Hardware :: Won't Work To Connect / Using Time Capsule (Wifi)
Nov 17, 2009
When I live at my brother's house, I connect to my brother's network which gives me wireless internet. Is it possible for my TC to, instead of being plugged in directly to his router with an ethernet cord, pick up his network's wireless internet and output it on it's own network?
In case that question makes no sense, what I want to do is connect to my TC's network (so I have access to the hard drive) but still get my brother's internet connection.
I recently purchased a Time Capsule to use as a wireless hard drive. I connect to the internet both through wifi and ethernet to a educational network that does not allow extra routers, etc, to be added to the network, therefore I can not use the time capsule for this wifi.
I therefore want to connect to my early 2009 MBP17unibody to both the academic internet network for http/pop3/ftp/etc while simultaneously connecting to external hard drive to store data/itunes-library/etc.
I expect this has been asked before but I can't find any threads where it has. If anyone knows it would be highly helpful. I'd prefer to connect to both wirelessly but I could potentially put up with connecting to either or both with ethernet.
Just replaced a 500 gb time capsule with a new dual band 1 tb time capsule (first one died). My iMac, ipods, ps3 and wii all can connect to the network and work great. My wife's HP laptop, which worked fine 3 days ago, isn't connecting well. It picks up the "excellent" signal to connect to the local network made by the time capsule, but can not connect to the bigger internet. In other words, no browsing, email...etc. the signal is "excellent, and all other devices in the house can "see" and use the internet
I am having major issues trying to get my TC to work with an existing wireless network. I am using a Macbook and an iMac, having just upgraded both macs to snow leopard. I connected the TC to a BTVOYAGER wireless router using an ethernet cable, turned on airport and it worked fine for a few hours. Then, suddenly lost internet connection. Other PC's connected just to the BTVOYAGER also lost connection to the internet, although were still connected to the router.
After much troubleshooting, after removing the tc from the equation managed to re-establish internet connection on the windows PCs. However, when connecting the macbook to the btvoyager (not using time capsule at all) the internet connection was lost on all computers. disconnecting the mac and resetting the router brought back the connection.
I am ignoring the time capsule completely at the moment until I can get btvoyager to work again with my macs. I am able to connect to public wifi, so know that the airport on the mavbook is working ok. I have also turned off IPv6 configuration as I am not sure the BTvoyager is compatible with v6.
all other settings on aiport seem to be ok and it will connect to the btvoyager network, just not to the internet. and nothing else will either!
Airport seems to have stopped working on my iBook G4 (it only detects networks intermittently). If I buy a USB WiFi adaptor, will the iBook still backup wirelessly to my Time Capsule and share (screen and file) with the other Mac in the house?
I have a time capsule hooked up to my mac mini. I don't use it for anything but the hard drive anymore so it is just plugged into the LAN connection. My Mac Mini is getting horrible wifi signal but my MacBook Pro is getting great signal in the same room. I was wondering if the Time Capsule can be used to receive the wifi and run it to my Mac Mini threw the LAN connection? Or can the Time Capsule be used as a repeater and boost the wifi signal?
I'm thinking of getting Time Capsule for backing up my new MBP, but I already have great 100% wifi coverage in my house. I use a Linksys WRT54G running DD-WRT and have an additional Linksys WAP54G downstairs in my house. I perfect coverage and don't need another access point. I do want a good backup solution and like the idea of Time Capsule. So, can you configure it such that it's only used for backing up the MBP? Or does the MBP have to be connected to the SSID for the Time Capsule for backups to occur?
My friend Jenny lives in an apt complex with public wifi access. They have NO access to the router or any ethernet jack, and must provide the front desk with their MAC Address to let their laptops connect to the network. How can we get her MacBook Pro and Time Capsule talking via wifi in this configuration? I'm not sure the TC will be able to join this network. Right now she is at home, and I am testing this config by simply shutting off her wifi connection at her house to see if the TC and MBP can talk with eachother alone...that hasn't worked at all.
We have high speed cable w/ which plugs straight into a router, the time capsule is plugged into the router, and our printer is connected to the time capsule, unfortunately, the actual Motorola (an old) router that the time capsule is plugged into, is much faster, even 2-3x (perhaps more) faster than the time machine on Wi-Fi, my iPod Touch barely loads anything on it (even right next to it), and my dads iPhone only works on the time capsule network.
