Does anyone know of where I can find PCI-express cards to addon USB and/or Firewire ports to the Jan '08 Edition of the Mac Pros?
I keep running into the cards that are meant for older Power Macs.
I'm installing some firewire cards in a mac pro at my school but the Mojo that we're hooking up needs to be on it's own bus. Do certain pci slots share a bus together?
View 4 Replies View RelatedI currently have my second MBP that I got from Macmall and both in a matter of two weeks have had similar issues. The first I managed to get returned and replaced, that is a seperate and complicated story in and of itself. This particular issue started with a boot up sequence that was taking about 5-6 mins. After going through the drill with Applecare thought I could restore using Time Machine. That's when I found out that the FW400 port no longer worked to power my Oyen Digital 250G FW drive. Any thoughts as to what might be the problem? This is my second MBP and Oyen Digital FW drive. I had them both replaced!
View 10 Replies View RelatedI just got a Mac Mini (March 2009 model) and want to connect it via Firewire to my Sony TRV-22 camcoder. The camcorder has a Mini DV Firewire jack on it (I think this is called a 4-pin connector sometimes too). But on the Mac Mini, I can't tell if I need a 6-pin or a 9-pin. Can someone point me to a good cable so I can dump some MiniDV tapes into iMovie?
View 5 Replies View RelatedI googled it and it didn't help out as much. I have this Shure Mic and it has MIDI input and would like to have some kind of adapter to firewire. I know there is an USB adapter, but i would like to use firewire. It can be firewire 400 or 800. I like to record some songs for GarageBand.
View 3 Replies View Relatedcan I put firewire connector 400 in the firewire port 800?
Info:
iMac, Mac OS X (10.7.4)
i need more firewire ports for my macbook, do they sell firewire hubs?
where can i find them?i googled for it, but it was very confusing, found a lot of USB hubs and some other stuff, but not a FIREWIRE HUB perse.
I have a somewhat old Seagate FreeAgent external drive (like this).
It has a switchable port controller, one has a USB2 and eSATA and the other has two FireWire 400 ports [URL].
Now, on the FW controller it says "Dual FireWire 400".
What is Dual FireWire 400? And does it implicate that I can use both ports together somehow and get FW800 by that?
I just got the external harddrive "Seagate FreeAgent GoFlex USB 3.0 1TB" with a Seagate FreeAgent GoFlex Upgrade Kabel FireWire 800. I have neither a USB 3.0, nor a Firewire 800 on my white macbook (2008). I already know, that it's possible to use USB 3.0 with an USB 2.0 port, but I would like to use it with the firewire to spare the USB port for other devices. My question: Is there an adapter or cable to use the Seagate Firewire 800 with my Firewire 400 port? I don't know, where and what to look for.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.6.8)
i just thought it was compatible because it said it was made for the mac and i really wanted to use my surround sound system. So my dilemma is that it came with a firewire 400 cable and I have a firewire 800 port on my mac mini which i bought recently. I've looked for some adapters and I saw one that said it accepts male firewire 400 6 pin and at the other end is a 9 pin firewire 800. it says its designed to connect your firewire 400 cable so it can be used in firewire 800 ports for newer macs. I'm not 100 percent sure what all that means and I didn't want to go buy something without being sure that's what I need.
View 8 Replies View Related1. I have seen people with clear docks, and I was wondering how that can be done? As the cleardock app only works with 10.4 and lower, what is there on SL that can do the same thing?2. How can I tell which of the gfx cards is in use? and if I want to game how do I make sure that the 9600 is used?3. What MSN compatible message clients work with the built in webcam?
View 1 Replies View RelatedActually, I don't even know why I was looking at graphics cards for the Mac Pro - I don't even own one. But every now and then I look them up. Anyway, the Australian store only has 3 cards:
- EVGA GeForce GTX 285
- NVIDIA Quadro FX 4800 and
- NVIDIA GeForce GT 120.
