I know that FAT32 has a 4gb limitation and I need to transfer a folder with 2 disk images that are 7gb each and have tried splitting them but it never seems to work and when it does I can't join them again. I cannot format the drive either as I have over 500gb of data on it.
View 5 Replies
I have an external external 500gb Seagate hard drive, that works fine as a USB external but I wanted to put it inside my MacPro, is this possible without any need to format, just plug and play?
View 1 Replies View RelatedWhat is the best way to make a FAT32 partition on a MacBook's internal hard drive? (I plan to use it to share files between OS X and Windows.) I did some research on this, and some people say to use Disk Utility, however, the only disk format available for me is "Mac OS Extended (Journaled)" and there are no FAT32 or FAT or MS-DOS options. Perhaps those options were taken out since then(?). One other person said to create the partition using Windows, which I think would work, but I'm a little worried about that because I've read that editing partitions outside of OS X can prevent Boot Camp from seeing the partitions.
I'm thinking that my best bet would be using Windows to shrink its own partition, then turning the resulting unformatted space into a FAT32 partition. Since I'm not touching the OS X partition I'm hoping there wouldn't be any problems. I just wanted to confirm whether or not that would work and/or what a better method would be.
I currently host my iTunes library on an external HDD which I set up to use on my Mac Mini. I just successfully swapped in a WD Scorpio Blue 640GB HDD into my MBP A1211 and also fresh installed Snow Leopard so the laptop is clean and free of anything I don't want. Even ran Monolingual thanks to advice I read on here.
So basically since my MBP's HD is large enough to comfortably accommodate my iTunes library I'd like to copy it onto it's HD from my external.I did some searching but it was mostly how to transfer from PC to MAC with external blah blah. My situation seems easy enough since I already have my iTunes in an external...
I'd love to just drag it over to my BMP's HD but I want to do it right.Can someone give me the steps to get my iTunes into my MBP?
current iTunes already in external HD and being used by Mac Mini. need to transfer iTunes copy from external to MBP's HD. Want steps, thanks!
I have an external hard drive with several music folders on it. Volume is formatting FAT32 so I can move/edit between osx and windows. When on the OSX side, several folders are renamed into shorter versions. If I try to name it the original folder name it SHOULD have, OSX says I can't because it already exists.
I've attached a screen shot of one of the folders. This folder is supposed to say "red hot chili peppers - mother's milk 1989" :-/ Is this just a downside to using a fat32 volume in OSX? All the folders look fine in windowz.
I formated a new 1.5TB WD hard drive, using the eSATA cable - in the FAT32 format so I can use it on my PC as well. (It was formatted on the MAC)
I was working on the Hard Drive via eSATA and the express card. Then the Hard Drive was accidentally unplugged. Subsequently, my MacBook Pro didn't like that and gave the warning message to properly eject ... too late! I restarted the MAC and it still won't recognize it - I've tried eSATA, USB, firewire- and nothing. The hard drive was all 3 connections. So, I tested the HD on a friend's MacBook Pro and the hard drive is recognized without any hesitation and it works fine. So, there is nothing wrong with the Hard Drive - its my MacBook that won't recognize it.
The HD won't even show up in disk utility of my MAC. I've restarted many many times and I've tried every port available.
I am using this guide to get a new HD into my PS3: [URL:...] It says that the HD I back my PS3 up to needs to be formatted to FAT32. I have an external HD that I use with my mac, its partitioned into 4 parts. I have one partition which I don't use which I want to back my PS3 onto. In Disk Utility I select that partition and I only get 4 option under the Erase tab, 4 different Mac OS Extended options.
View 2 Replies View RelatedI have a macbook pro with an external harddrive formatted to MS-DOS FAT32 and want it to accept files bigger then 4gb (ie. HD Movies). Is there a way to change the individual movie files to be accepted by the Harddrive or do I have to reformat the harddrive completely?
If I do have to reformat my harddrive what format should i do so?
I want my external harddrive to be able to work on Windows and MacOS as well as accept files of any size (ie. over 4gb at least)
I just put a second HD in my G5 and want to transfer all the applications, data, etc to the new drive to use as my main one. Can I use Migration Assistant, or do I need to do something else?
