I am having trouble getting my daughters new MacBook Pro to print to her Epson CX3810 all-in-one. We are trying to use the gutenprint drivers since Epson doesn't support this printer for Mac. All we get is the message "waiting for device". She has been able to get the scanner to work from XP under parallels. The system version is 10.5.4
Is there another driver out there we need to be using?
I have an Epson Stylus CX3810 all in one. I can't figure out how to get it to scan. There is no scan button and when I open Image Capture it tells me there's nothing connected.
View 3 Replies View RelatedPrinting from any program, Two-Sided Printing on the print prompt screen is grayed out. There's no reason for this, as my desktop Windows does double-sided all the time. I've found a lot of discussions in the Leopard forum about this problem, but none of them used my system or my printer and I couldn't find similar solutions. I'm running 10.6.8., trying to print from Chrome specifically, wirelessly connected to my printer.Â
Info:
Macbook, Mac OS X (10.6.4)
Since I updated my Imac to snowleopard, there is no more printing on the good old epson stylusphoto1200 incjetprinter. even after downloading abaout 1 gigabyte (or 2) of Epson-drivers (from the apple-site) nothing works (" you need to update the software of your printer".. , but everything is updated on softweáre-update..)
Info:
epson incjetprinter, Mac OS X (10.6.8), stylus photo 1200
I have an Epson R1900 and after the update, all my colors look off when printing. I uninstalled the drivers, reinstalled them.
View 4 Replies View RelatedI've tried to print a document with 2side option but on the layout option the selection is inactive.I try to install the latest driver but the result is the same. The worst thing is that with a PC with windows OS it works!
Info:
iMac, Mac OS X (10.7.3)
I recently reinstalled my operating system (OS 10.4) from the original system disks in a vain attempt to stop a problem with Mail (it has started demanding my password repeatedly before it will send any mail). I then had to download and reinstall all the various upgrades since.
Since then it no longer recognizes my Epson SC740 printer. It won't let me install the driver from the original CD - it comes up with the error message "You cannot open the application 'Installer' because it is not supported on this system."
upgraded to snow leopard-now it gives message the "Auto Duplexer" is not installed on my epson Sprx680 combo printer. Got it working fine in "Leopard".
Driver version on printer is V. 8.02. reinstalled combo update for 10.6.1 and still doesn't work. Any ideas out there?
I recently purchased an Epson WF 3520 printer that prints 2 sided. My Mac Maverick with all updates shows that 2 sided is turned off but I have not found how to turn it on.
View 6 Replies View RelatedI have a Epson 3800 and I have been printing a PSD file from my windows laptop and everything works fine, checked colour profile and everything is the same. The Mac has CS4 and the laptop CS3, I let the printer handle the colours. When I print from the Mac the colours come out dull and flat. I am using Epson Velvet Fine Art Paper 13 X 19. Just wasted 2 sheets plus ink!
View 8 Replies View RelatedHow do I get my Epson R285 printer to print double sided in Lion as it used to do on my Windows machine.
Info:
Nokia Bluetooth BH-905 headset, Mac OS X (10.7.3)
May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Info:
iMac, Mac OS X (10.7.4)
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power. Â
Finally the error message: Cannot communicate with the scanner. Â
Info:
MacBook Pro, Mac OS X (10.7.1)
I have just upgraded my Macbook 2.2GHz Intel with 2 GB RAM and 250GB HD from 10.5 to 10.6 My Epson stylus photo R1800 printer has stopped working. I have downloaded the 'drivers & utilities combo package' from the Epson website, installed, restarted etc but still nothing being printed.
View 1 Replies View RelatedI have upgraded my soft ware to Snow leopard and now my almost brand new Epson SX 515W copier printer and scanner will not print. Massage Error:/ System/ Library/ Pri always appears.  have ried down loading also disinstalled printer and reinstalled. Â
View 3 Replies View RelatedWhenever there is a software driver update via Apple for my Epson printer, I always update it. But, is it normal for one to delete and readd the printer to use the new driver? I notice my system says it's the old driver until I delete and readd..
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8), 15" 2.66 GHz Intel Core i7 4GB AG
Just loaded snow leopard and my Epson Sylus Photo rx580 won't print?
Info:
MacBook
Pro, Mac OS X (10.6)
Have just upgraded from Tiger to Leopard, but I can no longer access the print driver for our EPSON Stylus Color 3000 using the Epson StylusRIP. I can see the RIP server ok and it has installed as a printer. However neither of the two PPDs it finds (Gutenprint v5.1.3 and Gimp-Print v5.0.0-beta2) work...I think these are the native drivers rather than Postscript!
