Hardware :: MacBook Pro 2.2 GHz Intel Core 2 Duo, 15 - When Booted Up And This Is Not Get Norm?
Sep 2, 2008
I have a: MacBook Pro 2.2 GHz Intel Core 2 Duo, 15"(purchased just under a year ago)I sometimes wonder if my computer is running at higher temperatures than one would expect. I've heard about some laptops having heat issues because to much thermal-paste was applied. Mine normally runs at temperatures between 150-160
(currently at 121, but it just booted up and this is not the norm)When the processor is really being worked it gets to: 179-182 This seems very hot to me. Does anyone know what the expected peak temperature should be?
I have a 15" uMBP with the glassy screen, and I love it. I think with the glass, the colors pop, blacks are blacker, everything seems crisp. I really like the black border too.
I considered going matte after having a matte early 2008 non-unibody classic MBP, but I didn't like the silver border with the black rubber gasket going around and standing out so I went for the glassy.
For the most part, I'm happy. I just hate the occasional reflections, but I think the uMBP design is meant to have the black border and the silver border antiglare screen is an afterthought in design.
Should I get a film screen? Or will it greatly reduce the crispness of my picture? I wish I could have a black border uMBP that's crisp but doesn't produce as much glare...
The ivy bridge processors are coming out soon (or may already be out). I have heard that macbook pro 13" models might be able to use the new processers due to their lower energy useage. I presume that I will be able to take my mac to an apple store and have it installed. Is this information true?
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
My one week old iMac 2.7GHz Quad-Core Intel Core i5. first started problems by not goping to sleep even when I forced it.
I shut it down using the shut off button and unplugging it from power for more than 5 munites.
I turned it back on, it does the usual startup chime and then gray screen. I have restarted twice from the shot off button and still getting the same result.
My first generation Mac pro booted into utilities and HD recovery when I restared after installing Autodesk sketchbook pro. This isnt the first time this has happened but last time I was not trying to install any software. Fortunatly, I have time machine backups and therefore have managed to recover the HD to a recent date and I intend to do a complete system check when it has finished.
I've upgraded my iMac 4,1 to a core 2 duo processor in order to install Lion although I still get a message from App Store saying that Lion cant be installed on my computer - I have all the basic system requirments - RAM - free space - latest version of Snow Leopard and processor ...
first, I didn�t know if this thread should be here or in Buying Tips, but anyway. My doubt is about the brand new 27� iMac�s processor, If I should buy a more GHz one, but with only two cores, or should I buy little bit less GHz one, but with four cores.
It really worth pay $200 more? It really worth the four cores? My main needs are run CS4, some Final Cut, maybe Logic Studio, and switch between different OS's (OS X, Windows, and Linux). I think even a 21.5� model would be more than enough, but I just wonder If Quad Core gonna give me more power (I hope so).
I see the numbers of everything from Core 2 Duo, to the slightly faster and cooler Core i3, to the supposedly faster core i5s and i7s. The benchmarks go up accordingly, but I found this does not always equate in a faster experience on most tasks.
Here's my experience so far on processor upgrade:
In one computer trade school re-certification class I am in, we are working with Windows Server 2003 on a Quad Xeon platform and it's incredibly slow.
But in a previous class we had the previous generation server edition on older Xeons, and while not fast, it was much better. On paper the newer multi-core Xeons should have made a difference, but could 2003 server software be that much more bloated than the previous Windows server edition that it would stall like that and make us wish we had the older setup?
I am going to try out the Adobe CS lab and put the new high end Dells to the test there and see if they work better than when we had an older CS version on older Xeon equipped Dells.
I don't know if this is something to do with Dell, or if Apple's increasing processor bumps/generations are going to similarly not make a difference in the speed things appear to go at, whether it's Adobe stuff, server stuff, or anything else that needs power.
I know somebody who plans on a Core 2 Duo, i5 or i7 MBP and I was wondering if the higher end processor is worth it in that case (iMovie being the main program of use).