View 5 Replies View RelatedI was using my external hard drive with my mac and its formatted in the MAC HF(something like that) file system. I would like to format that external hard drive such that the file system is either NTFS or FAT32 so that I can use it on my windows partition running on boot camp. I am asking this question since I am planning to get a new HD for my mac and use the old one with windows.
View 10 Replies View RelatedSimply looking for an application, preferably free, that will allow me to write to my NTFS external HD. I had this external as FAT32 before which was not problematic until I started downloading 720 and 1080 .mkv movies that were larger than 4gb. So I reformatted to NTFS which will accept files larger than 4gb but realized that OSX don't be got the ability to write to NTFS.
View 6 Replies View RelatedI am trying to reformat a 500 GB USB HDD to one FAT32 partition so that I can use it on a Mac and a PC. I have seen many references to using the disk utitilty and creating a partition in MS-DOS format, but my computer does not have that option. The only four options I have are Mac OS Extended, Mac OS Extended (Journaled), Unix and Free Partition. Am I missing something here?
View 7 Replies View RelatedProbably about 10 years ago I was a big techie with DOS and all that, and now I seem to have forgotten how to do anything!
Two questions.
i) My iMac, which I bought last year has run out of HDD space. What can I do to extend it? I really can't work out what I have filled it up with as I have only
8.5gb in my applications folder
4.7gb in the systems folder
9.1 GB in the libary
40.18GB in the users bit (of which 32gb is music on iTunes)
Other than the standard applications I have a DOS emulator, Office and Spore.
But apparently I have used 200gb?!?!? I can't find where this disk space is being used up. Any ideas on what I can check to clear this out? I put a partition in to possibly install windows, how do I check that's been removed correctly?
Also if I plug in a USB drive to extend the memory how can I get the mac running as if this was actually the normal drive for this computer?
And question ii)
I have a PS3 which I want to back up my info on, but its on a FAT32 format. Can I format a USB HDD in FAT32 using my Mac?
Going to buy a new internal hdd, I have mac os x and windows installed on my stock internal. Any program that will allow me to transfer everything to my new hdd (obviously I'll put the backup on a external hdd) and then not have to install all the programs again?
View 5 Replies View RelatedI'm going to buy my first Macbook this weekend and I'm trying to get myself ready so that I don't have to waste precious playing time on stuff like this I have an external hard drive filled with music, videos and files. I would like to keep using my drive on my mac to access my files and save backups etc. The hard drive is in NTFS format and from what I understand the mac will be able to read but not write to it - which isn't what I want. Ideally I don't want to lose the content on the drive, but if I have to I could slowly copy it all onto dvds. If possible I also want the drive to be compatible with Windows so I can plug it into parents/friends/uni's computers and still be able to view/add content on rare occasions. What format should the drive be and how do I do that? (I think I can manage to do it once someone points me in the right direction)
View 1 Replies View RelatedI just bout this Western Digital External Hard drive, Passport SE. Anyways, I formatted it to MS-DOS (FAT) so I can use on mac and/or windows. One of the other main reasons I bought it was so I could use it to watch videos on my Xbox 360.
Now I've seen tutorials online with windows how to re-format it to FAT32 so it works properly on xbox 360 but cannot figure it out on mac? On some of the tutorials they use certain programs to do it, is there something like that for mac I can download? Is fat32 and fat the same? I know there has to be a way for me to be able to format it to FAT32 using mac.
I'm using an external drive through FireWire 400 on my MacBook Pro with 10.5.5. It's a 320GB with 22GB in "free space" and the rest formatted with HFS+ (used as a Time Machine backup drive). I want to setup that 22GB as a FAT32 partition to be writable in both Windows and Mac. Normally, it sounds like I'm supposed to use Disk Utility on Mac and just choose MS-DOS(FAT). Unfortunately, that choice is not presented. I can choose four different Mac-based file systems, but not FAT. Why doesn't that show up as a choice? I've tried leaving it as free space and using a PC to format it. I've tried formatting it as a Mac-based drive and using the PC to format. I've even tried installing MacDrive on the PC and using that to format it as FAT32.
View 3 Replies View Relatedwhat are the disadvantages of formatting an external drive as FAT32?
Info:
MacBook Pro
i'd like to format my lacie external hard drive with two partitions:
1. HFS+ partition as a bootable clone of my internal drive
2. FAT32 partition readable by any windows (and mac) machine
i'm creating my partitions with disk utility, but i hit a snag when choosing a partition scheme...apparently i cannot choose a different scheme for each partition.
so when i format the drive with GUID, the FAT32 partition is not even recognized by windows XP. but when i format the drive with master boot record (MBR), the HFS+ partition is not bootable...
