Intel Mac :: The Volume On 10.7.3 Isn't Working
Mar 29, 2012The volume on 10.7.3 isn't working? This is what pops up.
Info:
iMac, Mac OS X (10.7.3)
The volume on 10.7.3 isn't working? This is what pops up.
Info:
iMac, Mac OS X (10.7.3)
The volume controls are not working correctly. Using the volume key on the keyboard, the volume overlays comes up and goes up/down, however there is no change in volume.
Also when i cick on the volume icon in the bar at the top i can move the slider up/down but no change in volume. The only way I can change the volume is to go into system preferences.Â
Restarting the iMac temporarily resolves the problem, but it's not usually long before it acts up again.
Info:
iMac, Mac OS X (10.6.8)
I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software.
Info:iMac, Mac OS X (10.5.8)
After the cat spilled a glass of water on my wireless keyboard I had to get a new one. I asked the folks at my local Apple store both over the phone and in person if the 10-key keyboard (non-wireless) they were going to sell me was compatible with Mac OS X version 10.5.8 (I think I'm Leopard) and they assured me it was. When I hit the volume keys, it initially used the assigned function of the F10, F11, and F12 keys (manipulated the windows and dashboard). I removed those key assignments through system preferences but now the volume keys do absolutely nothing. I tried looking for volume controls through the assignments but couldn't even find them to assign the F10, F11 and F12 keys to them.Â
Info:
iMac, Mac OS X (10.5.8)
Immediately press and hold the Option key. After a few seconds, the Startup Manager should appear. The Startup Manager scans for available available volumes. <- This doesn't work at all. I'm using apple wireless keyboard.
Info:
iMac, Mac OS X (10.7.4)
About every other time I start up my Mac I get a status bar on startupt (before the login). It takes a bit longer than normal to start up but eventually it does. However, on these occasions that my Mac acts like this I also encounter two (at least) other issues. The first is the volume control has a crossed-out symbol, and hence there is no sound whatsoever—internal speakers or external. Further, and perhaps more troubling, is Spotlight does not work; I attempt to search but I only have the option for web results.Â
I also notice some general slow down and it sounds like the Mac is always working on something (fans aren't running full blast though). This led me to open Activity Moniter, which revealed and absurd amount of Wired memory (about 6 GB out of 8). Â
What is going on here? I've tried resetting my PRAM and booting in Safe mode; however, I am having the embaressing problem of not actually accomplishing those tasks (I think). I hold down the correct keys but my bluetooth keyboard doesn't seem to be responsive early enough for the keystrokes to register.Â
Info:
iMac, Mac OS X (10.7.3)
Im trying to use the keyboard for my volume but it isn't working.
Info:MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
So everything's been fine on this Mac Book. Just about an hour ago, my volume keys stopped working. I tried re-setting the PRAM. That didn't work. Imade sure voice overs and such were disabled. Still nothing.
I just installed Windows Vista on my MacBook pro, and first time everything seemed to work fine. But i couldn't open the Bootcamp application and the volume wouldn't work no matter what.
I tried putting my mac OS X install DVD back in and 'repaired', after this the Bootcamp application works, but i still can't get sound? It says no output is installed or something like that.
My volume buttons aren't working, the icons appear on screen but don't control the volume at all.
The only way I can control the volume is by using the output volume scroller in system preferences. How can I get the buttons to control volume again?
Info:
MacBook Pro 2.93 Ghz, Mac OS X (10.5.6)
My volume buttons aren't working, the icons appear on screen but don't control the volume at all. The only way I can control the volume is by using the output volume scroller in system preferences. How can I get the buttons to control volume again?
Info:
MacBook Pro 2.93 Ghz, Mac OS X (10.5.6)
Using Lion, latest and fully updated. At some point in the past week or so the volume control stopped having an effect. Using either the keyboard function keys or the item in the task bar, the graphics look good and the blocks/slider move around just fine, but there is no effect whatsoever on sound output. I can control the volume in whatever app I'm using, whether it's a Web app or local app with its own volume control. But the system volume controls no longer have an effect. This is true whether or not I'm using the display output or headphones.
