Alright so I bought a copy of Aperture 3 and just upgraded from Aperture 2 once I installed it, it had to convert my older library into Aperture 3 format it said it would take overnight so I came back in the morning to see a massage saying something like " your startup disk is full please close other applications for more memory " which was really strange because my Aperture library is not even on my start disk and I had 60gb's left on my startup when I went to bed. not to mention the computer was the slowest I had ever seen it. could this be because it ran out of ram and started using the startup as virtual memory? and if so why did it use 60gb/s of storage and still not have enough? this is a huge problem apple needs to fix it seems to do this as soon as I start up Aperture every time.
I'm curious if anyone has experienced a memory leak in Mail?
I leave it open all the time so it will check my e-mail constantly over my IMAP accounts. My computer was last restarted--so so was mail, earlier in the day. I opened up activity monitor and saw it hogging an insane 300 mb of RAM. After I closed the program and restarted it, it is down to using a much more reasonable 32 mb.
I've kept my Mac on for days in order to test out these memory leaks that Safari, iTunes, etc supposedly have.
Safari is now using 1.01 GB of memory. And that's not from having 100 windows open or anything. I usulaly have a few windows open with a few tabs each most of the time. But it's just the size to which Safari has grown. It started out much less. Under 100mb I think.
iTunes is up to 280mb from 50mb and I believe it was even higher earlier in the day somewhere in the 330mb range.
I have 4 gigs of RAm on my aluminum iMac, but now I have only 58mb of free memory left!!!
When memory runs out what will be the result? Is Safari just using a gig of memory because it can??? Will this slowdown my system? Or will Safari and/or iTunes give up memory starting with the oldest data first? Am I reinventing the wheel here? What will this test or observation prove?
I upgraded my system to Safari 5 from the file. I was not connected to the Internet at this point but decided to check the new browser, and was surprised to see how fast Safari occupied all available memory. The system was very irresponsive. Closing Safari solved the problem. This problem can easily be repeated. Can somebody confirm this? I have SL on MBP.
My dad has a new 27" Core i5 iMac. When he plays a very long slideshow, iPhoto consistently crashes around the 8-minute mark. Sometimes he gets an error message saying "iPhoto unexpectedly quit" and sometimes the slides just quit coming up, even though the music keeps playing.
It doesn't matter from which event the slides come, although it seems to happen on his pics only and not on the pre-installed pics from Apple.
One last data point, this never happens, even when viewing the same slideshow, on his 13" MacBook Pro, which he bought at the same time.
It seems to me like a memory leak, or, less likely, some kind of GPU overheating issue. He's tried rebuilding his photo library, which changed nothing.
I bought my Macbook Pro 17", Intel 3.06 GHz, 4 GB RAM a few days ago. However, I seem to keep experiencing this System memory issue. Right after I start the Mac OS, I got around 3 GB of System Memory free (which is still a bit weird, is the Mac OS by itself requiring a whole GB of RAM?), but the more I use my system, the less RAM becomes available. This is normal, but I would expect the memory to return once the applications are closed.
However, after working with different applications, especially vmware-fusion, and Logic Pro, although I close the applications, only very little System Memory returns. I have attached a screen shot of the system, including the Activity Monitor window. As you can see, with only Safari and Finder opened, I only got less than 700 MB of memory free, out of the 4 GB I have. I believe this might be what is called a "memory leak". Is there any way to sort it out, without having to reboot my system each time I need memory? Here's the screenshot: [URL]
I have an issue with my MBP. I have 4GB ram, and recently, AddressBookSync think it should just fill up that entire memory with ... nothing, I guess! I used the search function here, as well as on google, and those few instances I could find were either not answered, too old or relevant to other application problems.
This is a screenshot from Activity Monitor. I can kill it, but at next sync, it will just start over. As it fills the memory, most other functions slowly come to a halt, or at least, runs very slowly - even copying files, or just hovering the mouse over the dock, to reveal the icons!
I did a resync of Mobile Me as suggested elsewhere, but it did not solve it.
If you want to find out for yourself if you have a similar problem, I can recommend the widget iStat Pro. From that, you can see current memory and CPU loads (and much more also), and launch Activity Monitor from there. You can also launch Activity Monitor directly from Spotlight for instance.
After upgrade to lion 10.7.3 and Xcode 4.3.1, four processes, include systemUIevent,uiagent,kernel... Continue eat the memory, Soon the system is out of memory.
I have a brand new iMac, that often displays an error stating the mac is out of memory. The mac has 16GB of memory and usually the only software used is Office products and Safari. I noticed that the machine would run out of memory when the mac is doing its index. I can usully see this happening in the spotlight. Below is a screen shot of the activity monitor.Â
Mac specs: Mac OS X 10.9.3Intel Core i716GB RAM1TB Hard Drive
Anyone else having issues with iTunes 10.6.3 running on OSX 10.7.4 leaking memory dry and then filling up ALL your disk partition? I do - once a week now. I have a small boot SSD, but once iTunes fills up the memory it appears to be creating a 30+ GB swap on the boot drive and just kills my machine. I watched the apps closely this week, and iTunes had built itself a nice little slice of 4.5+GB of memory. I have 12GB of memory. Machine was starting to lock up right before my eyes. Force quitting iTunes saved the day. What in the world? I do connect my Apple TV to my library.
I'm trying out Aperture 2 for the first time, I always used Iphoto. I have imported my large library into Aperture. Activity Monitor says that Aperture takes up 1.3 gb of memory when being used and 600 mb when It's not being using it.
