My 23' Cinema Display died after 5.5 years of use. I was at the Apple store wanting to buy the new 24" LED display only to be told that it does not work with my 2008 Mac Pro. This totally pisses me off considering I spent 1/2 hour waiting for a staff to attend to me, and after numerous rounds of checking with the Genius, to be told that it will not work. At this point, I am very upset with Apple and their silly display port strategy. I am wondering what are my options? I have no desire to throw $2k on a 30" and I am wondering if anyone has a suggestion?
I was given a 1999 model. The power supply has died. What are my options? Should I even bother? Its in great shape otherwise. Can I get a 3rd party supply? How do I check this to see for sure that it is bad?
So, I think my PM G4 finally died. I had been using it as a media annex (not center) in my living room since my 22" Apple Cinema Display still works fine. Now I'm stuck with a 22" monitor that can't be connected to anything. I've been looking into what can be done. Based on an Apple Support Document, there is a M8661LL/A part called "Apple DVI to ADC Adapter" that I think will do the trick. If I get it, I should be able to hook my PowerBook G4 up to it, right? If so, the next task is to find the sucker. searching online for the part number didn't yield much, but I did find a nearly identical product number, the M8661LL/B on Amazon for $90 (yikes!!). The only difference is the suffix letter. But I don't know enough about this to really know if it'd work.
the screen went blank today, and connecting an external display wouldn't work. guessing it is the nvidia issue, and will be bringing it to the apple store first thing tomorrow. for now, there are some files i'd like to retrieve from the laptop. any idea how to login using keyboard shortcuts? if i can just enter my password, i should be able to access my files through network using my user credentials.
I am actually trying to decide if to get the old 30" cinema display or not.I'm a graphic designer and my fear is that apple will never make a matte display...Here in Italy it's still sold in the apple store. I have the unibody macbook pro, and so I've been reading through reviews now for a week ... my biggest concern is the dual-link dvi adapter... I still see posts (August or September 2010) with people experiencing issues, even with the firmware 1.3!I wanted to ask you people if I should go for it or dig the 27 inch even though it's glossy... I have a few people in the office (also graphic designers) working on iMacs and got used to the glossy.
I just received my MBP back from AppleCare. Its about 1 year, 3 months old. The display died, and they replaced part# 605-1211. It states on the Service Details: Parts Used: 605-1211 SCV, PCBA, MLB, 2.2GHZ I take it MLB stands for Main Logic Board? What does SCV and PCBA mean? Also, the repair center scratched the bottom of my MBP.
The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
I own 23 and 30" Cinema Displays. I like the 23 because everything is larger and easier to read than in the 30". I mostly work in Logic and love that I see lots of things on the 30" but the 23" is much easier on my eyes.Is there such a thing as a display with 2560x1600 (like the 30" Apple) but that is LARGER than a 30 inch so I can see everything bigger in Logic??? Maybe a 34 or 37"? Did a search but haven't come up with anything other than other 30" displays.
As the title says, I need a new monitor for my old G5 as the old monitor for it went bust. Apple does not make the old displays that came with the unit anymore and the only available monitor is the new LED ones ? but they all come with mini display ports
I am looking for a display to use with my Powerbook G4 12". I am in love with the 30" cinema display, but according to technical support today, my setup is not compatible (supposedly, but the person on the phone didn't sound to sure). I have a mini DVI, but the 30" requires a dual DVI. I think the 23" display requires DVI, which I can attain with an adapter. Does anyone have suggestions for what I can use with my computer? The bigger the better for me. Also what do you think of the older (plastic case) apple displays?
Purchased a brand new 27" i7 imac a few weeks ago, display is awesome!!! I was using my old 28" LCD monitor from my PC and running dual displays on the iMac. The 28" LCD monitor annoyed me a bit because i could not get the same color/crispness/brightness that i got from the iMac. ( also it has a Matt screen and i am more into the glossy screens ) So i found a used 24" cinema display locally. Paid 600.00 and it came with 2 yrs of AppleCare. It is only 7 months old ( still have 5 months under orignal warranty ) Got home, hooked it up and it had a "hint" of yellowness to it, It wasn't a exact image of my iMacs display...I tried to calibrate it also, but it still had just a HINT of yellowness....Nothing at all major, but enough for me to be annoyed with it.
I have a 2008 Mac Pro with ATI Radeon 2600XT and a 30" Cinema Display. I am considering buying a Wacom Contiq 24 HD screen/tablet and would like to know if the Radeon 2600 will drive both or will I need a second graphics card? If so, do I buy another 2600 or can someone suggest something suitable?
Info: Mac Pro (Early 2008), Mac OS X (10.7.4), 30" Cinema Display, 10Gb RAM, 2 Tb
I am thinking of updating my home studio setup which is currently running a Macbook pro 13" 2.26 with 4gb of ram. I was first thinking of upgrading to an iMac with a 3.06Ghz processor and 27" display. However, I now think I might be ok staying with my MacBook and upgrading to one of the two displays;- The 30" Cinema display- Or the 24" Cinema LED displayAt nearly half the price I am leaning towards the 24" display. I am using logic and ableton. What does everyone think and anyone had any experiences running logic and or ableton with a MacBook and display.
