MacBook Air :: Won't Let To Add Printer On Network Or See Other Macs In House
Feb 11, 2012I have a Macbook Air, 1.7GHz dual core i5, running 10.7.3 and cannot add a printer via the network or see the other macs in my house.
View 1 Replies
ADVERTISEMENT
OS X :: Shared Printer Not Visible To 3 Macs On Network
Nov 3, 2008I have my Mac Pro connected to my hp c3100 printer. It is shared, all sharing options are enabled on the Mac Pro. 2 Macbooks and an iMac cannot find or see this printer. Networking, screensharing, file transfers, they all work fine. Just can't see the printer. Is AppleTalk required to do this? Here's some screenshots from the Mac Pro. I have never tried to network a printer in Leopard, I seem to remember it was easier in Tiger.
View 5 Replies View RelatedHardware :: Setting Up College House Network With Time Capsule
Jul 20, 2009I'm moving into a house with 4 friends and we need to setup a home network which I am in charge of. 2 people have Macs and 3 have Windows. I want a central hard drive that everyone can throw their music and videos on to share. We also want wireless N. I was wondering if a Time capsule would be a good way and a good value or what the best way to set this up would be.
View 13 Replies View RelatedOS X V10.7 Lion :: Network - Can't Login To Network Macs As Registered User
Feb 20, 2012Have recently done a clean install of Lion onto a Mac Pro that was running Snow Leopard. Upgradede to 10.7.3  The Lion Mac sits on an office network of several macs running Snow Leopard and a Network Shared HDD.  In order to gain quick full access to the other computers we have been using "connect as" then inputting the macs registerred user administrator details, we were able us access to the full Mac and it's currently mounted hard drives. Since installing Lion I can see and fully access the network share which only uses guest access, see the Other macs in finder, add to their drop boxes but not connect as a registerred user to access one of the snow Leopard machines.  I get a pop up. Spinning wheel, and eventually a timeout. Can't even cancel this action as it comes up greyed out. Oddly the other macs can still log into the Lion machine. No joy so far toggling network preferrences and I'm pretty sure it's going to be a setting I have missed, So far have had not joy looking online or playing in seeing why it would now not be able to connect as before.Â
Info:
Mac Pro, Mac OS X (10.7.3)
OS X :: Unable To Use Network Printer / Error 256 Using Printer Utility
Dec 3, 2010I have been given an iMac g3 with osx 10.4.11 installed and airport card. My son will have this as his first computer. It is up and running and surfing the net using the airport connected to our home network. I have searched the forums and tried all the results I could find but am still unable to print from the iMac to my network printer.
iMac G3 10.4.11 osx slot loaded, airport wireless. Officejet all in one 6310 usb to pc running Vista. I have tried all the usual SAMBA and LPD methods listed going for generic printer, but get error 256 using printer utility, and NT_status_no_memory when using samba with all the settings, when trying LPD the printer service just stops.
I use LPD://user:password@workgroup/server/sharename and same for smb. I have set up a seperate account for the mac on the vista pc with password and started lpd service I've also edited the registry for lmcompatibility, printer sharing is enabled and both machines have the same workgroup name (WORKGROUP).
OS X :: Setup Printer Sharing From G4 To New 10.6 Macs?
Aug 8, 2010I'm trying to set up my old iBook G4 as a print 'server' for other Macs on my network. I'm having a problem getting the other computers on the network to SEE the shared printer from the iBook. They can see the iBook as a network computer, but can't seem to connect or even 'see' the usb printer. I've clicked 'Share Printers on the iBook in both Sharing preferences and the Printer and Fax preferences, but no luck.
View 1 Replies View RelatedMac Mini :: Best Printer For Macs / WinPCs
Apr 10, 2012I'm new to Macs, but have used iPad & iPhone for years now.Recently I got a new Macbook Air for myself, and a Mac Mini for my kids.I have a great Canon Multifunction printer (MF4150 I think), but it is USB only (No Wireless / No Ethernet) and is wired directly to my WinPC's USB port.So, I'm in the market for a COMPLETELY wireless printer.It does NOT need to be a multifunction device.I've perfectly happy with laser only, or with a printer that is economical with the black ink.It must be easy to setup on the Mac, my Windows PC, and my iOS devices.I'm not a novice with techie stuff, but am still very new to Macs.I can take some complexity, but whatever I buy I want to have good instructions, or very easy setup.Needs are fairly basic: Primarily document printing in B&W.If I get a color printer, it would only be used for color occasionally.
