I am selling my iMac 27" and I want to deleted all of my files except for the IOS Lion. how to do this and get the hard drive back to a factory setting so that I can sell the computer and not have to worry about content being on the hard drive. I have a external hard drive backup.Â
Info:
MacBook, Mac OS X (10.7)
Here is the back ground information of this situation. I have a IMAC 21 inch 500GB Hard drive 4 GB RAM, which is up to date with OS X Ver 10.7.3. So my wife loves to stream her favorite USA TV shows via the Internet, considering we are stationed overseas. She pulled me away from the NBA playoffs because she kept getting this error of start up disk full delete files (or something to that effect.) So last week, I deleted about 40GB of old shows that we downloaded and various other files and pictures. Not even four days later the Hard drive is full again, and I think it is from my wife's streaming habit. I went to "About This IMAC", to find out where the memory was being used from and its 377 GB used in a "OTHER", and the rest being utilized from APPS, MUSIC, PICTURES, etc. So next I cleared the history and deleted the cache files and reset safari on both our log in profiles, then logged out and restarted the computer, which did not minimize the Hard drive memory being occupied. Where are those streaming files getting saved specifically, for maybe a manual delete?Â
Info:
iMac, Mac OS X (10.7.3)
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedOur 500 hard drive is almost full, 256 of it is labled as other, how do access these files to deleate them?
Info:
iMac, Mac OS X (10.6)
I have an external hard drive that I use as my "back-up" of old jobs. I then burn my jobs to a dvd and then delete the files I burned. Is it possible to just delete the files from the external hd and not my computer?
View 4 Replies View RelatedI had just purchased a Lacie 500GB xternal drive for my G5, I also have another xternal drive hooked up which is a Western Digital. I copied everything , music video files ect... onto the Lacie drive to clean up the WD drive, now when I went to clean up the new Lacie drive the files I deleted are gone but it is not freeing up any space. I went to disk utilities and re-formatted but it wiped it clean, is there such a way to delete a few files here and there and gain the space they were taking up without going this route?
View 6 Replies View RelatedBasically I just got myself the latest MacBook as an upgrade from an old laptop. With my old laptop I had no problems what so ever when using my external hard drive. To delete any files I didn't want I would just right click and press the delete option. However, when connected to my new Mac, there is no such option when right clicking on a file. I've tried dragging the file to a recycling bin but I get a message from the finder saying this file can't be deleted. I've tried moving the file out of my hard drive which worked and then deleting it which was fine but the file remained in the external hard drive as I'd only created a copy. I can't figure out how to delete files I don't want. Deleting everything on the hard drive is out of the question.
View 3 Replies View RelatedI've been backing up my MacBook Pro on an external portable hard drive. I need to delete some but not all the files from that portable hard drive permanently. When I highlight them and click to move them to Trash I get a message telling me this cannot be done because they are Read Only files? How do I go about it. I am required by work to delete them off this hard drive. Do I have to reformat the hard drive? If so how do I go about it?
Info:
MacBook Pro
I'm trying to clear up space on my external hard drive (Western Digital - My Passport), but it won't let me delete anything. In file, 'move to trash' is not highlighted, and when I click on get info, under 'sharing and permissions', it says 'you can only read'.Â
Info:
MacBook Pro, Mac OS X (10.7)
i am trying to delete my entire harddrive but i can't do it. the reason for doing this is to install Yosemite version on my imac because right now i am getting a S.M.A.R.T. error and also my optical DVD drive is not working so I can't use my apple cds to restore my computer
Info:
iMac, Mac OS X (10.6.8)
I have about 30gb pictures stored on a flash drive, what is the best and quickest way to delete them?
View 2 Replies View Relatedmy 4 month old IMac 1TB hard drive is full of log files
1. Why is the Mac storing so many?
2. How can clear the files
3. How do I prevent the machine from doing it
Info:
iMac (27-inch Mid 2011), Hard drive
I need help transferring my Itunes to my external hard drive.
Info:
iMac (20-inch Early 2008), iOS 5.0.1
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies View RelatedI have an iMac (Mid2011). I have too many files on my hard disc and am trying to move some over to an Elements Hard drive I have connected but when I try and move them over nothing happens and it just gives a can't do sign.
View 3 Replies View RelatedMy mac is starting to become slower because its almost reached it 500GB limit. How can I transfer all of the files (*Excluding Applications) from my mac onto the hardrive, but removing them off my mac in the process so Im effectivly wiping my mac, and accessing all of the files off the external hardrive.