Is it normal for Aperture 2 to being using this much memory? Iphoto uses 350 mb of memory. My 2.66 Ghz Quad Core has 6 gig's of memory. I run aperture alongside Iphoto, Firefox, Itunes, New York Times reader, Rhapsody's flash player, etc.
Well not so much a leak but since upgrading to Snow Leopard I've noticed that over time, a big chunk of my RAM is being siphoned off into a process called OSMServer. Does anyone know what it does and why? And more importantly how to stop it doing it? It's currently using over 1GB of my 4GB RAM and making the machine run like treacle.
The only way to clear it seems to be a full shut down and restart. Which is fine for a while until it fires back up and starts gobbling RAM again.
I have a year old MacBook Pro with an Nvidea GeForce 8600M GT card.
I recently bought Unity but it turns out the Nvidea GeForce 8600M GT graphics card isn't fully supported because of a memory leak which is a problem with the drivers. Unity Support have told me to update my drivers. I understood Mac drivers were always built in to the OS and no drivers were available from Nvidea but I see they now have one Mac driver for another card.
What is the actual state of affairs with this graphics card does anyone know? There have been a lot of reports of faulty ones and now this.
This is a just about year old top of the range MacBook Pro and it doesn't support graphics??
Recently Aperture has a problem reading all the photos on my 4GB Sandisk memory cards (2 cards, same problem).
When importing pictures from Aperture (RAW) - it only reads about 10 pictures, displays the thumbnail and then stops reading from the card (when there is still hundreds more pictures to be imported).
What I have to do is import with iPhoto and then drag them into Aperture. This is a pain though. I happens on both my memory cards and is a recent thing. It used to work.
iPhoto reads the memory cards in the camera very quickly, but Aperture consistently fails on more than one memory card which leads me to exclude the cards as the point of failure.
My Mail app is leaking memory at the rate of about 0.8Mb per second. If I leave it running it hogs all my RAM, starts using gigabytes of virtual RAM, slows my system to a crawl and then crashes. I have to open the app to check my mail, and then close it again - which is really irritating. It started after a recent Safari update.
I have SpamSieve on my machine, but the leak still happens when it's disabled. Similarly, I have a MobileMe email account - but it stil leaks when I disable this account. I'm running a MacBook 3.1
As always I wanted to add a new project with incrementally new RAW files from my SD memory card. I have the photo management system the image master files (RAWS) are stored in Pictures folder on the HDD. The import dialogue enables to select a destination folder to Pictures as usual, but it doesn't show Move or Copy files option anymore. Without this, it just imports images as referenced images to the ones placed on the memory card, which I subsequently can't format, because, I'd lost all the photos. Move or Copy files option shows up when I pick other import source than memory card, eg. my HDD. I tried everything, can't figure this out. I find Aperture unreliable now and will move to Adobe Lightroom, if won't find a solution.
Info: Mid-2009 Macbook Pro running Mavericks 10.9.3, Aperture 3.5.1
I noticed that Aperture 3 is priced really, REALLY low on the Mac App Store. So I made the decision to buy it. But... I already have Aperture 2 installed. So what happens when I buy Aperture 3? Does it recognize that I have Aperture 2 installed, and upgrade it, or will it install Aperture 3 alongside Aperture 2?
I just notice on the left side of my MBA, there is an approximately 1" light leak in a dark room. You can see in the pic what it looks like... Now, I'm not an exchanger, or returner, but to me, this seems out of sorts...
Have another thread on the go regarding fluid leaking from my white MacBook. Exploring avenues outside of the mac itself now. Apple want it taken to the an apple store for immediate inspection but warned I could end up being charged for repairs due to accidental liquid damage, although I didn't damage the machine. No liquid was place around or near the machine. This was a chemical liquid. could the solid state drive installed in the machine have leaked and caused this problem? If its still under warranty and has damaged my whole computer could they be liable to repair or replace this machine? All answer gratefully received.
What in the world is Apple doing lately? One ****** up after another... Aperture 3.1 won't open. It crashes every single time. I repaired the permissions, deletede the preferences and nothing!
After running the latest release of updates today (ilife, raw camera, etc.) Aperture 2.2.1 (whatever the latest release) no longer sees all of my photos - about half of my projects are missing from the Aperture program itself, however they are still in the library as I can get to them in finder.
I've downloaded the trials of Aperture and Lightroom and have them both installed. I'm playing around with them trying to figure out which one will be best for me. I'm not a pro photographer or anything, but I don't like iPhoto because of the way it deals with events. I like to have hierarchies for my picture folders but apparently iPhoto will only allow you to have one level of events.
So, I understand that Aperture has you choose between the masters being managed in the Aperture library file or have them be referenced on disk. My main concern is that I want to be able to pull all of my master files out of Aperture and preserve my old folder hierarchy structure. Every time I try to export files (even from multiple folders), Aperture exports them all into one huge folder rather than preserving the folder structure. Is there any way to do this?
I just purchased my first DSLR camera, a Canon 550D with a 18-55 IS and a 70-200 F4 IS USM. I bought Aperture to manage those pictures, and was wondering what to do with iPhoto.
Currently, I use iPhoto for all my photos, and have a sync with my iPhone.
I would like to know how you use Aperture and iPhoto on the same computer.
- should I put everything on Aperture, what would I lose if I do that ?
- should I keep iPhoto for my casual pictures (taken with my Panasonic FX-55), and Aperture for the photos taken with my DSLR camera ?
- if I import the iPhoto pics into Aperture, what should I copy them all on Aperture, should I just use the iPhoto database, or should I delete the iPhoto database after I import everything on Aperture ?