View 1 Replies View RelatedHardware :: All In One Printer That Will Work With Macs And PCs Over Wifi?
May 8, 2009Can someone recommend a good all in one printer that'll work with macs and PCs over wifi? Print quality and reliability being major factors as well.
View 14 Replies View RelatedOS X :: 2 Macs, Same Network, Only One Can Connect?
Oct 21, 2010I have two macs and strangely one mac is unable to connect to the internet via airport while the other one can via airport. What gives?What I'm observing is that when I open up Network Preferences in both macs, the Airport says its connected on the working one while it says no IP Address on the one that's not working.
However, when I change locations so that both macs have the same locations, the one that's not working says, Self-Assigned IP, yet, still no connection.One more thing, I also notice that in advanced settings under TCP/IP, both macs have two different IPv4's.
OS X :: Network Macs Show Up Twice
Dec 8, 2007So my network is now exclusively Mac, yet in the sidebar in the Finder all my network Macs show up twice, but the 2nd one always has the BSOD icon. The MyBookWorld is my NAS drive that always shows up as a windows server because it has to connect via SMB. Anyone have any idea how to get my Macs to show up only once though? Besides it looks ugly with all those BSODs on the side,
View 13 Replies View RelatedOS X :: Network Chat Across Two Macs
Mar 23, 2009I guess the answer to this might be iChat, but I've got two iMacs on my home network. My wife and I work on them, usually at the same time, and it would be great if we could just open a quick chat window to swap small files, links and bits of text back and forth as we work. At the moment we use the Finder and copy, paste, drag, etc. But there must be a quicker way. Back in the olde days there used to be a network message thing you could use. I guess iChat would be easiest if we both set up a login each and keep it running in the background?
View 5 Replies View RelatedOS X :: Getting Two Macs On Wireless Network
Jun 2, 2009I am using a dsl wireless router to create a home network (damned if im gonna pay 2 bills for a japanese cable router) every time I connect, the internet service provider intercepts my link and forces me to log in, when I try to log in on another computer it does the same thing, but I can only log in one computer at a time on the same user id.
Is there a way to split the connection from my wireless router to each mac without the service provider recognizing it is two separate machines? This is legit, if I shell out the 2 bills for their wireless router I can log two machines in, so its not like im stealing service here, just trying to get my wife and I on at the same time without having to buy new hardware that is redundant.
Software :: Cannot Network One Of Two Macs
Jun 14, 2009I have a MacBook (Intel 1.83 GHz Core 2 Duo) and an iMac (2.16 GHz Intel Core 2 Duo) and I can access the entire MacBook's file structure when I access it via the finder's "connect as" feature. I could do the same thing when I connected with the MacBook to the iMac, but a couple months ago I stopped being able to do this. One notable difference is, when I click the "connect as" button on the iMac I get a dialogue box that lets me enter the username and password. On the MacBook, I get no such dialogue - the finder simply tries to connect (spinning wheel in the bottom of the finder window, "connecting..." displays above the button) but it never seems to time out or stop. I have checked the sharing configuration on both machines, and they seem identical - I can't find a single setting that is causing the disparity and therefore the one-sided connection problem.
After quite a few searches online, I also found some advice that suggested I delete old keys related to this in my Keychain and use the Keychain Manager to repair all the existing ones. I did this, re-started the machine, and still no joy. All permissions have been repaired since I did this - no difference. While I suspect this is a system issue, I doubt it - the system has been re-installed completely off the same disc as the iMac, and is running the same latest revision of 10.5 as the MacBook. There seems to be no real difference - and as you can see from this email, I can connect to the internet on the same network, and have no other problems - I can even Screen Share with the iMac (which seems stupid, as it lets me completely control the iMac from the MacBook, but I can't access the files directly and run them in the MacBook.
Software :: Macs Cannot See Each Other In Network
Oct 9, 2009I have a network of around 13 emacs, they're connected via ethernet to a router with a dhcp server. The emacs can browse the internet without problems, however they can't see each other in the network. I have activated the file sharing service, checked the permissions, but I still can't get them to see each other.