Info:
Mac Pro (Mid 2010), Mac OS X (10.7.2), 8-core Xeon, 16G ECC RAM, 0+1 RAID
My output volume on my MacBook Pro is not working. When I go to "Settings", then "Sounds", then "Output", I can not slide the volume bar at all, or change it in the menu bar?
Info:
MacBook Pro
sometime this week the volume control on my pro keyboard stopped working. you can hear the "pip" noise when you hit the louder / softer buttons on the keyboard but the level doesn't change. i am still on good terms with my mute control, however.i have to resort to using the sound control in system preferences instead to increase or decrease the volume (sigh!)
i am running 10.2.8 and at about the same time as this problem occurred, I'd upgraded quicktime and think maybe it's the culprit, but before i waste a few hours playing sherlock holmes.
.
When I adjust my volume controls on my keyboard, F10 thru F12, to listen to audio out loud, I get this picture (attached). However, if I am listening to headphones, the volume still works.
I tried shutting down and restarting, and I've been thru my preferences. The drop down volume control on the top right of the screen is set to as loud as it can go.
I just got the new 15" Macbook Pro a few days ago. My first Mac
Anyway, when I plugged my external speakers into the headphone jack of the MBP, the volume control (both in the Apple bar thing on the top of the screen and the F10/F11 buttons) switched so it would control the external speakers, as it should. The problem started when I unplugged the speakers and went to use the internal speakers again.
And the volume control doesn't work. If I push F11 for volume up, the little screen appears and it looks like the volume is going up, complete with the little water drop sounds, but it doesn't actually adjust the volume. If I plug the speakers back in, it will control the speakers properly, but I can't figure out how to make it control the internal speakers again
I'm sure that if I restarted it would fix itself (probably), but that's a real pain as I am frequently plugging in and unplugging speakers to my laptop.
My volume keys on my MacBook have stopped working. All otherkeys work fine. Tried re-setting the PRAM and nothing. Made sure the voiceovers and such were disabled as well.
Relevant hardware: new Mac Pro, aluminum wired full keyboard, external speakers (Line Out). Every now and then, the volume up & down keys (F11 & F12) stop working. (Usually seems to happen upon waking from sleep, but not certain of pattern yet.) The volume keys still make the translucent volume graphic pop up, and they still make that pop-up's slider move up and down, and they make that feedback/confirmation "blip" sound grow louder or softer. But, this has no effect on the actual volume (except if I move it all the way down to Mute; that works).
I can only change volume with the mouse -- in the menu bar or in System Preferences. The keyboard volume buttons have no effect on those sliders, when this problem arises. All the other F-keys continue to work properly, so it's not a general keyboard or F-key issue. Only volume up/down. If I restart the computer, the problem is fixed. And I just noticed that if I go into System Preferences and change the Output to "Built-In" and then back to "Line Out," that fixed the problem too. At least, for now.
I have a MacBook Air, and the sound is not working. The sound bar is full but there is a stop sign like the one when you completely turn off the sound. And I cannot control the sound bar, It is stuck like that.
View 6 Replies View RelatedMy up-volume and down-volume keys aren't working. I can only control the vol from the sound in system preferences.
Info:
MacBook Pro
The volume and other function keys aren't working as they used to. The brightness key doesn't do anything and the volume key isn't working either. I've tried to fix it on system preferences but it didn't work. They're not set to be used like normal function keys. I don't know what is happening they were working fine.
View 1 Replies View RelatedUp until recently, F1 - F5 have been Brightness and Volume controls, as they have been since I got the thing. I go to use the Volume, and it doesn't work. I then try the Brightness, and it doesn't work. F6 - F12 all work just fine, which leads me to believe that iBook had a brain fart.
My volume balance has always altered itself. Balancing itself out of one speaker left or right as it so chooses. I know it's smart, but now it's just screwing with me. Settings go and change on their own, dock icons have switched, but this one has stumped me. How do I get those hardware function keys back to doing what they're there to do?
