I'm trying to intergate my companies AD kerberose with the services hosted on a Lion Server in a golden triangle setup. Here's what I've tried so far.
1. Bind to AD host.
2. sudo dsconfigad -enablesso
3. Make a Opendirectory Master
4. sudo kinit list, all listed services should point to AD KDC.
[code]....
Info:
Xserve, Mac OS X (10.7.3)
There is a possibility that there is something amiss with my external hard drive. I have ejected the hard drive and read in a thread that there is a way to disable TM's continuous "local Snapshots" Backup with a command typed in Terminal. The reasoning is that TM uses a lot of CPU's? and things can become a bit sluggish. If I turn TM to "OFF", doesn't this stop the hourly snapshots on the INTERNAL hard drive?
Info:
Mac OS X (10.7)
I have a server in our DMZ that connects to Active Directory LDAP server (non-ssl over 389) but no objects actually show up in the directory editor. I get a green light in my Network Account Server, but queries against LDAP return no results. My end goal is to be able to dictate to Profile Manager what LDAP groups are allowed to enroll devices. I tested on our internal network on a test server and get the same results. Anyone have any luck connecting a Lion Server to LDAP and actually being able to view and utilize users and groups?
Info:
Mac mini, Mac OS X (10.7.3), Server
I just transferred a group of users from the Local directory to the LDAP directory. There directories are in place and haven't changed, and neither has the size of the email folders in the Library->Server->Mail->Data folder. But now, there are no messages in the directories, including the Inbox. It's empty except for a single message that says "no subject" and has no content.
Info:
Macbook Pro, Mac OS X (10.7.2)
I'm getting ready to migrate our company server to a new server box. I'm doing a complete clean install, and migrating specific information over (we had some corruptions from the initial installation Lion Server). All our users are in LDAP, not the Local directory, and I can't seem to figure out (and don't have the ability to test) if using the Ser Admin app's Archive feature of Open Directory, will include all LDAP information. My understanding is that if I create an archive and restore to it, then all of my users and there information will be put back like nothing happen, but can't get any clarification on it.
Info:
Macbook Pro, Mac OS X (10.7.2)
I am teaching myself UNIX and messing around with the terminal and noticed when the book I am using stated you can us
ls | spell
to pipe the cpommands and spell check the list tht the ls command gets yet when I try to use the spell command it says it is not recognized and when I try and pull up the man page for it says it does not exist....any reason why it is not working?
Info:
MacBook Pro, Mac OS X (10.6.6)
When using finder and browsing through folders, it will only show me a list of recent folders. I use Lion. If I want to see all the folders or open up a less recent folder, I have to click "show all" at the top right hand corner. It gets tedious when I'm dragging and dropping files to different folders when I have to constantly click "show all" just to see the folders I want. Is there a way to override this function through the terminal? Is there a command I can use?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
Someone gave me a terminal command that allowed my OS X Admin user permission to make an application alias without having to enter my user password. I've since forgotten the command and wish to use it for a new admin user since my old admin has gremlins on a number of apps but new users are not troubled in same way. I can't beleive Apple would default to requiring a password to make/edit an alias but there you go the distrurbing trend towards their total control of my desktop advances… not to mention User SysPrefs leaking over from another user for keyboard shortcuts and sounds?
Info:
MacBook Pro, Mac OS X (10.7.3), 10.7.4 actually Wacom 6x11
I am runnning an office network which is connected to each other and the internet through a Linksys 4-Port Wireless Router which is already DHCP-enabled.
Would it be better to disable the Linksys DHCP and enable DHCP through Server Admin DHCP?
If I use Linksys DHCP how do I setup the DNS and LDAP info listed in Server Admin's DHCP settinegs?
I'm trying to connect my Macbook pro to our Exchange Server 2003 via Entourage. Entourage is asking me for the "LDAP" information, and cannot complete setup without it. But our server doesn't use LDAP configuration.
View 2 Replies View RelatedI have one client that my server "serves". I just replaced the hard drive and installed 10.5 on it. (So, my server is at 10.4 but the client is at 10.5). I'm trying to get so I can log in. I figured out how to get the client to see the LDAP (or Open Directory). The machine is now "managed". I can tell because the log in screen has my own message on it. When I type in my user name and password, it finds it but then it says that there has been an error. So, its almost working but not quite. Can a 10.5 client work from a 10.4 Open Directory server?
View 5 Replies View RelatedI've a 10.6 Server. On it, lots of services are enabled such as Address Book Server. I've a copier enable to connect to an LDAP server to have access to mail, fax numbers and more of users/clients. I would like to connect this copier to a user's Address Book. But, user's address book is on the server, and it's a CardDAV address book. Is there a way to have access to this address book trough LDAP?
