Hardware :: How To Access Windows External HD For Time Machine
Jul 10, 2009
I have a computer running Windows XP with a external hard drive attached to it. Is there a way to access this hard drive on my mac for use with Time Machine? I'm using a wireless network.
Okay I've had it with VMware Fusion 3, tried Parallels. The graphics capabilities are poor for my standard of work (we use 3DS Max and Maya for intensive modelling during studies). I know my graphics card is quite outdated (ATI X1600) but a lot of the graphics-intensive apps on the Mac side run very smooth.
So I'm going down the Boot Camp route since graphics-wise, it'll use the actual X1600 instead of some virtual one. It's telling me that I need to reformat into Mac OS Journaled or something, and some basic research tells me the only way to achieve this is a fresh install.
My question is, if I perform a Time machine backup onto my external drive, will it restore the applications/settings/files completely how they were, after I reinstall OS X?
So I have a MacBook Pro with Snow Leopard, and I am looking to buy a large external harddrive (1+ TB) to back up my computer with (using Time Machine). Can I do this wirelessly, even though I do not have Airport Extreme or the Apple external harddrive (I will most likely buy a Western Digital or some other big-name brand).
Also, my family PC is running Windows XP. Is a way I can wirelessly back up that computer as well to this external harddrive, or will I need to plug that in to the PC.
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
Unfortunately my 3 month old White Macbook was stolen from my house last week. Insurance has it covered, so when they decide to give me some money, hopefully before the end of 2011... all will have worked out. Even more thankfully new models just came out. Now the problem is that I had a backup on an external hard drive using Time Machine (phew) so no data lost, just that my stolen Macbook was my first and only Mac, and none of my immediate friends own Macs and obviously I cant just plug in the HDD to my XP machine.
I was in the middle of applying for new jobs, I'd like to keep doing that but my resumes are all locked in the Time Machine backups I've done some Googling and I've read that trying to access the files on XP could potentially lead to damaging or loss of the files. I've even tried booting up the ol Hackintosh I made before I went and bought my Macbook but even that isn't working anymore.
The video card in my iMac died a while back, so now I'm only left with my Windows XP laptop. 95% of my data was in the iMac, but fortunately I had Time Machine (TM) backing up on an external HDD. I recently wanted to retrieve some of the MP3s stored in the TM backup, so after installing MacDrive 7 on my PC, I went into the drive to retrieve the music, but I couldn't find it! I see lots of folders with dates on them but no music anywhere.
I tried searching the entire backup volume for *.mp3 and nothing. I tried making hidden and protected operating system files visible and nothing. The TM backup seems fine. I'm sure if I connect it to a Mac I'll be able to access the data. But only having a PC at the moment, how can I retrieve my data backed up by Time Machine and copy it into my PC in a way that Windows can use it?
getting this message even since updated to Lion OSÂ
"The backup disk image"/Volumes/.........MacBook.sparsebundle" could not be accessed (error 111)Â
After review on the forum here. Did try to verify & fixed the disc, re-setup a TM link wirelessly & wired. Delete com.apple.TimeMachine.plist THEN try again to backup. Still back to square one. Â
Looks like I am out of options before I have "format" the disc like a window user. BTW, I have the FileVault on & not able to turn off since not enough space left. And the worst part is I cannot move mush to spare space of extra 23G....So I have not tried if the FileVault would be the issue of all this under Lion or not..
My main Mac is down until I can muster enough cash to replace the video card. on it. It's a Mac Pro 1.1. I have my sister's G4 1.67Ghz PowerBook I gave her sometime ago running latest Tiger version. i want to access some of my Lion Time Machine back up....specifically Keychain and Documents. Â
Is there a way to do this? I can see the directories through Finder, but actually going through Time Machine to recover these files is not even available to me.
I had to do a complete reinstall Mavericks and since then, some of the folders (the major ones like "documents, pictrues, etc…") are not accessible anymore when I go into time machine (they are crossed with a no-entry sign). I did a disk repair but still no more access…
Info: iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
I have 10.4.11 installed and have some time machine backups from a leopard system on one of my externals. When I try to navigate to one of the backups and get into any of the user folders like documents, pictures, etc it says I don't have permission to access them? Yet I check the permissions and they are read/write.
In my Time Machine preferences, it says my oldest backup is Feb. 3, 2012. However, when I enter the Time Machine interface, I can only go back to March 7, 2012.Â
When I look inside the hard drive from my finder, it also only has folders that date back to March 7.
I know that the other data is in there somewhere though, because the drive space is used up more than just a couple days worth of backups. accessing my old backups past March 7?
Info: Mac Pro (Early 2009), Mac OS X (10.7.3), 30" Apple Cinema Display, 12GB ram
I recently re-installed OSX Lion and made sure i'd backed everything up before I did a clean install and did not want to transfer my old archive across. I need to access my user library on Time Machine so that I can restore my Transmit favourites and Little Snapper image database. Â I've tried following the process here:[URL] but I get "The folder can't be found" (see screenshot) and now i'm at a complete as to what to do.Â
For a couple of years I was backing up my old MacBook using Time Machine to a 1T Time Capsule. I had two profiles on my Mac, but eventually I deleted one of the profiles. I always thought I could use Time Machine to go back into the Time Capsule and retrieve files from that deleted profile from a date before it was deleted, but it seems it will only access my main profile.
I recently upgraded to Yosemite on my iMac and now I can not access backed up data on my time machine. Time Machine will open normal, but does not allow me to click on different favorites to the left in Finder. I tried my other iMac which was also upgraded to Yosemite and even though this Mac is connected to the time machine via cable, I still can not access favorites in Finder. Seems like Time Machine is frozen.