The first two have suddenly been discontinued - they were available at least a couple days ago, so it could've happened during todays store update. I have checked the UK store, they're still available... can't check the US store right now cause it's down again. [EDIT] US store up - they still have them for delivery[/EDIT] Anyway - what do people think this means? (Aside from us Aussies getting the short end of the stick again
I upgraded my G4 Mirror Drive system to a new(ish) G5 2Ghz DP system, which sadly has nothing but PCI-X slots. Other than possible server stuff, what can you do with them?
I was annoyed when I realized it... I had a PCI card in my G4 with four USB2.0 ports and was hoping to migrate it to the G5 but, apparently not. Unless there is a 'trick' to make it work... like making the 9600Pro work in my old G4 using tape and covering up pins etc.
I need to set up the NVIDIA GeForce GT 120 for the GUI and leave my ATI Radeon HD 4870 for GPU.
Info:
Mac Pro, Mac OS X (10.6.8)
So if I have a GT 120, and I buy a 4870 of newegg, can I flash it? Also how loud is this card? I used to have a alienware desktop with a GTX 280 and it was loud as all hell. Also can I switch between graphics cards when not gaming?
View 1 Replies View RelatedI currently got the 5870 driving a 30" ACD and 23" ACD. Would there be any noticeable performance increase if I were get the gt120 to run the 23" and have 5870 run the 30" ACD (my work display)?
View 18 Replies View RelatedCan anyone confirm that NO PCI cards will work in the mac pro PCI-E slots?
View 2 Replies View RelatedI just bought a new MacPro last week (and really love it). I asked the people at the store to replace the standard graphic card with the Nvidia GeForce 8800.Apparently they 'forgot' to take out the original ATI Radeon card.Reading through the forum I found out that the two cards don't work together. No sweat, since I originally only wanted (and paid for) the Nvidia.
Here's my question: which card does my mac actually use? Does it always use the better Nvidia card? Should I take the ATI Radeon card out, or leave it there just in case I ever want to use 4 monitors?
I'm thinking of getting myself a Mac. I have not decided on much more than this. Well, a few things have been sorted. I'm either going for a MB 13" as a nice little e-mail and surfing companion or I'm getting the next iMac. If I would go for the latter then it would have to serve as a gaming platform as well and preferably for a couple of years.
Since gaming will be a good part of the duties performed by the dear little thing I must ask what we could expect in terms of graphics cards?
I'm aware that Apple often use last generation GC in their computers so a GeForce GT 120M is probably out of the question.
I have a Mac Pro and two video cards, and am upping the setup to a new Nehalem Mac Pro with the ATI 4780 card + NVidia GT120 card. For illustration purposes, I will use those two cards to frame my question, as we seem to be pretty familiar with their specs by now. My question is somewhat conceptual, and is difficult to explain, but I am counting on the MR collective intelligence to sort it out! I'll use a few scenarios to illustrate my point: Scenario 1: Heavy use of the 4870 card, using both outputs (two screens). Naturally, performance is better than using the GT120 card.
Scenario 2: Same heavy use, but this time one port from the 4870 is used, and one port from the GT120.
Scenario 3: Same heavy use, but both ports on the 4870 are used, and one port on the GT120 (three screens total)
Scenario 3: Same heavy use, but both ports on the GT120 are used, and one port on the 4870 (three screens total)
How do software applications deal with two video cards? Would running Aperture, FCP, gaming etc., degrade just one screen? Wouldn't the whole application have to slow down to accommodate the lesser card? Is there a "primary" card and a "secondary" card designation? I'm thinking of multiple monitor setups (three, for example) where a lesser card is necessary to drive the extra screen, but the application is using all three.
For the early 2009 macpros with PCI x2 slots (2 at 4 slots and 1 at 16), can I use a PCI-X on a PCI-X2?
I am looking for an esata card but i haven't found any that are in PCI-X2, many are PCI-X...
Is this any better? I know in 10.5 to switch between video cards (on the laptops that come with two) you had to log out and log back in. I've heard Windows can do it on the fly.
View 2 Replies View RelatedApple only allows OSX to be used on Apple hardware. How is flashing a non Apple video card different to building a hackintosh?