My early 2008 2.8GHz 8-core Mac Pro died last week. I tried all the usual stuff and ended up taking it to the local Apple store genius bar. They ran their diagnostics tool on it and did not find any problems so I had to leave it for a more thorough test. The Apple Store called a few days later and said it was either the main logic board and/or one or both CPU's. They -say- they replaced the main logic board and that did not fix it. They told me it would be ~$2800 USD plus labor to replace the the main logic board and both CPU's. So I took the machine over to another authorized Apple Service center for a second opinion. This other service center seemed confident they could determine which component(s) are defective. I am expecting a call from them on Tuesday of this week and hope to find out more then.
The symptoms are: When powering the machine I hear the startup sound and the display shows the apple logo. The machine boots for a little while (disk activity is heard) then the machine freezes for about 30 seconds then reboots or just freezes indefinitely. This happens with my 10.6.5 boot system, a second 10.6.x boot system on another internal drive as well as from the 10.6 SL DVD installer disc. Apple could not boot it off their network based systems either. Same symptoms on all startup disks tried so far...
So, I'd like to know where to go if I need to obtain parts and do the repair myself. I've built a number of PC's in the past and have no concerns about the undertaking. I just need to determine which parts I need. I'm not looking to "upgrade" the machine however if faster CPU's are available for a similar price I'd probably opt for the upgrade. At this point I'd be completely satisfied replacing the defective components with the same stuff that's in the machine now. Any pointers/links/tips/etc. would be most appreciated.
As you can tell by the thread title I've got one of the latest model iMacs and I'm running an LED Cinema Display as a second monitor. When it gets to the late hours I like to watch some movies on the Mac so I figured the Cinema Display would be a nice addition to do the job.
Now here's my issue: if it's late and I'm watching movies I tend to not have any lights on, but having one of the displays on means having both of them on, what I'm wondering is if it's possible to sleep one display while allowing the other to stay active so I can watch the movie without the light from the other one distracting
Right now i'm using Apple Cinema Display 20" that i bought at the end of 2005. You know, the aluminum one. But i've taken interest in one of those LED Displays, especially the 24"...
Now, i've read that the LED Display uses glossy display compared to the Cinema Display? Also, it's completely my own opinion, but the older Cinema Display seems to be looking more nice also having one-coloured.
The technical specifications are in favour of LED Display of course, but taking into account the glossy display, less attractive design and so on... Which one would you get?
I need a cinema display but the new is expensive, apple will release a new 20 inch? I wait for see? or buy a used cinema display 20inch? by the way any store that still sell new ones?
I know there are people in these forums who have an Apple LED Cinema Display hooked up to a PC with a Mini-DP to DVI converter. My question is, how do you guys adjust the brightness of the display? Is it always just left at max brightness? Does the LED Cinema retain the display brightness of the last time it was used... for example, if I hooked up a Macbook Pro to it first, turn the brightness down to halfway, and then hooked up my PC, would the brightness then be at half instead of full?
Does there exist a video card that has Mini Display out and is compatible with the original Mac Pro? I had a 23" cinema display that was repaired by Apple and then manhandled by UPS (multiple times, actually). Apple is sending me a new 27" LED display. My computer is the original Mac Pro 1,1 with an nVidia 8800gt and as of right now, I have no way of connecting the two. I would like to just upgrade my video card to one with mini display. I have heard that the converters are either unreliable or don't work at all.
I am contemplating an upgrade from my 2.2 / 4G MBP with 128M VRAM, as i find that it often chokes on simpliest HD movie files created with a DSLR (weekish video), regardless whether I use it with or without the 30 inch Cinema display. So, I am curious how the new Air will run an external monitor, and whether it has enough juice to at least display the HD movies shot with a DSLR without dropped frames/jerkiness. (I guess I am asking two questions in one).
My Cinema, which I just got this week is connected to my Macbook. So = Is the Cinema off when it will show the white light or when it's dark with no lights at all? I kinda think its when the screen is black without the lighting because of the pulsing light on the macbook, but just wanted to make sure, 'cause I'm a "green"-guy!
Alright, so I've previously made a thread about deciding to get the 2.66 Quad Core Mac Pro. And I'm probably going to purchase one. Just one more thing. What is the best webcam out there that I can use for my 20" Cinema Display? I know that the new Microsoft Webcam can do 720p now, which is really nice, but I was wondering if there was a good webcam that is Mac compatible?
could I play ps3 in HD with this thing on a Macbook Pro 13", if I buy that switch and a MiniDisplay Port to DVI-D adapter? would it work? and, could I play ps3 also on the Apple LED Cinema Display? That would be pretty cool cause right now I have a display which supports HDMI, but i wanna buy the LED cinema display and plug in my MacBook Pro to it. It just has one minidisplay port connector, so is there the possibility to connect my PS3 to the MBP and then play PS3 in HD (via that switch) on the Led cinema display? i would be really happy if you could answer my question - really!
Do you think there will be a new Cinema Display?I wanted to buy a new Cinema Display together with my MacPro2009, but that week the iMac 27" was released.So now I am waiting/hoping since October for a new Cinema Display having a 27" size.Do you think such a display will be announced together with the MacPro2010, or do you think they keep the 24" size?
This is sad I don't know this, but I've only used Macs for a year and have only used a Macbook. This weekend I bought a cinema display to go with it. I plugged in the DVI cable, but was expecting there would also be a cable from the display into the wall socket? The display has four cables coming out of it, the DVI, USB, firewire and another. I clicked the display's power button, but only get a black screen.
