Hardware :: Western Digital MyBook Studio Edition 1TB Reads Then Slows Down
May 15, 2010
I have a WD MyBook Studio Edition 1TB that's been OK for about a year, but recently it's been acting weird so I ordered an advance replacement from WD and am in the process of transferring all my stuff to the replacement drive. The old drive will read and write fine for a few seconds, then it just slows way down. For example, I am copying files over right now, and it just blazed through about 500 MB in a few seconds, and it's taken it about 15 minutes to get to 550 MB. Obviously something is wrong, but I'm looking for any advice on how to keep this thing alive or speed it up for just a few minutes while I get everything off of it.
View 1 Replies
ADVERTISEMENT
Aug 17, 2009
I bought a Western Digital MyBook 1TB external hard drive a while ago and it was working fine with my Powerbook G4 running Tiger. But when I wanted to have it connected to my Intel Mac Mini running Leopard it always has a few problems.
1. It randomly disconnects and the message for external hd not ejected properly.
2. When I try to copy a large file to it like a 500MB file it goes so slow and when it looks like it will finish I get the error code -36
3. After all the problems 1 and 2 it won't eject and when I try to unmount it from disk utility it says it can not be unmounted.
I have tried to reformat the drive for mac with the extended journaled and partitioning and erasing with boot disk procedures. Still nothing seems to work.
I don't know if this matters but I bought it at a Walmart and it wasn't mac formatted. Would I have to specifically buy a mac formatted external hd in order for it to work in leopard? Or can I some how format this to work properly on my computer. I also have an Iomega 120GB drive that I bought a few years ago from [URL] and it works flawlessly on both my PB and MM.
I just have a hard time believing that only certain hds will work for an intel mac running leopard. I thought all hds were the same and could be formatted to run on any system.
View 2 Replies
View Related
Jan 1, 2010
i have a macbook pro running snow leopard. i have a western digital 1tb my book home edition. i have used it many times and had no problems. i have not used it in the last two weeks and when i tried to plug it in today, it looked okay at the beginning, lights were blinking and the drive was spinning but it didn't mount. it wasn't recognized and so i unplugged to try again. now...when it is plugged in to the wall, the light blinks about once per second but the drive doesn't turn on or spin. when i plug it via firewire into my computer the light turns off and the drive continues to stay off. as far as I know, the drive was not dropped or damaged or removed improperly (with the possible exception of what I just did). because it is not on, it will not show up in disk utility either.
View 2 Replies
View Related
Apr 16, 2009
I am looking at the WD MyBook Studio Edition II 2 TB and have some questions I need answered before getting it. Perhaps someone who uses it with their mac knows the answers.I want to use it with the RAID1 configuration. As I understand it it will then be seen as a 1 TB drive to the operating system, and the 1 TB data will be mirrored on the dual 1 TB drives.1) Can the 1 TB RAID1 drive be partitioned into multiple logical partitions?2) Can the 1 TB RAID1 drive be formatted as NTFS?3) Can the 1 TB RAID1 drive be partitioned into multiple logical partitions formatted with different file systems?
View 15 Replies
View Related
Oct 28, 2009
I have a 500gb WD MyBook external hard drive... I only have about 150 gigs on it, but it tells me that there are only 113 gigs left, which I have figured out is because it does not seem to actually free up space when I delete files from it. So, essentially, every time I add a file, the space that that file fills is filled permanently, even if I later delete the file. The only solution I've been able to find from browsing forums and googling is to partition my hard drive as Mac OS X Journaled (extended), but it is already partition thus. I don't have the space on my internal hard drive to move everything onto it while I completely reformat the external.
View 4 Replies
View Related
Jul 24, 2010
I just got an iMac a month back and I would like to use the Time Machine feature on iMac, which takes weekly backups for me to one of my External Hardrive, which I have.
View 4 Replies
View Related
Jul 30, 2008
I noticed that one my my partitions didn't show up on my new (its been used for only 2 weeks) western digital My Book home edition didn't show up. I used Disk Utility to do a simple "Repair Drive", and that did the trick. However, its been a bit noisy and its started to make a grinding sound. Time to replace, or am I just getting paranoid?
View 1 Replies
View Related
Mar 19, 2010
Just got a WD My Book World Edition II 2TB. I would like to reformat this drive specifically for mac. It's sole purpose is to be used with Time Machine.
I currently have the drive connected to my IMAC via ethernet. Finder shows the external HD listed under Shared as MyBookWorld and another one as MyBookWorld-Backup. Time Machine preferences/select disk shows this drive as "WD_Backup on MyBookWorld-Backup".
Using DiskUtility.app the drive DOES NOT show up!
Should I send this drive back from where I ordered? Anyone have any experience with this drive? Should I even bother to reformat?