View 6 Replies View RelatedMy business partner recently bought a Quad-core 2009 MP with 2 nVidea GT120s installed to run 3 monitors. He is rather disappointed in the performance of the cards (slow scrolling and lags in rendering), and wonders if adding an ATI Radeon would work. Ie., possible to have 3 cards installed, mixing the two brands (1 monitor per card)? Or even using 1 ATI (2 monitors) and 1 nVidea (1 monitor)? Anyone know if this will work OK? The forum thread on the audio problem was a great help in solving another issue (well actually not solving, but using smcfancontrol to lower the temperature of the machine when playing music in iTunes) so once again here is a question for the well informed on this great forum.
View 3 Replies View RelatedI'm currently working on completely migrating from my PC to my Mac (having kvm switches here and there has got very tiresome and I'm now very much restricted for room.) So I've set up boot camp and I am able to dual boot between OS X and Windows 7. I have two graphics cards currently sat inside the Mac, 1 ATI 4870 which I use with Snow Leopard, and a GTX 280 (which I've pulled from its water cooled environment in my PC) to use in Windows.
Now the problem, I use OS X exclusively for productivity apps like FCS3 and Adobe CS4, and wish to use Windows preliminary for recreation and games, which is where my GTX280 comes in.
Currently I have both cards in the machine, naturally OSX doesn't detect the 280, and I am fine with that. In windows I am able to utilize both cards, Windows detects both cards, installs drivers for them and works no problem running games on either card (preferably the 280 as it's relatively more powerful)
But that's with the aid of an additional PSU to separately power the 280 as the 4870 uses up both of the 6-pin PCI-e sockets on the Mac Pro Logic Board.
My real question is, am I able to buy two 4-pin molex y-splitters (still allowing the power to the DVD ROM drives), and then using the spurs to connect those to a '4-pin molex to 6pin PCI-e connector'; with addition to getting two 6-pin PCI-e Y splitters and connecting the 2 spurs to both the 4870 and the 280 via 6 to 8 pin PCI-e connector? -- Yeah the 280 is a power hugry card!
I've contemplated this myself knowing that the Mac Pro as a rated 1KW PSU, what concerns me is the PSU rails. Even if I can get these connectors to wire up the 280 with the built-in PSU, I don't know if the PSU's rail's will be able to provide the current required.
Are all pci cards compatible with mac?
I've not looked it to this yet, so I'm totally in the dark.
So i bought a PCI ATA expansion card for my G4, but the bloody thing won't work. Despite having a Mac logo on the box, the drivers for the card are only compatable with Windows...
My question is, are there any PCI ATA cards around these days that are Mac compatible and dont cost an-arm-and-a-leg?
I currently have 4GB in my Macbook Pro. I'm realizing that this isn't sufficient. I like to edit photos and have Photoshop, Lightroom, and a web browser open at the same time. I'm pretty sure that maybe 10GB of RAM will do (I'd buy one 8GB card and keep one of the 2GB cards already installed), so in case I would need to upgrade again I could buy another 8GB card. Is it possible to have two different sizes of RAM in the two bays? 15-inch Macbook Pro (Early 2011) 2GHz Intel Core i7 4GB 133MHz DDR3
Info:
MacBook
Pro, Mac OS X (10.7.3)
i have a powerbook with a crummy internal soundcard. i want to add 5.1 surround sound to it but i cant seem to
find a mac compatible external sound card. Some people say that the sound blaster extigy is compatible but mac support is no where to be found on the extigy web pages. Can anyone confirm that the sound blaster extigy is compatible? and or list a couple other mac compatible external sound cards which are under 200 dollars?
Does anyone with a Mac Pro '08 and up run it with 2 high end cards? ATI 4870, 5870 and/or GTX 285 are the ones I'm thinking of.On my MP '09, I currently run a 20" off the GT 120 and the GTX 285 on a 24". I have another 24" coming in (the Apple LED), so it requires me to use the GT 120. For gaming purposes, I'm considering getting a 2nd high end card for the new 24" instead of letting the old 20" act as a slave on the GTX 285 (trying to minimize load on the gtx285, again for gaming).
View 4 Replies View Related