Info:
Mac OS X 10.5.8, Mac OS X (10.5.8)
My hard drive failed on my iMac (Intel), Apple Store replaced the hard drive, brought it home, hooked up the Time Machine, selected a backup date, restore. It showed the content loading for 4 hours. Once complete, the iMac still looks nothing like the old. Open the Macintosh HD and Info shows that the 230 GB transferred, but I can't find the folders anywhere. When actually opening the Macintosh HD, its only new folders and the new setup. Where do I find the restored content?
Info:
iMac, Mac OS X (10.7.2), Time Machine restore
I own a 2011 iMac OSX 10.9.4 that has a 250GB ssd and a 1TB hard drive built into it. I take a lot of photos, so usually I copy all of them into the 1TB hard drive for storage. A few days ago I wanted to look through some old pictures and found that all my files from after mid 2012 have completely vanished. There is no trace of any updates to this hard drive after mid 2012. I know I did not misplace these photos because I frequently place new folders in the hard drive and view old memories. When I went to place more folders in, I noticed the amount of folders decreased drastically.Â
I've tried searching for the photos in the search bar and scrolling through "All My Files", and they are just not there. I've also tried revealing any hidden folders through Terminal. There are no folders with a modification date past mid 2012. The thing is, everything in the SSD hard drive appears normal and updated, only the 1TB hard drive has reverted back to a 2012 state. Is there any way to retrieve the files? Months of work and photos are gone. How could this have happened? And how can I prevent this from happening in the future?
Info:
iMac, OS X Mavericks (10.9.4)
I tried to erase my backup files from my external hard drive. Once in the trash, I cannot delete the backup.backup file.
Info:Mac OS X (10.6.7)
i have both external hardrive open but i tried copy and paste, click, drag, and unclick. nothing works.
Info:
iMac
i am a new user and cannot drop and drag my files from my mac to my external hard drive
View 3 Replies View RelatedI have all of a sudden started getting an error code -36 from an CF card copying to my mac?
Info:
iCloud
I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.Â
The same is working fine with USB flash memory.
Info:
iMac, Mac OS X (10.6.8), The same is working fine with USB
My 500gb iMac (purchased April 2010) is about at capacity. 350gb of space is taken up by home movies (.mov) in iMovie. I bought an external hard drive and have moved about 200gb over to that drive.Â
After transfer, I deleted the original Events off iMovie and emptied the trash. I checked in both iMovie and in Finder and no longer see those files present on the Mac. Â
I thought this was going smooth and everything worked perfectly, but….when i went to check how much storage space i created on the Mac, the amount of available space barely budged (i moved 200gb of data to the new drive and i created about 30gb of space on the Mac).Â
Are these "deleted" files hidden somewhere and I need to go delete from somewhere else? How do I make sure I get back the storage that i need?Â
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
I have tried moving them to the trash, as well as using the move to trash button. They seam to go to the trash can but when I delete the trash they are still in the file. I am trying to clear out some old files so that I can have room on my start up disk. My Disk is full and it is making it hard for me to open more then one file. I am getting an external hard drive soon but don't want these files on it.
Info:
iMac
I have only a couple of gigs of space left on my hard drive of my otherwise perfectly fine imac. Looking on the drive I see two folders which combined take up around 80 gigs of space. One is titled "systems copy" and is dated from 5 years ago, and the other is called "Applications copy" and is similarly dated. These could be from when the machine had major repairs back in 2007, but as I didn't create them I'm not sure. I don't see these on my newer macbook drive, so I'm wondering whether they are necessary.
Info:imac dual core 20, Mac OS X (10.4.7)
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
I've got 3 large external hard-drives--WD, Seagate, iOmega--connected to my iMac to contain a sprawling music collection. I'm working on deduping, etc., but each attempt to search a single hard drive results in my search being shunted to "All My Files." I'll watch the Finder each time I enter a search term in the window of one drive, and upon entering a syllable in a drive's Search box, the area is expanded to include every folder in at least 4 different hard drives (inclding my iMac's).
I'm not sure if the problem is overly large drives (500 GB to 1.5 TB) or some default setting, probably associated with Spotlight, that interprets each and every search as, basically, "everything Spotlight can conceivably see." Needless to say, my cleaning project is going slow--primarily because I can't work "one room at a time."
Info:iMac, Mac OS X (10.7.2), 2.5 GHz Intel Core i5s).
I
I have been using a Seagate 1TB external hard drive (Mac OS Extended Format) to archive some of my videos for the past 6 months. I have been using it with no problems whatsoever until now. Today I fired it up and tried to delete a few files from the drive and nothing happens.
I drag the files to the trash and hit "Secure Empty Trash" from the finder menu. I hear the "crinkle" sound of the trash emptying, but when I look in the trash the files are still there...it refuses to delete the files.
