mount.
I should give you a little background: Mine is a MacBook White early 2009, with upgraded 4GB RAM & 500GB 5400rpm Fujitsu HDD. I took the HDD from an off-the-shelf 2.5" external HDD. It has served me well for slightly over a year, and is only now giving me this problem.
I have since replaced the original HDD (which I was keeping as a emergency backup, phew) and put the problem HDD in an external FW enclosure.
I have run Disk Utility on it to try & rectify the problem. Disk First Aid says the disk is fine, but I just couldn't get it to mount. I thought I'd try to erase it and restore from my TM backup, but after I erased the disk, it still couldn't mount. What's worse, now the disk is apparently not writeable, and I can't even erase it. Disk First Aid is still telling me the disk is fine.
I've also tried booting from my SL install disk, but it won't mount the disk to install SL. It is still visible in Disk Utility, but greyed out.
Can anyone advise what I can do to recover the disk?
I can't really bring it in for a warranty exchange, cos I ripped this disk out of the original enclosure, so the enclosure is now completely busted, and obviously the warranty won't be honored. (Buying the external was cheaper than buying just the internal, and Fujitsu had a pretty OK reputation for their harddisks at that point. Could you blame me?)
So any software or hardware (or combination) solution would be great. Worst case scenario is to get a new HDD, but I'd still like to recover the use of this disk somehow.
I got an OCZ Vertex 2 120GB SSD and it runs fine and it's fast when using the computer. But the boot up time is so ridicules slow, slower then my old 500GB 7200RPM drive. My boot up time is around 37 sec with the SSD. The Apple logo came's up and the spinning wheel spinning forever!.
I think I know what the problem is, it's searching for like 25 sec for the first boot drive, and it can't find my SSD. Other people I know here on Macrumors just checked the SSD in the "Start up" in System Preferences and reboot, then they getting fast boot time. When I check my SSD and press reboot, it's still slow and when I later check the Start Up disk, none disk is selected (neither the SSD or "Network startup"...
Here is how it always look like when going in to System Preferences -> Startup Disk after a reboot, none is selected... (sorry for the Swedish language, I hope you will understand)
What should I do to fix this problem? (I've tried to reset NVRAM, PRAM and SMC, but with no luck).
I have an external hard drive also, but can I set up my external as a backup startup disk, and if so, how? If not, how and what do I need to delete from my startup disk to open some space?
Info:MacBook, Mac OS X (10.7.3)
My computer wont let me download anything because it says my start up disk is full. can anybody tell me how to delete stuff off of the start up disk?
Info:MacBookPro
I have a new Mac Book Pro and have loaded a few programs on it ..but do not have much else on it...and now its telling me that my sratch disk is full and will not let me do much of anything on it....
Info:
MacBookro, Mac OS X (10.7.2), Just switching from PC to Macs
I have onstall disks but can't boot up from those. How do I create one?
View 2 Replies View RelatedI have a Macbook. It is telling me that the Startup Disk is full. I have dumped the trash and went through my file dumping what I can. I realy do not have much on. I do have movie,music, and Lots of pictures? Do I need to purchase more Startup Disk? Where do I get that?
Info:
MacBook (13-inch Early 2008), Just up grade Memory to 4 GB
what to do when startup disk is full?
Info:
MacBook Pro, Mac OS X (10.5.8)
I lost the startup disks to my MacBook?
Info:
MacBook
Ive been deleting everything still have a bunch of other the yellow bar.cant figure out what else to deleted or where to find it....
Info:
MacBook Air, iOS 7.1.2
My MacBook Pro gets a message when I first start up on my log in page. When I then go to log in i just get a blank grey screen. Any clues as to what I can do. I've been downloading quite a lot of TV shows recently from ITunes and was going to move them to a external HD but I cant see anything.
View 1 Replies View RelatedI get error message " your startup disk is almost full"
View 2 Replies View RelatedSomething is going bad with my computer. Recently I have been getting the startup disk is almost full, but it is not. I have over a gig left and have tossed a bunch of stuff. I feel it was an email or something that was downloaded that is causing it to eat up all the memory. I have also done the Disk Utility and fixed it a couple times in a row. what is happening or what I can do to put my finger on it?
View 1 Replies View RelatedMy macbook air keeps telling me that my startup disk is full or almost full. I have deleted all video files and many music files. All I have added to it now is Spotify. How to clean up the startup disk?
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.6.8)
I recently tried installing Ubuntu on my MBP. After never really using it, I deleted it and removed all the partitions. My problem is that there is still some 'empty space' (about 5 GB worth) that I cannot re-add to the main HD's partition. The space is not a partition of it's own, I can resize the partition box down to it in Disk Utility, but I get an error.
The error message is...
Partition Failed
Partition failed with the error:
Mediakit reports the partition (map) to small.
While it's not a big issue (314 out of 319 GB)
How do I change trash from secure empty to just empty?
View 6 Replies View Related