It seems to me when I restart into XP using bootcamp, my fan in my late 2008 Macbook doesn't seem to be working, or at least not going over 2000 rpm. Is there any way i can fix this?
When I first turned on my MacBook, it never booted up and ultimately the screen went blank. The battery is fully charged and now when I depress the start-up button, nothing happens. Its worth noting that when I close the lid, the sleep light turns on.
I own a G5 desktop (2004) running CS3 and MacBook Pro (2006) 15.6" 2.16 ghz Intel Core 2 Duo. I want to upgrade my CS3 to CS5 but can't on my G5 since it is PowerPC, so I want to try it on my Intel based MacBook Pro instead. I can upgrade the memory to 3GB, but wanted to know from other users out there if Adobe CS5 will be super slow or could even work ok with my laptop? I'm trying to save a little money and time before purchasing a new intel desktop.
My MacBook intel core duo won't star up. I turn it on and I get the Apple sign and then the loading cycle doesn't stop. I've already tried going into my install disk and disk utilities and then repair the disk but it didn't help. Is there anyway to get it to work without wiping my entire harddrive?
I have a 2-3 year old powerbook pro 2.53 intel core 2 duo. It is currently running 10.5.8. Is it possible to upgrade to a later operating system? I am finding that I need newer to run some of the modern softwwre.
There's a lot of people wondering if the 13" MBPs would have been a lot better with a Core i3 processor, but everything has been just hangups over perceived old vs. new technology, and really the only thing the Core i3 adds is Hyper-Threading, but it doesn't have Turbo Boost, which helps the Core i5/i7s tremendously. Let's compare using Geekbench since it is cross-platform and one of the few available sources of info...
Core 2 Duo P8600 2.4GHz (~3362)
[URL]
vs.
Core i3 330m 2.13GHz (~3472)
[URL]
Core 2 Duo P8800 2.66GHz (~3700)
[URL]
vs.
Core i3 350m 2.26GHz (~3680)
[URL]
As you can see in both cases, the difference is pretty minimal indeed, and in single threaded applications, the C2D will easily outdo the Core i3 which lacks Turbo Boost and runs at lower clock rates.
And you get a 320M instead of Intel HD graphics with the new 13".
The Geekbench results from the old 15/17" to the new 15/17" are quite an order of magnitude better.
So unless people are expecting Core i5 processors in the 13", sticking to the C2D was actually a good decision, and given the differences between 2.4 and 2.53 isn't so large, one is far better buying the base 13" and then putting the money saved towards a good 7.2k HDD or SSD.
Note - I took averages of the 32-bit numbers and added them.
Note 2 - The C2D Pxxxx are 25W TDP processors, which are more efficient than the Core i3 which are 35W TDP processors. Less heat, better battery life from C2Ds.
I've been debating whether or not to upgrade my 3 year old 15" Macbook Pro that has a 2.2Ghz Core 2 Duo (Santa Rosa) to the new 13" 2.4Ghz Macbook Pro. FYI... My current system also has 4GB of RAM. Since both systems are Core 2 Duo, what kind of speed bump am I going to see? Would this be a substantial upgrade?
I'm buying a new MacBookPro but can't decide, due to lack of knowledge, wich one to choose and if there's a noticeble difference between,  15.4" MacBook Pro Notebook Computer 2.2GHz Intel Core i7 Quad-Core4GB of DDR3 RAM500GB 5400rpm Hard DriveAMD Radeon HD 6750M 512MB Graphics15.4" LED-Backlit Glossy Display1400 x 900 Native ResolutionSlot-Loading SuperDrive802.11a/b/g/n Wi-Fi, Bluetooth 2.1+EDRFaceTime HD Camera, Built-in MicrophoneMac OS X 10.7 Lion (64-bit)Â
and the   13.3" MacBook Pro Notebook Computer 2.8GHz Intel Core i7 Dual-Core8GB of DDR3 RAM (2x4GB)750GB 5400rpm Hard DriveIntel HD 3000 Graphics13.3" Glossy Widescreen Display1280 x 800 Native ResolutionSuperDrive, Secure Digital Card SlotFaceTime HD Camera, Omnidirectional Mic802.11n Wi-Fi, Bluetooth 2.1+EDRMac OS X 10.7 LionÂ
Besides the screen size, one would be considerable faster?