(This is 2008 Model time capsule, not the newer 2009 one)
The MB Pro is normally within 3-7 meters of the time capsule, I'm not sure why it's so slow, especially when the laptop (MB Pro) is down in the bedroom (maybe 20-25 meters away, in a very open house), it loads incredibly slow! I'm wondering if this is normal behavior? or are there settings to configure or what? I was also thinking of getting the newer model, and get an apple TV, but I'm worried that it might be incredibly slow, based on this previous model we have.
I've noticed that in the past few months, Time Capsule has really slowed my wireless connection down a lot. And I mean a lot. Like down to 1.0 Mbs sometimes, slow enough that I can't even watch videos via Hulu because they can't stream fast enough.
Just for background, I'm running FIOS with the Actiontech wireless modem/router hooked to my TC via bridge mode. I have the wireless on the Actiontech off so as not to interfere with the TC, so there's no possible wifi interference. It was great when I first had this setup (20 Mbs up and down), back in Jan. It has been super up until a couple of months ago. At that time I did update to the latest firmware on the TC. But once I noticed the slow down, I reverted back and it's still slow. When I hook the computer directly to the modem, I get the 20 up/down as before. So clearly there is something wrong with the TC. I've already changed channels, but don't know where to go from here.
after reading a lot manuals and threads I'm now completely lost and can't get it run.
This is what I'd like to do: 1. I have Linksys router set up as wifi hotspot 2. My iMac accesses internet via wifi via linksys 3. I'd like to hook time capsule via ethernet cable to my imac 4. i want time capsule to use my iMac's internet but extend at the same time the wifi internet access
a. Can I backup from iMac to time capsule via ethernet? b. Which settings I have to do on my iMac and which on time capsule to get my scenario run ?
Sorry if this question has been asked many times before - I tried running numerous searches, but it's been difficult to find a straightforward answer to my predicament.
I have a time capsule and an airport express. I would like to extend the range of my wifi network as my modem (attached to the time capsule) is on the third floor of my home and I'd like to improve the strength of my internet connection to the lower floors. I've tried to set-up airport express (located on the 2nd floor, but initially set-up near my time capsule) and the time capsule with the extend range options, but my airport express doesn't seem to improve the range of the wifi. I tested my internet speed by running the test away from airport express, near airport express and with my laptop connected to airport express via ethernet. In fact, connecting the laptop to airport express seems to produce the slowest download speed and being near airport express does not seem to provide faster download speeds.
Can someone point me to straightforward instructions where I can setup airport express to extend the range of my wifi network that uses time capsule? Also, how will I know that airport express is extending my range? When I view my wireless networks, should I see my airport express as one of the wireless networks that I can connect to?
Is there a way, in the settings, to turn off the Time Capsule's Airport wifi? I've been looking at the "Apple Airport Networks" and the "Designing Airport Networks" manuals and haven't found an On/Off setting similar to the MBP's Airport On/Off. I live in a high-rise, with a lot of wifi networks, and would like to configure the Time Capsule via wired LAN with wifi off, until it is secured with WPA2 encryption, and MAC address filtering. Also, I will probably be using the gigabit LAN connection most of the time, when at my desk.
I'm facing a very misterious issue with my internet connection, using a Time Capsule; If I use a network cable to connect to the Time Capsule, the connection to the internet is very slow (Maxes at 2mbit, never more). If use a wifi connection to connect to the same Time Capsule, internet is flawlessly fast, reaching well over 80Mbit.
I checked and the ip is always the same, the downloads are the same, at the same time. Even trying with 2 computers (a Macbook and an iMac) (one over wifi, one on ethernet cable) the one using wifi can download stuff way faster. If I switch connections the one using wifi is always faster.
I use DHCP for both ethernet and wifi on the same local network, all the machines can see each other, it's just the internet connection that becomes so slow when using ethernet. The local network as as fast as a gigabit connection allows. The Time Capsule has the latest firmware installed, and has no problems at all besides this internet issue.
I have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.
Two questions: 1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network? 2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
I currently have a Belkin wireless-N router (the cheapest one I could find, regrettably) so that I can have wifi in my dorm room, but this router isn't cutting it anymore. I've given the password to a couple of my friends, but their favorite things to do while on my network are Skype, Hulu, and ESPN streaming--leaving me with an unreliable, slow wireless connection.To help with this problem, I want to buy a Time Capsule--I'm really looking forward to using its wireless backup and printer sharing features. My first question is, though, will a Time Capsule be able to handle multiple bandwidth-hogging wireless connections faster and more reliably than my cheapo Belkin router, or will it also choke? (I know for a fact that the problem isn't my university's network, because I get blazing fast download and upload speeds via Ethernet.)