The following error message appears when I attempt backup using TM;
"You do not have appropriate access privileges to save file ".0019e33d49f6" in folder "Time Machine Backups".To view or change access privileges, select the item in Finder and choose File > Get Info."
Spotlight can't locate this file, I've ran disk utility to verify and repair the internal drive, verified the external, no problems on both counts. I even tried allowing read & write privileges temporarily to everyone on both drives, but no luck.
I have a USB disk attached to my Airport Extreme, and use it as the target of my time machine backups from my mac book pro (connected via WiFi). For the most part things work fine. But if my macbook goes to sleep, after it wakes up it often (not always) gets the next time machine backup to fail with a message saying that it cannot access the disk. At first I found a brutal method of correcting it: I would disconnect from WiFi, go to my AE and power cycle it. After it came back the macbook never had any problem with the disk. A little more exploration indicated that Lion wasn't unmounting the disk properly. The following works (but sometimes requires a few iterations): I'll go to finder, eject the disk, and disconnect from Airport Extreme, and then go to the terminal and do sudo diskutil unmountdisk disk1 (I first do a diskutil list to find out the right disk)Â
and then ask time machine to backup again. Many times I have to repeat this a few more times before it "takes". Has anyone else run into this? It clearly looks like a bug in Lion, since it never happened until I upgraded.Â
PS. I understand that Apple says that they don't support time machine backup to network disks. But they do to a time capsule! It isn't really different.
I am trying to restore photoshop files I created and seem to have erased by mistake. For some of the files Time Machine gives me the following message :
The opreation cannot be completed because you don't have permission to access " filename"Â
I created these files and they are important and I do not know what else to do to retrieve them.Â
I cannot enter Time Machine (to restore a file that was lost) by clicking on the Time Machine icon. The machine backs up all right, but I just don't seem to have access.
I recently did a complete erase of my hard drive and re-installed Mavericks. I chose to start clean rather than use any Time Machine back-ups. I used the same external hard drive for my new Time Machine back-ups. Now I cannot open any back-ups/items prior to the re-install via Time Machine. They are listed along the right hand sidebar in Time Machine (star wars view) but will not open when clicked on.Â
Some files I can access if I go to the actual backup folder - ex a Pages doc BUT ff I try to open the iPhoto library from the back-up folders stored on the external drive, I get the following error message -
I cannot open the iPhoto "package" to access individual photos from these back-ups.Â
So - how can I get Time Machine to allow access to the pre-install back-ups??Â
I have a new macbook pro and I would like to have access to my old files and pictures that were on my old computer. I backed up my older mac onto an external hardrive using timemachine. Can I access those files without "downloading" it all onto my new computer? If so, how? If I can't, do I just need to get a new external hardrive and manually copy those files onto it from my old computer? I still have it and it is still working, just slowly.Â
I switched from a Mac Mini to a Retina Display Macbook Pro. When I hooked up the external drive I've been using for Time Machine to the MBP, I went through the setup for Time Machine and it created a backup of the MBP. That is the only backup now showing when I enter Time Machine. How do I access the previous backups from the Mac Mini through Time Machine? If I open the external hard drive from the finder, I can see the backups on the drive.
Info: MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4)
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
As my 160N series Linksys router neither has gigabit ports, usb connector or dual band networking, I am looking for a replacement.
When it comes to Apple routers I am looking at 2 options - either the base station with an external USB drive or get a 1TB capsule with the buildt in drive and worries regarding reliability.
What I like about the Time Capsule is that it is neat to have all in one, takes up less space and only has 1 plug to attach, while Iike the idea that I can just connect a bigger drive later on the base station solution.
1. Will the connected USB drive function just like the internal drive in the Time Capsule for Time Machine use?
2. Will everything be transparent to Snow Leopard?
3. In case of both units with an attached USB drive - can I control who actually can see the drive and access it?
4. Do they support this DNLA thing so that e.g . PS3 can access an attached drive??
I have an iMac desktop with OS X version 10.9.4 Mavericks operating system. Processor 2.06 core 2 duo Memory 4GB 1067 MHx startup disk hard drive.Â
Problem is I deleted some photos from my hard drive to free up space, thinking I could access them from my backup drive if I needed to. However, when I try to get the photos through my TimeMchine backup drive, it won't let me, saying it's not the original library. How do I access my old backed up photos?
I just made a TM backup of two user accounts (A & B) on one iMac.I now want to delete the files and accounts from the iMac and create a new user account.(A & B shared this computer and it is now going to be used by a third person alone. I don't want all the additional unused A & B account data clogging the hard drive.)Â If I delete the original A & B user accounts, will I still be able to access the backed up files? How?
Info: Mac Pro, Mac OS X (10.6.5), iBook G4/iMacFP/G4Tower/Bondi/3400/165/SE/Plus
I picked up my first Mac about a 2 weeks ago and over this past weekend I picked up a new Time Capsule. Originally I bought the Time Capsule to wirelessly bridge to my Linksys router running DD-WRT (mega) but apparently the ethernet ports won't work on the Time Capsule or the Airport Extreme when connecting them to another party wireless router. So i have taken out my Linksys and am now only using the Time Capsule. The reason for the Time Capsule is to have backups on it and that for some reason I do have wireless issues with my Linksys that I am not having with the Time Capsule. Such as when I had a iPhone I would lose my wireless signle a lot and have to reboot, same with my iPad and sometimes with my Nexus One. So far none of those issues with the Time Capsule. I'm not missing much from my Linksys but one of the things I miss is being able to open up a browser from any network connection and being able to connect into my router. Is there a way with the Time Capsule / Airport Extreme to be able to access the configuration settings when not on the local network? Such a when I am at work I want to be able to access the configurations page.