I just installed Windows Vista on my MacBook pro, and first time everything seemed to work fine. But i couldn't open the Bootcamp application and the volume wouldn't work no matter what.
I tried putting my mac OS X install DVD back in and 'repaired', after this the Bootcamp application works, but i still can't get sound? It says no output is installed or something like that.
I have XP running beautifully on a 150 GB Raptor (via bootcamp). I'm thinking of adding Vista, but I'd like to avoid formatting the drive and creating two partitions for XP and Vista.
Can I slice off some of the 150 GB for Vista leaving XP intact?
I have successfully striped two SSDs in Vista Business-64 on my MacPro1,1. I have used Vista's data carrier administration program for this. As expected the array isn't recognized in OS X. So I cannot just dump a Winclone image on the array. That would have been much to nice!
My next strategy was a total backup with Vista's own backup program on another HDD. That went without a hitch. I then hoped that booting the Vista install DVD with the backup drive present and the RAID0 array would allow me to restore the backup on the RAID array. Unfortunately Vista will not recognize the array running of the install DVD. Loading AHCI or IMSM drivers will not change this situation.
It appears that you have to make the dynamic data carrier active if you want to install Vista on it. Unfortunately the data carrier admin program will not let me do this. I would do it in DISKPART if I knew it was possible and how to do it.
So the question is does anybody know how to install Vista Business to a dynamic data carrier? If I cannot figure out this soft RAID0 I will ave to buy a RAID controller which I thought I might avoid at this point.
As the title states, is anyone having trouble using headphones using windows vista under boot camp? I've tried 3 different pairs and none seem to work....the sound menu states that headphones are plugged in and working however all sounds are still coming out of the speakers, which are also not loud even if turned up to the max.
View 3 Replies View RelatedIm trying to use the keyboard for my volume but it isn't working.
Info:MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
My volume buttons aren't working, the icons appear on screen but don't control the volume at all.
The only way I can control the volume is by using the output volume scroller in system preferences. How can I get the buttons to control volume again?
Info:
MacBook Pro 2.93 Ghz, Mac OS X (10.5.6)
My volume buttons aren't working, the icons appear on screen but don't control the volume at all. The only way I can control the volume is by using the output volume scroller in system preferences. How can I get the buttons to control volume again?
Info:
MacBook Pro 2.93 Ghz, Mac OS X (10.5.6)
My output volume on my MacBook Pro is not working. When I go to "Settings", then "Sounds", then "Output", I can not slide the volume bar at all, or change it in the menu bar?
Info:
MacBook Pro
When I adjust my volume controls on my keyboard, F10 thru F12, to listen to audio out loud, I get this picture (attached). However, if I am listening to headphones, the volume still works.
I tried shutting down and restarting, and I've been thru my preferences. The drop down volume control on the top right of the screen is set to as loud as it can go.
I just got the new 15" Macbook Pro a few days ago. My first Mac
Anyway, when I plugged my external speakers into the headphone jack of the MBP, the volume control (both in the Apple bar thing on the top of the screen and the F10/F11 buttons) switched so it would control the external speakers, as it should. The problem started when I unplugged the speakers and went to use the internal speakers again.
And the volume control doesn't work. If I push F11 for volume up, the little screen appears and it looks like the volume is going up, complete with the little water drop sounds, but it doesn't actually adjust the volume. If I plug the speakers back in, it will control the speakers properly, but I can't figure out how to make it control the internal speakers again
I'm sure that if I restarted it would fix itself (probably), but that's a real pain as I am frequently plugging in and unplugging speakers to my laptop.
My volume keys on my MacBook have stopped working. All otherkeys work fine. Tried re-setting the PRAM and nothing. Made sure the voiceovers and such were disabled as well.
My up-volume and down-volume keys aren't working. I can only control the vol from the sound in system preferences.
Info:
MacBook Pro
The volume and other function keys aren't working as they used to. The brightness key doesn't do anything and the volume key isn't working either. I've tried to fix it on system preferences but it didn't work. They're not set to be used like normal function keys. I don't know what is happening they were working fine.
View 1 Replies View RelatedOn my new 15inch mbp the volume keys have suddenly stopped working. I checked in system preferences that the use F1 keys as standard is not selected. When I plugged in speakers or headphones the volume keys work as normal. But with just internal the little picture on screen comes up so the keys work but it doesn't affect the volume?
View 5 Replies View RelatedI have a 2011 (?) macbook air and ever since my trip to the genius bar for a battery issue my function keys don't work after I wake it up (just opening screen). May also be related to last firmware update? Â
I have checked the function key mapping in settings and they are normal. The volume key launches Expose and the brightness keys (and others) don't do anything. A reboot helps but only untill the first time I put it to sleep (close/open lid).Â
Info:
MacBook Air, Mac OS X (10.7.3)
The volume quit working on my computers speakers. I try to hit the up volume and a greyed out speaker appears showing volume bar all the way up with a circle below it with a line through it?