Also, I tried it with an App called Rowmote, that lets you control your Mac from your iPhone, with Apple Remote-like control, and the volume won't change using that either. Another symptom is that sometimes it makes clicking sounds, as if it were changing slowly and glitchy (which it did click sometimes anyhow) when using the Volume slider in the menu bar.
No, the options in System Preferences is not checked to use them as FN. Any ideas?
I just installed Windows 7 on my Windows partition and everything works fine (video, audio, etc.) except when I try to control the sound from my keyboard with F10, F11 and F12....nothing happens.
View 1 Replies View RelatedOn my new 15inch mbp the volume keys have suddenly stopped working. I checked in system preferences that the use F1 keys as standard is not selected. When I plugged in speakers or headphones the volume keys work as normal. But with just internal the little picture on screen comes up so the keys work but it doesn't affect the volume?
View 5 Replies View RelatedI have a 2011 (?) macbook air and ever since my trip to the genius bar for a battery issue my function keys don't work after I wake it up (just opening screen). May also be related to last firmware update? Â
I have checked the function key mapping in settings and they are normal. The volume key launches Expose and the brightness keys (and others) don't do anything. A reboot helps but only untill the first time I put it to sleep (close/open lid).Â
Info:
MacBook Air, Mac OS X (10.7.3)
The volume quit working on my computers speakers. I try to hit the up volume and a greyed out speaker appears showing volume bar all the way up with a circle below it with a line through it?
Info:
MacBook Pro, Mac OS X (10.5.8)
My volume randomly stopped working.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
Really stumped by this. Recently (I think it was after a MacOS update but I'm not sure) my brightness and volume keys stopped working on my 2011 13" MacBook Air running MacOS 10.9.4. The F keys still work i.e. if I press Fn-F10, I get the expected effect from pressing F10, but if I just press F10, volume remains unchanged (should get muted). Mission Control, Launchpad, and media keys (rewind, play/pause, ff) all work.Â
Using Karabiner, I checked to make sure the keys generate correct events. They do. Pressing the brightness keys generates 0x3 and 0x2. Pressing the volume keys generates 0x7, 0x1, and 0x0, which are the expected key codes defined in ev_keymap.h, the header file for HID. I can also adjust volume and brightness using the sliders in the appropriate section of "System Preferences."Â
So volume and brightness itself can be changed. They keyboard keys themselves work and produce correct keycodes. But whatever operating system feature (HID?) that is supposed to read the keyboard input and translate it into commands to the display and sound drivers doesn't work.Â
I've tried all the obvious stuff (restart, safe mode, toggle the Function key option in System Preferences->Keyboard). I've reset SMC and PRAM. Nothing has worked so far. Â
The only other thing I can think of is that a while back (before this problem started occuring) I got annoyed by the power button in the top-right corner of the keyboard, which I would occasionally hit accidentally. I searched for a way to disable it, and I think I found something -- now it only does something if it's held for 2 seconds. A quick up-down strike does not do anything. Perhaps in tweaking some setting to achieve this behavior (I don't remember what I did), I screwed up something with the brightness/volume keys, but this screw up only became evident later.Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
I recently ran an update for my Macbook Pro. After the update, the volume keyboard shortcut does not work. I have the setting for the function keys to work like normal function keys so I have to press the fn key to change the volume. This does not work and changing the setting does not work. I cannot add a shortcut either. Whenever I push the shortcut, I get a grayed out screen with a symbol showing that I cannot change the volume. I can still make changes by clicking on the volume symbol at the top of my screen but I really need the shortcut back.
View 1 Replies View RelatedIve recently had to repair my startup disc volume/reinstall Tiger and now my iPod doesnt store songs after I sync it. All of my music is in iTunes and everything else seems to be working however once I disconnect my iPod NOTHING is there.
Ive been looking through all the previous discussions but cant seem to fix this on my own. And Im not even sure if I should be posting this question on here or in another forum...because Ive also noticed that there are no pictures in iPhoto .when I did the repair...it asked me if I wanted to save a copy of the previous system which I did.
Info:
PowerBook, Mac OS X (10.4.11)