Hardware :: LED Monitor Instead Of LCD Monitor?
Apr 3, 2009
I thought that Apple manufacturer would start making LED monitors for all Apple's computers - not just a LED monitor for a laptop.
Many TV manufacturers are making new HDTV LEDs instead of LCDs this year.
Many stores marked down most TV LCDs and HDTV LCDs.
For HDTV issue:
How safe are the new HDTV LEDs? For example, Apple sells its LCDs that contain "Arsenic-free display glass, BFR-free, PVC-free, meets its Energy Star version 5.0, Rated EPAT Gold (?)."
View 5 Replies
ADVERTISEMENT
Aug 18, 2010
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
View 1 Replies
View Related
Jan 31, 2010
I have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
View 1 Replies
View Related
Jul 30, 2005
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
View 1 Replies
View Related
Jul 12, 2009
I have a macbook pro from 2007, and I just popped into a tagsale and picked up one 2001 Mac Studio Monitor and a 2001 Fomac Gallery monitor.. So I was hoping to use the monitors with my laptop because the small screen on this laptop is KILLING me, and i'm not yet prepared (financially) to get a powermac.. Paid $10 for both of them..
my issue right now is, the monitor's cable doesnt match the input on my compuer. I need a ACD DVI clip cable.. Now, i looked them up and the price is $100! Call me naive, but i had no clue a connector cable would ever cost that much..
So basically, I am curious if there was a different option to get this to work with my computer OR if there is a place to get a used or "extra" cable
View 2 Replies
View Related
Nov 22, 2007
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
Information:
G5 Quad
Mac OS X (10.5.1)
View 2 Replies
View Related
May 21, 2008
i don't know what I did, but for some reason, new windows on firefox opens on my laptop monitor (instead of my 20 inch LCD, I am running dual screens).
1. I am running dual screens, but my EXTERNAL monitor is the primary one (top menu bar is on the external monitor)
2. All applications open by default on my main monitor, except for FIREFOX.
3. I have tried dragging the firefox window back to main monitor, both in spaces view as well as normal view, to no avail.
View 2 Replies
View Related
Oct 16, 2008
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
View 24 Replies
View Related
Nov 9, 2008
Is there a way to use my external monitor as my only monitor when connected to my mbp? Or, can i clone my display, but at separate resolutions? I am able to do this on windows with nvidia software, is there software that allows further customization?
View 3 Replies
View Related
Jun 27, 2009
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies
View Related
Aug 5, 2009
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
View 1 Replies
View Related
Oct 22, 2009
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies
View Related
Dec 26, 2009
Is there a way to have VLC fullscreened on my second monitor (my TV, fyi) while keeping the first monitor active and clickable without unfullscreening it?
View 1 Replies
View Related
Feb 25, 2009
Debating between two monitors to use as an external with my MBP. HP LP2475w & Dell 2209WA.
HP is a 24" H-IPS panel with 1920 x 1200 max resolution. Dell is a 22" e-IPS panel with 1680 x 1050 max resolution. The Dell is half the price of the HP.
My concern is the lower resolution on the Dell. What difference is there with the lower resolution of the Dell vs the HP monitor? Keeping in mind of course that the Dell is also 2" smaller than the HP. I'd be using the monitor for extended web surfing, writing for long periods in m.word, and video editing.
View 11 Replies
View Related
Jun 18, 2009
is it possible with a single Geforce 120 card that comes stock on the mac pro's?
say i want to connect a 24" dell LCD monitor along with a 19" LCD monitor.
can i do it, or do i need 2 graphics cards?
View 8 Replies
View Related
Jan 9, 2010
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
View 2 Replies
View Related
Dec 12, 2009
I've hooked up my Macbook Pro 2009 to my external monitor and everything works. The issue is the mac image on the external monitor is cut off like I can't see the white top bar. Any solutions to fix this issue?
View 1 Replies
View Related
Dec 4, 2009
Currently I have a 15" macbook pro and a 24" Cinema display since using this set-up can go back to single screen!
Thinking of either getting the big 27" or a base model 21.5" and keeping the 24 cinema display as extended monitor. Any advice would be greatly appreciated.
Any thoughts on the sweet spot of the imac lineup? seems either base model or top model to me
View 3 Replies
View Related
Aug 28, 2010
I have a pre unibody 17" MBP. It has a 200gb HD that is pretty much full. I'm wondering if replacing the HD would void my AppleCare? If it doesn't what would be the best deal for a 500gb or even a 1TB 7200RPM drive out there?
View 3 Replies
View Related
Sep 28, 2010
I have a new 6 core that was delivered yesterday and seems to be working fine.I did have to reset the video card to get the second monitor to work. Apparently the card is so heavy that it is jarred in shipping. My question is I have a 24 inch imac that is working and I think I would like to use it as a second monitor.This has been talked about but I don't seem to find anything about it so does anyone here know the trick?