View 7 Replies View RelatedOS X :: Can Use An Airport Extreme On A Network With Macs And Pcs
Nov 6, 2010I want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
View 3 Replies View RelatedOS X :: How Do I Share Between Two Macs On The Same Wireless Network?
Mar 4, 2009This is probably very basic but I don't know how to do it.I have an iMac (2007) running Leopard. I have an iBook (2004) running Tiger. They both share my home wireless network.
How can I best share documents between them? Eg how can I browse the hard drive of each machine from the other- ideally without entering passwords etc every time?
Additionally, the iMac is connected to the printer (because it is also a scanner); can the iBook share the printer too?
OS X V10.5 Leopard :: Can't See Network Printers While Other Macs Can
Mar 12, 2012There is one Mac on our network that can't see any network printers, but all the other Macs can see the network.
View 1 Replies View RelatedOS X :: Creating A Small Office Network Using Macs And PCs?
Sep 13, 2010I wish to network an Apple Power Mac G4 (AGP graphics) using OSX and an Apple Beige G3 using OS9.2 to an ESystem Ei302 PC using Windows XP. I know it can be done but I'll be damned if I can work out how to configure it all and I have gone through Windows Network Set Up and still can't seem to fathom it. I have BT Business router and have connected all the units with cat5c 'straight through' patch cable to that and although I can connect to the internet through the G4 and the PC, I can't get any of the computers to see each other.
View 1 Replies View RelatedOS X :: Syncing Two Macs Via A Network Drive With A Different Filesystem?
May 13, 2010I've been looking at how to sync my two Macs.
There are lots of options out there but none I'm comfortable with:
DropBox. It appears that what people do is put their data files into the DropBox folder locally (or make symbolic links to that folder) and DropBox then monitors this folder locally, if changes are made it propogates the changes to their server and then out to other machines/devices under your account.
I could be wrong and it monitors both local and server.
Anyhow the trouble I have is that I've got tens of gigs and I don't see why I should ever have to take the bandwidth/time/security hit of using the Internet as the go-between.
Plus I'm uncomfortable with DropBox acting as a blackbox; i.e. no idea the logic it's using to determine changes, determine conflicts or manage resolution.
JungleDisk/BackBlaze with Chronosync. Using Chronosync means that you have full control and transparency, i.e. know logic and have logs.
I was going to put aside my concerns of using cloud storage (bandwidth/accessibility/security), however JungleDisk just purged around 60 gig of my data because a 2USD invoice failed to process and I was completely unaware of the invoice processing failure. So for now, cloud storage is out.
(if I do go to cloud, I'll try BackBlaze next time as JungleDisk clearly can't be trusted)
Sync over LAN between two Macs (e.g. via Bonjour) and use Chronosync to perform the sync.
Not a bad setup, but I've got the feeling that placing a third disk in between, is somehow cleaner and gives overall better protection.
Therefore I've decided to keep two Macs in sync, to use Chronosync plus a NAS (in my case a QNAP 639-pro) as the middle man.
Others must have done a similar setup (after all it's just a variation on using an external drive as the middle ground).
So some preliminary questions are:
do I need to be concerned that the NAS uses EXT3 (Linux) fielsystem; i.e. will ownership/group permissions or
extended file attributes be an issue?
Is there an issue with not syncing file metadata (.ds_store files comes to mind)?
Syncs take a very long time when you've got tens of gigs, however often it's just a handful of files changing, i.e. OmniFocus, Devonthink, 1Password plus a few active project files. So it seems it's a good idea to have a full sync and some quick sync.
Do people have a similar setup and can describe their Chronosync configs?
It would appear the safest option is to close down 1password, OmniFocus etc. on one machine before hitting sync on that machine, but this introduces overhead, but I guess it depends on how the likes of 1Password writes to file and when
OS X :: MacBook Not Selecting Network Printer
Mar 26, 2009I'm trying to print some documents from my new MacBook aluminum. The printer is connected to a computer which is running Vista. I can print documents from my old dell laptop and my PC desktop which are both running XP over the network. I can also share files between them all. I can see the files that are shared with the MacBook but I cannot select the network printer. Please keep in mind that I am new to OS X leopard.
View 4 Replies View RelatedHardware :: Transferring Files Between Macs On Wireless Network?