I have a mixed Mac/PC environment - Macbook Pro (snow leopard); iMac 21 (leopard); 2 x Dell laptops (XP) - and an existing wifi network from a Belkin 8233-4 N modem/router. Also connected to the wifi network is a WHS for backing up the laptops; an HP printer; 2 iphones; an xbox 360; and a Wii.
I've just bought a 1TB Time Capsule to use to back up the Macs as my previous external time machine hard drive just died (which was connected via USB to the iMac).
At the moment, I've got the TC set up to join my existing wifi network (it's connected via an Ethernet cable from the Belkin wireless router), however I'm getting issues with the wifi network not working properly and being unable to connect to the internet. Every time you wake the Mac, you have to manually reconnect to the wifi (and sometimes even re-enter the password), and things work OK until the Mac goes back to sleep. When I go into the Airport utility, the settings say that the TC is set to create a new network, so I reset it back to join an existing network via ethernet, but then if I go back to these settings a little later (after having problems with the wifi connectivity), they have reverted back to create a new network !
I go to connect to my dorm room's wireless network with my macbook pro which I purchased in late march (worked great on my wi-fi last year), but this year, I choose the network, enter the password, and get this lovely notice.
I have a time capsule and a MacBook Air for the last number of months. Both had been working perfectly and even when my neighbour came over with his MacBook, we could quite easily network between the two computers and connect the two to the internet via the time capsule... Furthermore my MacBook air backed up regularly to the time capsule using time machine without a problem.
Problem. I got a new iMac and uploaded an imprint of my MacBook account and data onto it from the time capsule. I now cannot connect the two computers to the time capsule simultaneously, cannot network between them or cannot have both connected to the internet at the same time.. Furthermore, neither will back up to the time capsule using time machine. Very frustrating, because I know that it is something very simple causing this, but I am new enough to Mac and cannot resolve.
Ok, so i picked up a 2TB Time Capsule a couple days ago and have tried everything i can think of to get this to work, but im at a loss... I had been previously using Time Machine to backup to an Ext HD attached via USB, and that always went smooth as butter.
I have updated to 10.7.4, and now Time Machine does not work on my Time Capsule. I have erased all backups using the Airport Utility. When I try to run Time Machine, the disk is mounted, files are calculated, backup starts, then stops, and no backup is done. Also, no error messages.
Searched and couldn't find a solution, so here's my problem. I've got a network setup trough a 1TB Time Capsule, ~18 months old. 2 MB's and one MBP on the network, and also a Samsung CLP-315W color laser printer (wireless connection, not USB). Everything has always worked well. I just bought a Canon CP800 compact photo printer for my wife and would like to connect it through the TC's USB port, for wireless iPhoto printing from her MB.
The printer shows it's connected to the TC, according to its built-in LCD screen, and the printer shows up in any of the laptop printer setup utility screens. The latest Canon driver has been installed, and the printer works properly as long as it's hardwired to any of the laptop USB ports, but not through the TC connection. Here's the error screen which appears when trying to complete the "add printer" process through the TC's USB port.
I'm working on a Tiger OS and I cannot connect to my time capsule. I followed instructions in the manual, but I simply do not see Time Capsule on my desktop, and there is very little info in the manual. I am working off of ethernet, not airport, and would prefer to used ethernet for the moment. I have it connected via LAN port to my macbook pro. There's only one ethernet port on my computer. Does anyone have any advice? I know about about Macs, but dont have much experience with network specs.
I am planning on buying a Time Capsule (Old version) but before that, I want to know if it is possible to connect it to my current router and set it up to 5Ghz only? Because since I would have two router I would like to set up one on 2.4Ghz for my ipod and other "G" devices and the TC on 5Ghz for my macbook only. Or do I have to get the new one for the Dual Band connection?
Basically I have a PS3 (silm, if that matters), and a Time Capsule connected to my router via ethernet , and Im using the TC as the network, called "PamaJama". Basically it connects fine when I connect via ethernet, but when I try to use it wirelessly, "PamaJama" doesent show up. And When I go to put it in manually, it doesnt ask for a name... I know the password is a WPA2 Personal, and that doesent come up as a catagorie either. If I where to change the password to a WEP, would it show up? If yes, how do i do that? and if no, do you know what I have to do to get it to connect wirelesly? I can always just leave it connected via ethernet but I would love for it to connect wirelessly so i could play it up in my room.