View 2 Replies
View Related
Jan 5, 2008
i've never had to buy this seperately, but can i buy ANY kind of monitor?i was thinking about this one.plus, i was gonna install leopard on it. good idea or not?i've been hearing mixed reviews on leopard on older macs. some people tell me i should just get tiger. its running panther right now.
View 2 Replies
View Related
Jul 30, 2008
I just bought a new 24 inch LCD monitor. It has a VGA, a DVD-D and a HDMI Port. I have a G5 Mac with a DVI-I and an ADC port. The monitor came with a VGA cable. The sales person sold me a DVI to DVI cable (single link, 18+ 1 pin), but I get this message on the screen - "check signal cable." Is this the wrong cable? I just moved so am thinking it might be that something's loose in the tower. Perhaps there is there a better way to connect the two. When I got home I read in the manual "Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector." but that seems weird since neither of my ports are 2 rows. perhaps I should try DVI to HDMI? I do web design and video. Also, can you get these cables at Futureshop? I am now in a rather small town and don't have a Mac store.
View 4 Replies
View Related
Mar 20, 2009
I have a Tv that I am able to use as a display andi know i need to buy a cable for it but I am unsure wot type i need.
View 3 Replies
View Related
Apr 2, 2009
Is this possible? Is there a workaround for it?
View 3 Replies
View Related
Jul 11, 2009
Does anyone on the forum have experience driving a 3rd or even a 4th monitor using a DisplayLink equipped USB adaptor to drive at least a 24" monitor?
Note: please do not get confused with DisplayPort. Reference to DisplayLink can be found .
I've seen people use the 7" MIMO's that is based on the DisplayLink technology, but anyone have a working knowledge of using the dongle/USB adopter to drive an extra monitor?
Going this route would let me avoid adding an extra video card to the MP.
View 7 Replies
View Related
Aug 1, 2009
I have a '08 Aluminum Macbook what do i need to use my TV as a display?....I cant seem to find any HDMI adapters for the Macbook.
View 4 Replies
View Related
Sep 9, 2009
I've got the older white macbook laptop. Just got delivered was my brand new Dell U2410 monitor (drool) and the adapter from apple that converts mini dvi to dvi-d. The monitor is sitting here and i plug it into my mac via the adapter using the dvi cable provided by Dell and the external monitor displays the default apple background and I can move my mouse around on the screen but that's it. How do I get it to work properly? Do I have to use a separate mouse/keyboard or can I use the macbook keyboad?
View 3 Replies
View Related
Sep 15, 2009
I have already read other threads that are similar... but not the same as this.
I have a 15" late 2007 MBP that has always worked great, until recently. (10.5.8) The screen was blank this morning. I closed the lid, but the computer did not enter sleep. I opened the lid, and still nothing. (I can still hear the fan working)
I held down the power key for 5 seconds and forced the computer to turn off, and then rebooted. The computer started up as per normal, but still no screen activity. I plugged into my TV - no output signal.
I close the lid again to attempt to sleep, but no sleep. The computer is still running, even with the lid closed. I open the lid, still the same.
After doing a bunch of different things over and over, the screen came back on!
I came back to the laptop later in the morning, and I had to spend 1/2 an hour repeating the above process all over again. There seems to be no logic in my process that gets the monitor working again.
Does anyone think this is a monitor problem, or possibly a latch problem? I've heard that the latch is an important part of the monitor...
(I did upgrade my hard drive myself about 6 months ago, but no problems since... until now.)
View 3 Replies
View Related
Dec 5, 2009
I read an article about just using a laptop as your main computer, desktop. So I went to a MBP 2.16 dual core version which has been working out except for times when I need to get accurate color correction for my pro photography business. I have an older, too old now CRT that I hoop up to it many times for photo editing but now I realize that that monitor needs to be replaced. So here is the question what are the pros and cons for adding another computer, do I really need it. I am trying to make a decision. I really like my MBP, I can do everything on it and the speed is fine. Also having only one computer is easy for backing up and not worrying about file sharing and all the nonsense I guess. I have an office with my CRT in there much most of the time but it's dark and boring so I bring my laptop in the kitchen where I surf, edit and watch tv from the living room. That being said I just started to get the bug about a new quad Imac 27" and went yesterday to look at it. I came very close to walking out with it. Yes it would be awesome to have but do I really need it? The other alternative is buying the new 24" ips screen and running that off my MBP when I need to do critical photo editing. Then I am thinking my laptop is over 3 years old now and wonder what is the life on it? I would hate to buy the nice desk top and not use it, plus I would need more backup systems etc. I do you external HD.s for all my clients photos so if I choose to work on them I just move the HD. Any advice? New 27" Imac or will the 24" monitor suffice?
View 5 Replies
View Related
Jan 4, 2010
I want to use the tv as a second monitor on my macbook rather than just use screen sharing to the mac mini.
Is there a program to let me do that? I googled it, but no results, so I am pretty sure it is a small chance of it being possible.
View 3 Replies
View Related