View 1 Replies View RelatedHow do I change the ports Open Directory runs on? Is there an LDAP config file somewhere? I need to change port 636 to something else
View 1 Replies View RelatedI'm running Symantec Backup Agent on our mac osx server. I start the agent in the terminal (./agent.be). It returns a notification that it started the service, however, it doesn't return to the prompt. Closing the terminal gives a warning that the process will be closed if the terminal is closed. Closing it does kill the process. Ctrl+c to return to the prompt also kills the process. So it's as if once the process is started in the terminal, nothing can be altered.
I am not much of a mac guy so please forgive me if this is a stupid question.
Anyone have any advice on how to handle this so the process is ALWAYS running?
Can anyone tell me what this "*" means beside mathematica and mathkernel? I'm using snow leopard.
View 5 Replies View RelatedSimple request and for some reason my google-fu is failing me. How do I change the volume (drive not audio) in the Terminal app in OS X. I am using SL.
View 24 Replies View RelatedIs there a command to clear the terminal screen that works like 'cls' on Windows? I know about 'clear', but clear just moves the prompt on the top of the screen, leaving the previous output visible if I scroll up.
A friend suggested 'clear_console' (I think he's on debian) but I can't find it on OS X or MacPorts.
I want to build a redboot kernel in a wireless router, the command required from my newly acquired knowledge is insmod and modprobe.
However from the mac 10.5.8 terminal it says that the command is not found. I have installed gcc , sdk compiler support and enabled the super user as well.
Seems like a simple thing to do, yet I've searched and not found an answer.
Automator doesn't seem to have a terminal function...?
Does anyone know?
I want to run some terminal commands fairly often... yet I don't want to have to type them. I just switched from windows, so I need some help as to how to do this.
In windows I would've just used a batch file to run command prompt commands. I need something that will let me just run it and it will automatically run the commands.
I ran this command in terminal to change my screen shot to jpg format. Now my screenshot doesn't work. Any idea how to fix or reverse this?
View 2 Replies View RelatedIs there a command for terminal to get the current application?
View 4 Replies View Relatedcan someone please tell me how to fill out this command in terminal?
./compressIt /to/image/file.iso
Last login: Tue Jun 30 15:38:02 on console
-bash: 2-18-09: command not found
I can use the Control>C command to quit that and return to normal. But it's a waste of time and I can't seem to figure it out. A Genius Bar Genius said to Archive and Install, but I don't think it's necessary. I just want to know how I can find whatever it is that's screwing it up.
I can't seem to run a sudo command in the OS X terminal. Every time I run a sudo command, I get no response, as if the command is not run at all. My sudo appears to be broken somehow. I've got a problem with mounting an NTFS drive that is dirty. I have a command I am trying to run using the "sudo" command, but it is not working.
Code: sudo /usr/local/bin/ntfs-3g /dev/disk0s3 /Volumes/WIN XP -o force
After the sudo, I am prompted for my password, but after that the only response I get is another prompt, as if the command was totally ignored. I have tried many different commands after the sudo, and cannot get a response from anything. I even tried "sudo tcsh", which should open up a new shell, but nothing. "sudo ls" also shows nothing, just another prompt.
What is the best way to run a terminal command when logging in? And by �best� I mean �fastest.� I�ve been encapsulating my commands in an Applescript, but it�s terribly slow to load, and I�m hoping there�s some UNIX back-end I can use to speed things up.
Specifically, I want to run a shell script that I wrote. It decrypts some folders inside my Home directory so I can use them (this part works seamlessly, I just need it to auto-run itself).
1. Lion's (10.7.3) user interface becomes nonresponsive/'freezes': trackpad cursor moves, keyboard can be used for typing, BUT gestures stop working and "Dock" is not responding (it is hidden automatically).
2. Tere are frequent "nfs server localhost:/5pBJvp-jULTJrbfF3Hpvc5: not responding nfs server localhost:/5pBJvp-jULTJrbfF3Hpvc5: is alive again" error messages in Terminal while I am running 'find' command.
These error messages seem to be correlated witth the user interface 'freezes'.
Info:
MacBook Pro, Mac OS X (10.7.3)
You'd think this was all pretty basic. It probably is.
I'm trying to open/edit '/usr/local/php5/lib/php.ini' with TextWrangler through Terminal. The TextWrangler part isn't an absolute requirement. The directory exists and I'm assuming the file does as well. (No 404-esq errors during my fumblings and it was a standard installation of PHP5)
Also, is there any way to browse through the above directory using the Finder's GUI? That would be nice.
I need to erase a disk I bought with NO formatting. I shouldn't have initialized it when I connected it, and now I need to erase it but do NOT want to format it.
I've been trying to use diskutil eraseDisk %noformat% /dev/disk1
Like the diskutil eraseDisk instructions tell me to, but it won't take.
I used to know a command that would show all of the ip address and the name of the devices on your network. I have not use the command in a while and I forgot it.
View 11 Replies View Related