Info:
MacBook Pro, Mac OS X (10.5.8)
Really stumped by this. Recently (I think it was after a MacOS update but I'm not sure) my brightness and volume keys stopped working on my 2011 13" MacBook Air running MacOS 10.9.4. The F keys still work i.e. if I press Fn-F10, I get the expected effect from pressing F10, but if I just press F10, volume remains unchanged (should get muted). Mission Control, Launchpad, and media keys (rewind, play/pause, ff) all work.Â
Using Karabiner, I checked to make sure the keys generate correct events. They do. Pressing the brightness keys generates 0x3 and 0x2. Pressing the volume keys generates 0x7, 0x1, and 0x0, which are the expected key codes defined in ev_keymap.h, the header file for HID. I can also adjust volume and brightness using the sliders in the appropriate section of "System Preferences."Â
So volume and brightness itself can be changed. They keyboard keys themselves work and produce correct keycodes. But whatever operating system feature (HID?) that is supposed to read the keyboard input and translate it into commands to the display and sound drivers doesn't work.Â
I've tried all the obvious stuff (restart, safe mode, toggle the Function key option in System Preferences->Keyboard). I've reset SMC and PRAM. Nothing has worked so far. Â
The only other thing I can think of is that a while back (before this problem started occuring) I got annoyed by the power button in the top-right corner of the keyboard, which I would occasionally hit accidentally. I searched for a way to disable it, and I think I found something -- now it only does something if it's held for 2 seconds. A quick up-down strike does not do anything. Perhaps in tweaking some setting to achieve this behavior (I don't remember what I did), I screwed up something with the brightness/volume keys, but this screw up only became evident later.Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
I recently ran an update for my Macbook Pro. After the update, the volume keyboard shortcut does not work. I have the setting for the function keys to work like normal function keys so I have to press the fn key to change the volume. This does not work and changing the setting does not work. I cannot add a shortcut either. Whenever I push the shortcut, I get a grayed out screen with a symbol showing that I cannot change the volume. I can still make changes by clicking on the volume symbol at the top of my screen but I really need the shortcut back.
View 1 Replies View RelatedSpeakers are not muted, according to system profiler, they are connected. Won't let me turn them up or down, even though they are set to the highest setting. Basically the volume control is greyed out.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
i charge my macbook pro at nite and i turn it off but when i wake up in the morning it has no charge....and also the volume isnt working
Info:
MacBook
Pro, Mac OS X (10.6.8)
I have a late 2008 model macbook pro and the resent update to 10.9.3 has made my screen dim, keyboard backlight dim, and volume special functions to stop working?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
switch to OS X over a year ago and ever since that i have had problem with my network connection to my Vista fileserver (no it is not Vistas fault).
OSX finds my Vista computer occasionally, but almost ever when the Vista computer has been turned off over night and the OSX comp have been on over the night!
I have tried smb://IP but that only works for 20min or so, then it drops the connection, when i retry i only get an error message that says that i should control the servername or IP and try again, and if that doesnt work i should contact a sysadmin, that error message is not very usefull!
I have a Dir-655 Router if that has anything to do with this!
I just installed Vista 64bit on my Mac Pro.I don't have Leopard or Mac OS installed at all due to my graphic cards problem.So I installed it successfully and I downloaded the BCUpdateVista64When I click on it, it asks me, "Allow", and I allow it.Then nothing happens.This is a English version of Vista 64bit Ultimate.
I recently tried to login to my windows boot camp (Vista 32bit) and it won't recognize my password which I know is correct. I recently changed the login password on the Mac side. Could this be the cause of the problem?
View 1 Replies View RelatedI have a Dell Inspiron 1545, and Safari has been working perfectly up until this last week when I went away. I left my laptop at home with safari running, and I left the laptop on while I was gone. When I got home and clicked on Safari (the laptop had died, which closed all of my programs), the window pops up but then it freeezes and stops responding. When I click on the window, a smaller window pops up asking me if I would like to close the program or wait for it to respond, and when I select close program, another window pops up saying that the WebKit2WebProcess.exe has stopped working. I have tried starting the computer in safe mode and nothing is working. If I reinstall Safari, I run the risk of losing all of my bookmarks. What should I do?!
Info:
Safari, Windows Vista
I've had Windows Vista Home Premium 64-bit installed on this Mac before, and it had nothing but problems. I couldn't get sound, even though the settings and everything said it was enabled and working, and etc. But, more importantly, games would run bad on it.I got Diablo 2 running (256 color game) on it, but the colors were terribly messed up. I'm wondering if this problem was due to the fact my Windows copy wasn't genuine (it was a copy of Windows that came with my mom's computer), if it was because that version was 64-bit, or if it was from my drivers (because there is a problem with these drivers supporting 256 color on the Mac OS).I've got the AppleIntelGMAX3100 video drivers, and they won't let me run Diablo 2 on my Mac side. On Windows, it'll let me run it, but I'm not sure if they cause the discoloration or not.
View 6 Replies View RelatedThe volume on 10.7.3 isn't working? This is what pops up.
Info:
iMac, Mac OS X (10.7.3)
installed vista on my mac. When I boot into vista, a message saying " boot camp manager has stop working. A problem caused the program to stop working correctly. " the fn keys dont work. So I reinstalled boot camp and everything was fine until the next time I log into vista and same message pops up. Reinstalled again and same thing happens everytime.
View 1 Replies View Relatedmy Apple wireless keyboard works fine in OS X Leopard but when I load up Windows Vista my Keyboard does not work. The mouse wasn't work for awhile either but I managed to pair it and now it works except for the keyboard. I can't get the keyboard to work under Windows Vista Ultimate 64 bit. I've gone into blue tooth settings and added the keyboard, hit properties, installed the drivers but it still won't work. I'm out of options and ready to just purchase a wired keyboard.
View 4 Replies View RelatedI'm trying to share the internet connection on my windows vista partition. Until now it has been fine, but all of a sudden, yesterday, it stopped working. iPhone and mac both show self assigned IPs. I tried resetting and setting up a new ad hoc network and checked settings to make sure internet sharing was enabled, but still the mac and iPhone are not given their own IPs.
View 1 Replies View Related