I have NOT installed the software that came with the drive? Why should I?
View 1 Replies
View Related
May 8, 2009
Reality: "Will perform initial backup with Apple Time Machine and before the next backup will enter sleep/standby mode. This will require you to manually drag the external hard drive icon to the trash, unplug the drive, shut down your computer, restart it, plug the drive back in, and backup with Apple Time Machine manually.
View 13 Replies
View Related
Oct 28, 2009
I cant get anything to work on my Western Digital My Book World Edition ii. I have it plugged in via ethernet to the back of my Airport Extreme. I'm trying to put all of my iTunes library on it so that my media can be played on my PS3 and other computers on my network.
View 5 Replies
View Related
Oct 22, 2009
I just got a Western Digital My Book World Edition II 2TB Hard Drive and I'm trying to get it all set up. I'm having some problems. 1. I wanted it to back up my iTunes library which is on a external hd. I cant figure out how to get it to do that. 2. I'd like to have my iTunes music, tv shows, and videos able to be played on my PS3.
View 1 Replies
View Related
Nov 12, 2007
I just got myself a WD My Book World Edition II 1TB ethernet HD. I can connect to it fine from my MacBook, but on my G5 its a different story. I see the drive on the Network. I then double click on it and get the prompt for the usergroup, username and password, type in the info and I get a error saying it can't see it. What am I missing? OS is 10.4.9 on G5 and 10.4.10 on MacBook.
Information:
Power Mac G5
Mac OS X (10.4.9)
Dual 2.0 GHz
View 3 Replies
View Related
Mar 25, 2010
I've only had this drive for a few weeks, but I've noticed a tendency for the thing to always be running even when there's nothing for it to do. The head will click and gronk around continuously, the status light cycling over and over again. This generates a fair amount of heat in the drive after a while, and I imagine it'll wear down a lot faster if this keeps up. I've tried several different approaches to solve this, including many wipes and reloads. At its worst, the drive would grind away even if the computer was asleep or the drive disconnected from the computer. A few times this happened immediately following a reformat on a supposedly "erased" (but not zeroed) disk.
Nothing seemed to solve it. Western Digital recommended that I try plugging it into a different outlet, which I did. This has calmed it down somewhat, but the problem mostly persists, and I continue to get frequent "drive in use" errors when I attempt to eject the disk, even though as far as I can tell nothing is using it. One odd note: earlier today as it was chugging away, I quit the one program open besides the Finder (DragThing), and the churning immediately ceased. It's quiet for now, even after reopening DragThing, but I'm just waiting for something to get it all riled up again. I've observed this behavior on a Power Mac G5 running 10.5.8 and a March 2009 Core Duo iMac with 10.6.2. I'd really rather not ship it back to WD just yet.
View 6 Replies
View Related
Oct 31, 2009
1. Does Anyone Notice That The Realtek Windows Drivers Sound Quieter Then The Way The Mac Sounds Using hd280 pro headphones here
2. Does anyone and am ready to pull my hair out here notice if there western digital goes to sleep when ever it god dam pleases under windows 7 jeez i can be half way through copying a file and poof drive goes in to sleep mode
View 2 Replies
View Related
Dec 25, 2008
I have a 1Tb WD my-book studio that my mac will not recognize. It has worked for over 6 months but now it will not show up on the desktop
It seems to work via USB but not Fw800
View 2 Replies
View Related
Apr 7, 2009
I have just had a catastrophic failure of a Maxtor basic 1.5TB USB HD as a TimeMachine backup. I was being cheap as the HD I really want is a 2TB MYbook Studio edition.
I have an iMac 24" with a mybook studio 1TB as my iTunes and Movies drive. It is in the 800 firewire socket. If I buy a 2TB I am left with 400 Firewire or USB.
My question is, can I add the 2TB to the firewire socket on the back of my 1TB mybook?
Or am I best to put it direct into the machine (iMac)
View 5 Replies
View Related
May 24, 2009
I just received a WD Mybook Studio 1TB to be used with my new iMac. Only one big problem, whether the hard drive is connected to usb or firewire 800, it will skip when playing any file like a movie or music. I ended up downloading and installing the newest firmware and formatting the hard drive. But still, even now it keeps skipping.
Disk Utility shows, after verifying, the hard drive is ok. No need to repair anyways. Is there any other way to be sure the hard drive itself is broken?
View 7 Replies
View Related
Mar 17, 2009
Has anyone tried connecting a WD My Book Studio Edition external hard drive to one computer via USB and to another computer via FireWire 800 simultaneously?
What are the chances that both computers would be able to access the drive simultaneously?