While using my MacBook to access an external drive which is formatted Fat32, I attempted to slightly alter the name of a file with a particularly long file name. Once I changed the name, the file extension was cropped, and the file became inaccessible. Now I can see that the file is there (with no extension at the end of the name), but if I click on it or highlight it, it just disappears, and when visible, in place of the file icon there is just a dashed line box. The file is also visible with Terminal, but if I try to take any action Terminal reports that there is "no such file or directory."
I tried DiskUtility, DiskWarrior and File Buddy but apparently they don't work too well with the Fat32 format. I also tried repairing permissions, restarting the computer, disconnecting and reconnecting the hard drive, and also rebuilding the desktop (?) using alt-command on startup...all to no avail. It's clear what happened: I screwed up - I should have reformatted the drive before I put any files on it, right? But now, I just want my file back. I know it's there. I can see it, and I'm afraid to alter the drive in any way until I can access this file.
I have an external multimedia disk currently formated in NTFS microsoft format. I'd like to be able to copy content to it from my Mac and a PC so I thought to format it in FAT 32. can anyone tell me if there is a size limit to FAT32. what are the major limitations of FAT 32 vs NTFS
Information:
MACBOOK
Mac OS X (10.5.4)
I have two external hard disks, one formatted as FAT32 and another formatted as NTFS .Both cannot be seen in Finder when plug in. Only another one formatted MAC OS extended can. how to dispay my drive in the Finder (I don't want to reformat it as I have lot of contents and need to be read in my window computer.)Im running Mac OS 10.7.3 on my iMAC
Info:iMac, Mac OS X (10.7.3)
How to convert NTFS external hard drive to FAT32 without loosing data?
Info:
MacBook Pro, Mac OS X (10.5.8), Seagate Agent GoFlex 1.5TB
What I should do? Get an external Hard Drive and transfer all the stuff that's on my macbook now to the hard drive. Just wondering because it will be at 0 soon.
View 24 Replies View RelatedI recently purchased a new SSD and would like to input that into my MBP 2012. If I have a partition on my external HDD that contains the carbon copy of my MBP, am I able to clone it into my SSD after I have installed it in the MBP through the USB?Â
Internal HDD --> External HDD
Place internal HDD into optibay, and place SSD into the harddisk slot
Connect External HDD via USB to MBP
CarbonCopy to new SSD via USB from External HDD
Format Internal HDDÂ
Will this work?
I have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
I have an external hard drive that I was previously using on PC, having attempted to use it on a Mac, it will not write to it. I've found that I have to format to FAT32, which I think i can just about manage (yes, im a girl) but my concern is, if i format through the MAC, will i then lose what's on the hard disk as the tab says 'erase'? I have a lot of images on the hard disk so am a little petrified! Any advice for this really basic question would be appreciated!
View 7 Replies View RelatedI am in need of a data recovery app that can recover data off a Fat32 drive and save the recovered data to a NTFS drive (I use NTFS-3G). I have PhotoRec but can't seem to navigate to my NTFS external to save the data (the only drive big enough to save the data too is my girlfriend's 500GB external and it is NTFS).
Any tips to getting photorec to navigate to the drive (I am pulling from one external to another). Photorec sees the one I want to save too I just can't get it to select it. Also if there are any other programs yall recommend, I will give them a shot.
I installed SL on my hard drive (upgrade from Leopard) and it worked great, just popped in my Intel X25-M G2 160GB today, installed SL.
I checked my About This Mac info and it shows I have ONLY 14GB RAM, I had 18GB before...
Does anyone know why?
I wasn't sure whether to put this post it iTunes (since all my music is played in iTunes) or in Mac Lion.I purchased a new external HD because my old one is about to fail. However, the old one is working fine right now. I have both HD's plugged in to my laptop. I am trying to transfer the music files from one to the other. But the copying gets stuck, and after several minutes, says one of the over 1,000 songs has an error and the copying is stopped. Without choosing a few songs at a time and copying that way, and then removing the file the error message shows, which will take a long time, is there any work around for this?
Info:
MacBook Pro, Mac OS X (10.7)