Feb 25, 2008I need a little help with transferring files between my MacBook and my iMac on my wireless network. I'm using an AEBS (the newest one, just got it last week) and both computers connect to it through their AirPort cards. After fooling with my router for about 30 minutes after I got it I was finally able to connect to the internet, and after about 6 more hours I was able to wirelessly print so yea, I am pretty much a noob when it comes to wireless networking.
So my question now is, what is the easiest way to transfer files between my two Macs on my wireless network? I've tried copying files into my "Public" folder on one Mac and then accessing it on the other and that works fine sometimes but it's too time consuming and file permissions are killing me! Do I have to set the permissions on each individual file or folder so that all users can read and write to them when I transfer them? And better yet, can one Mac ONLY access the files in the "Public" folder of another?
OS X :: Sync Folders Between Two Separate Macs Over The Local Network?
May 26, 2008How do I sync the contents of say, the desktop and documents folders between my Mac Pro and Macbook Pro so the same files are always on both? I only want to do this over the local network because these folders are enormous and I need the syncing done fast.
View 4 Replies View RelatedOS X :: Copy Dual Layer DVD Via Network Cable And 2 Macs?
Dec 10, 2009I've got a handful of dual layer DVDs of which I'd like 1 copy of each.
To save time I wondered if I could plug my machine to my mate's machine via a network cable, with the original DVD in one mac, a blank in the other, and just hit 'Copy' in Toast?
AFAIK the write machine can only do 8 speed - would the data throughput via the network cable be fast enough for this?
If not, any way of doing it via Firewire?
OS X :: MacBook Printing To Network XP Printer - Hangs On
Nov 3, 2008I'm trying to connect my leopard macbook to a Canon Pixma MP210 that his hooked up to an XP machine. Sharing is enabled in XP on the printer and I can successfully add the printer to the mac in system preferences. I've downloaded the proper drivers from Canon's website and selected them for the printer. The problem is that when I try to execute a print job, the print queue comes up and hangs on status "printing."
Also, on the XP machine, the print queue recognizes a job is being requested but the status hangs on "spooling." The document never actually prints. Finally after a couple minutes, the print queue in the mac has an error stating: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
OS X :: Using Printer On Windows XP Network (Drivers For MacBook)
Mar 1, 2009I just set up my printer on my home network, and it works with my two wireless PC's, and now I am trying to add it to my 3 macbooks, but I am having some trouble. I connected to it through system pref > print/fax > selected my printer. It connected and works sweet, but, the driver must be wrong. I was not sure what the driver was so I just chose GenericPostScript but when I print, a blank sheet comes out, no text. The PC's print just fine, but not my MacBook. It is a DELL printer connected to my dell PC, so I am not sure what driver to use. All I know is it is a Dell AIO 926.
View 2 Replies View RelatedMacBook :: How To Install Printer For Using In Wifi Network
Feb 14, 2010I have D-Link 824VUP and printer Xerox 6115 connected to dlink by usb, and macbook also, The question is "How to install printer for using in wifi network with my macbook?"
View 1 Replies View RelatedOS X :: Switcher - Connecting Printer Over Network To Macbook Pro
Jun 21, 2010I just switched to my MacBook Pro and I just had a quick question. I have a printer hooked up to my desktop PC and it runs over our wireless network. I was wondering how to connect my macbook to the printer, because when I go to the printer and fax section in System Preferences, I can go to the computer on the Windows section, but it won't find the printer.
View 1 Replies View RelatedMacBook Pro :: Connecting Wireless Printer To Network?
May 31, 2012My MacBook Pro is connected to a wireless Belkin network with no issues, but I cannot seem to add the printer to the same network.Â
Info:
Mac Pro, Mac OS X (10.7.4)
MacBook Pro :: Add A Printer To It From My Home Wireless Network?
May 31, 2012I have a wireless network that includes a printer, a pc, and my MacBook Pro. When I go into system preferences and printers the wireless printer does not appear in the list. What do I need to do to add this wireless printer to my MacBook Pro?
Info:MacBookPro, iOS 5.1.1 When I go into system preferences and printers the wireless printer does not appear in the list.
MacBook Pro :: Unable To Locate Hp Printer On Network?
Jun 22, 2012My MacBook Pro is unable to locate HP Photosmart Premium eAll-in-One on the network... Wirelss printing cannot work.
Info:
MacBook Pro, Mac OS X (10.7.4)