View 2 Replies
View Related
Nov 29, 2009
Specifics of my own issue:
new iMac 20� (latest iteration, firmware up-to-date), OSX 10.6.2
2.4 GHz Intel Core 2 Duo Processor
Recently instaled Snow Leopard.
Purchased: WD My Book Studio 1Tb.
View 1 Replies
View Related
Sep 10, 2009
1) Is the Western Digital 1TB RE3 3.5 HD recommended for the 8 Core MP? Or am I better of sticking to the WD 1TB Black Caviar? 2) When ordering my HDD do I also need the cables? Or do I just need to order the drive as it is?
View 3 Replies
View Related
Apr 30, 2007
I have a WD External HDD. Everytime it goes to sleep it disappears from my Finder in OSX and then I have to turn the power off on the HDD and turn the power back on for it to reappear in my OSX. It's rather annoying - in Windows it just stays there and you click on the icon and it will wake up. Is there any way to force OSX to search for the HDD or something and not delete it every time it goes to sleep?
View 10 Replies
View Related
Apr 6, 2010
Well, as some of you may think that VelociRaptors are dead, they aren't. They were great few years ago when there were no SSDs for reasonable price but got then owned by SSDs due their fast speed. WD has came up with two new VRs, 450GB (299$) and 600GB (329$). They are both 10 000rpm drives and improvements for last generation are 32MB cache instead of 16MB, SATA 6Gb/s, 0.4ms seek time (was 0.75ms) and transfer speed of 145MB per second (was 128MB/s). Platter size has also increased from 150GB to 200GB so they were able to keep the same form factor (3.5") and come up with larger capacities.
Still can't beat SSDs in speed but the price is five times cheaper per GB than in SSDs. Very detailed and massive article available in AnandTech (thanks Eidorian for letting me know about that site, love it!)
View 3 Replies
View Related
May 12, 2009
I am a frequent guest on this board and bought my first MBP two years ago. To set up TimeMachine, I just got this new hard drive:
[URL]
It works flawlessly and is quite fast with FW800. However, I only have it for two hours now and already find the flashing white LEDs really annoying. They distract me from working. I could use tape to cover the LEDs, but it would not look good and there would still bright light when it's dark in my room because I can't cover all of the smaller openings. I googled for a solution to disable the LEDs but only found this:
[URL]
Obviously, this is for the network edition only, you would have to set up a php-server and so on... to be honest, I don't know a thing about that stuff.
View 16 Replies
View Related
Dec 13, 2010
alright so i bought a 2TB External Hard Drive and i was wondering if we could you the hard drive as your main hard drive like the Mac system files ect...? because my current one (250GB is kind of small) compared to the 2TB
View 7 Replies
View Related
Dec 27, 2010
I received a WD My Book and the Apple Airport Extreme for Xmas. I connected the External HD to Airport so I could use it as a network drive for Time Machine and some extra storage. Everything works great, but the WD My Book has its own power supply and on/off switch. Is it okay if I never turn it off, or should I turn it off when I'm not using the extra storage?
View 5 Replies
View Related
Aug 5, 2009
Does anyone know if the new Western digital scorpio blue drives - 750gb and 1tb.. fit in the Mac Mini? Or the Macbook pros come to that?
View 5 Replies
View Related
Aug 12, 2009
Just recently got myself a Mac Pro with the standard 600GB HDD, I'm thinking of buying a 1TB drive to give myself some more space. I've decided on a Western Digital, 2 models actually and I need some suggestion in deciding which one.
- Western Digital Caviar Green 1TB
- Western Digital Caviar Black 1TB
View 3 Replies
View Related
Nov 11, 2009
I pulled up the information and it said i was only using 35GB and it said I only had 600 some MB available. I tried deleting a movie file from it and the available space amount did not change. I added the movie file back on to it and it took away even more space! I now only have 273 MB available on a hard drive that should contain much much more.
View 7 Replies
View Related
Feb 13, 2010
I recently upgraded my macbook pro 2.16 to a western digital scorpio (WD3200BEVT). The first day I did not notice the noise at all.. Now it seems to have a clicking noise every 5-10 seconds. I also have a kernal panic today which is the first in 2 years..
View 1 Replies
View Related
Feb 16, 2010
So here's the deal. I got a new WD Passport Essential + Smartware (the new one) as it was on sale. So I partitioned it with GUID map gave a nice Mac OS Extended Journaled partition then I made a FAT partition, went to my cousins PC and Ubuntuized the FAT partition with Unetbootin. I couldn't test it there because I went in a rush. Got home and tried to boot it. And of course while pressing alt it didn't recognize it. Did a little searching and supposedly Western Digital drives don't work well with PPC macs when it comes to booting. I can't test it with a LiveCD or a Windows machine. I would say it was because of the PPC issue but this is an intel mac.
View 4 Replies
View Related