I have a copy of the PPD from the 10.4 installation (EPSON StylusCOLOR3000 v3010.106) but cannot install it. Regardless of where I put it when I try and select it with Driver>Other, it is always greyed out even though all the other PPDs are ok. Have even tried compressing it into a .gz file but it is still greyed out.
The only difference I can see is the file permissions, all the other .gz files have a Read&write permission for both "System" and "Admin", whereas my driver doesn't. However I can find no way to assign these users to my PPD file. This of course may be completely irrevelant. In fact if I copy my PPD to the desktop plus some of the other gz files from Library>Printers>PPDs>Contents>Resources, they lose the System and Admion users, yet I can still select those drivers but not mine!
Epson photosmart 7960, any drivers for SL 10.6.8?
Info:
MacBook Pro, Mac OS X (10.6.8)
I have just upgraded to Snow Leopard and at the end of the upgrade the printer drivers failed to load. I have since updated them myself (Epson BX305) but still get an error message 'rasteroescpll failed'. I have an IMac previously running 5.8.0 and now running 6.3.0.
Info:
iMac, Mac OS X (10.6)
I can't check ink levels on my epson stylus r320
Info:
MacBook Pro, Mac OS X (10.6.8)
I have an Epson AcuLaser C2600 which I got some years ago and which has run fine on 10.3, 10.4 and until recently on 10.6. It has suddenly started printing second and later copies of a single page document about 3cm lower on the page than it should. It does the same on pages after the first page in multi-page documents. This does not always happen but does for much or even most of the time. This happens in various applications. Sometimes the printer shows a 'Check paper size' warning but does not stop.
Discussions with Epson have led to checking Print and Fax preferences, Page Set Up, Extended Printer Settings (all of which I'd done) and making some changes to the printer control panel connected to Paper Size and Auto Continue. The problem remains and discussions continue. It is worth commenting that something like this seems to have been an Epson issue for some time but the suggested solutions have not worked for me.
I have stuck on 10.6.7 because there seemed to be a number of printer issues with 10.6.8 and as everything was fine (and I like a quiet life). I have made no OS updates so it is hard to understand why this has suddenly started (unless it is a hardware issue). I recently installed Pages 4.1, the only other changes have been things like updating browsers (and adding a couple of extensions) and other applications.
Info:
mini 2.4 8GB, PB G4 1.67 15" 512MB, ASUS EeePC 701, OS 10.6.7, 10.4.11, Linux
why do my applications quit when I enter the printer setting for my Epson 10600
View 1 Replies View RelatedI have a Aluminium MacBook and for about a month or so it has been sharing files with my XP desktop PC easily. So I decided that I wanted to print wirelessly to my printer (which is connected to my XP PC via USB) from my MacBook. When I set up the printer, it finds it and everything, so i go to Word and try and print a Word Document. On the jobs manager on my XP PC, it says the document name is: 'Remote Downlevel Document' and it says spooling, printing, the either sits there forever or just vanishes. My Printer is a Canon PIXMA iP1800.
View 2 Replies View RelatedI have a Brother 5280DW printer which is supposed to offer duplex printing. I have an IMAC running the latest Leopard, but there seems to be no option anywhere I can find to choose duplex (double sided) printing...
anyone have any ideas or guidance?
In windows while surfing the web you can right click on a picture of something and it'll give you the option to print picture. Is there no easy way to do this in Mac OS X? The easieast way i've found was to copy and paste it into a word file then print.
View 3 Replies View RelatedIn Tiger, there was an option to use Windows Printing via Samba. It was accessed, when adding a printer, by holding down the Option key while selecting "more printers"
This no longer brings up the necessary options in Leopard.
know how to set up Windows Printing via Samba in Leopard?
I have an iMac running OS X 10.6.8 that is connected to three printers. The printer I constantly have problems with is an epson photo stylus 1400. Whenever I try to print a full size 8.5 x 11" page using illustrator, indesign, or from a PDF it shrinks the content by 50%. Some of my prints require borderless printing, something this printer is capable of doing. Regardless of printing borderless or with a border it still shrinks all my prints. All my drivers are up to date, and I make sure that the correct settings are used everytime (actual size, US letter borderless...etc)
Info:
iMac, Mac OS X (10.6.8)
I have a desktop Mac that I used Migration Assistant to transfer my user setting etc. prior to selling my MacBook. All works well, except that everytime I try to print a document it pauses while looking for a shared network volume for a while before coming back saying "Connection Failed to MacBook". I deleted all printers and resent printers from preferences to add them back manually and repaired permissions however the problem is still happening everytime I try to print a document. Its as though its looking for the old MacBook.
Info:iMac, Mac OS X (10.6.8)
When I save a Word 2004 file as a PDF, only the first page is saved/printed.Â
This is a 2 page document. adjusting the settings?Â
Info:
iMac, Mac OS X (10.5.8)