I use Photoshop and beeing a photographer I deal with large files.
Info: MacBookPro 2.66GHz 4GB 1067MHz DDR3, Mac OS X (10.6.2)
I have installed windows 7 on bootcamp, and currently running max os Lion currently i am having issues accessing the mac os itself. When i turned it on and off or restart it, it always gives me a bootup screen that said Mac OS Utilities, just like the picture in this link : [URL]I tried restarting it several times, it does not boot up my Macbook, to my desktop. I trist the windows it works just fine. Then i tried recovering it 3x, which each takes 6-7 hours to do it. and it still always keep booting up the same thing over and over again.Â
i tried re-installing the OS, but its always giving me message, "this mac os lion is damaged, cannot be installed in this computer" something like that. i've been trying to fix it a day or so, it still wont boot up my Desktop.. I tried restaring it and choosing my disk "Macintosh HD" but it still gives me a recover screen. I also tried pressing the option key then choose my disk, and it still doing the same thing.Â
As title, can it be done ? officially it says no, but iv read around some forums where people are saying it has been done in a 2x 2gb config, I ask as architecturally core duo can support 4gb and does on old IBM laptops of the same t2500 processor (2ghz), so im asking if there is anyone that can confirm this for me ?
I have the following system spec on my Macbook Pro which i bought in Apr 2006:Â
2.16 Ghz Intel Core Duo 2 G 667 Mhz SDRamÂ
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it.
I just replaced the screen a my mbp. It booted up, it loaded, it ran for about 1 minute then died. Efforts to resuscitate it have failed. Nothing happens when the power button is pressed, no fans, no drives, Nothing. The battery is freshly charged. I have tried the take the battery out and unplug it, press the power button for 5 seconds, Nothing.
I recently got a 750 GB WD 'My Passport' external backup drive (the USB3 version) and every time I plug it in, my MacBook Pro starts the spotlight process and then within 5 seconds kicks the drive off!
Then, it gives me the lecture dialogue of dismounting the drive correctly (via Finder for example), not to just pull the drive out of the USB port!
I recently purchased a dongle to connect my 2.0GHz Intel Core 2 Duo white MacBook to the S-video in my Sony TV. [URL:...] When I got it home it didn't work. I went online only to find that my model of laptop is not able to use this dongle. So my question is - how would I connect my macbook to the S Video in of my TV? I'm thinking I'll need to use the Mini DVI to VGA dongle [URL:...] and then use something else to convert it to S-Video.
I have a MacBook Pro 13inch 2.4GHz (Intel Core 2 Duo, 4Gb RAM, 250Gb HDD, NVIDIA GeForce 320M graphics, SD card slot, up to 10 hour battery life) bought in October 2010. The charger has been playing up for a while now - the light going out but coming back on when I move the cable a bit - faulty connection it seems. It has now stopped working at all. Apple UK charge a whopping £65 for a replacement - and the reviews are AWFUL for it, but I can't use my MBP without one.Â
I'm booted on a MacBook Pro from an external drive, and I want to erase the drive inside the MacBook using Disk Utility from the external. For some reason or another, it won't let me do this. When I click on the Erase tab (whether clicked on the disk itself or the volume "Macintosh HD") and try to erase it, it returns with the error:
Disk Erase failed Disk Erase failed with the error: Could not unmount disk.
When I try to install an image onto the drive, I get a similar error, except it says "Operation not permitted." When I tried it while booted with an OS X DVD, it worked fine. As far as I know, I should be able to do this while booted from the external HD.