I know it may sounds stupid to ask, I am thinking of partitioning my 500GB hard disk to 200GB and 300GB, with the 300GB holding the OS. Is it a good idea? Have anyone done it before? Any unwanted effects?
View 9 RepliesI have the Seagate Momentus XT and I have a quick question. If I reformat the Hard Drive portion does that erase the SSD side as well? If not how do I erase the SSD side of it.
View 1 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I am trying to partition my current HardDrive so I can run a Macintosh on half of it. The other half will of coarse be windows. I've tried programs like BasiliskII and SoftMac, neither work.
I grabbed some spare 10.4 disks I had, and my computer refused to read them. So I got my hands on a different set of 10.4 install disks and my computer still refused to read them.
I am trying to do this because it's a project for my Computer Hardware class. I've spent way too much time on this without any progress.
I have a Mac mini with a 55 G internal hard drive with a 750 G One Touch Maxtor drive (actually just 698 G) attached via firewire. Later this month I'll be upgrading from Tiger to Leopard, and I'm assuming a clean install makes most sense. I'd like to partition the Maxtor drive to provide general storage as well as Time Machine backups. Although it's not vitally important, I could envision having a partition to handle Windows. Should I create three partitions: one for approx 55 G to handle the current contents of my internal drive for the upgrade; one for approx ?? G to handle potential Windows; and the remaining space to handle Time Machine.
- How large should a Windows partition be? There are some apps that would be useful to have, but highly unlikely it will be an important part of my routine. Should I be stingy? Can I get a Windows install in about 10 G? 20 G?
- Can I partition the Maxtor while it has data? Currently there is about 25 G of files. Many are expendable.
- Disk Utility seems to default to PPC settings, though the mini has an Intel processor. I'll want a GUID Partition Table for at least one partition, correct?
- Does it make sense to install Leopard on an external partition in case the internal drive ever fails? Or is that a waste of space for now? (One assumes I'd be able to rescue the machine via the install disks.)
- I suppose everyone's experience with Time Machine is different based on how they use their computers, but is there a rough guideline on how much space to devote to Time Machine?
My intention is to partition an external HD in half allowing it to serve as a backup for a pc running windows xp, and the other half as a backup for a mac(10.5. I am using a Seagate external HD(new) that was initially partitioned on a windows xp computer.
The 1st half of the 1TB HD was formatted in NTFS format, and the second half was erased and (I thought) reformatted in HFS plus but when I attempt to use CCC(Carbon Copy) to copy the mac 1/2 of the hard drive, I get this message:
"You may have difficulty booting from this target volume, the underlying disk is not formatted with a partitioning scheme that Apple recommends for Intel Macs."
I have read the recommendations that the external HD need to be partitioned with APM or GPT, but I cannot seem to get to that option now for the mac side of the external HD.
In the Disk Utility, the external HD shows both sections of the partitioned drive(the xp section and the leopard). I do not want to reformat the entire drive(both sections) if at all possible.
I just want the Mac side of the ext drive to be properly prepared for CCC, and the windows side to remain as is.
I want to partition my hard drive so I can run BootCamp, and my PowerBook is giving me the following message: The Disk Cannot be Partitioned because Some Files Cannot be Moved. So I'm assuming I need to format the whole thing and then partition with BootCamp. Totally open to other ideas, but, assuming I move forward with that, is the best was to save user settings, current Applications, data stored on the drive, etc. to create a disk image on an external drive? I've done that, but I'm sort of unclear on what I do with the disk image after I've wiped the drive and partitioned it up.
View 4 Replies View RelatedOn my Mac Pro I don't know how to delete a partition and make a new one on a hard disk.I used disc utility to initialize the partition, but it doesn't show any chance to delete or change the partition i created
Info:
Mac Pro, Mac OS X (10.6.8)
I'm looking for a comparison between all iMac processors. I believe that the only processors used for iMacs have been G5, Core Solo, Core duo, Core 2 Duo, Core i5 and Core i7. If I'm missing something let me know.
View 2 Replies View RelatedI was making a partition on my USB external drive in order to put a disk image of Snow Leopard on it, so I could boot off of it.
I added a 10GB partition to the drive, and clicked Apply. The following dialogue box came up:
Partitioning this disk will change some of the volumes. No volumes will be erased.
This volume will be added:
"Snow Leopard"
This volume will be resized:
"XXX HDD"
I clicked Partition, and it finished very quickly. I checked Finder, and the entire drive, BOTH partitions are completely empty.
I would never opened a topic like this if I had not a similar experience with expanding 'dmg' in the past!
A truly bad experience! It is supposed that using 'disk utility' I can resize-expand-make bigger any dmg file. Every time I tried it, it was a totally fail process.The 'disk image' dmg did not resized at all.
I do not know why, it just happened to me many times.
Does anyone had similar experience? Any solution to this? So if I have a dmg that need to be bigger, I create a new one from scratch and I copy paste files from the old dmg.I need to do the same with hard disk partitions, using disk utility once again. I need to resize my hard disk partitions.Does this process works well as it should be, or it is a bad-implemented feature?
I have partitioned my external Hard drive into three different partitions, each of different formats. Two partitions for backing up my macbooks and one to copy to and from my windows PC. I would just like to know if in any way is it possible for me to be able to re-partition one of the partitions, without affecting my Time machine partitions, in case the need be in future.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Supposedly, the new 27" iMac supports 2 side-by-side safari windows perfectly. However, on mine, they overlap by about 3 inches and if I drag the 2nd window to the right, it does not entirely fit without adjusting the width of one or both windows.
Is there a way I can optimize Safari (or the iMac display settings) for the 27" iMac display so that by default each window takes up exactly 50% of the screen width and a new window will sit perfectly side by side?
how do i partition my mac hard drive if my startup disk is full and i have more space
View 1 Replies View RelatedWhen I try to partition my hard disk, Disk Utility tells me that the file system cannot be read.
View 3 Replies View RelatedI've been running a Toshiba 1TB external drive on my Mac Pro tower and it's been working fine. But yesterday it wouldn't mount. I could see the drive in Disc Utility, but the partition wouldn't mount. I brought it into work where I'm running an iMac and it mounted just fine. Why would it stop working on one computer (where it was previously fine) yet work okay on another? And how do I get it working on the tower?
Info:
Mac Pro, iOS 7.1.2
I have an external 750GB hard drive that I previously formatted as FAT 32 because I wanted to be able to plug it into Windows computers as well. I was not very thoughtful at the beginning and I just created one big 750GB partition. I currently have 450GB used and about 300GB free.
I would like to create a new partition in the free space without losing the data I have in the disk, and format the new partition as Mac OS Extended to use it for Time Machine backups. Presumably Disk Utility can do it, but when I go to the "Partition" tab it says "This partition cannot be modified" and the "+" sign below it is grayed.
Ok so here it goes.
The situation I'm in is pretty akward and it's quite a long story but I'll try my best to explain everything.This afternoon I went to a friend's house to transfer some data to my external hard drive (MyBook Studio).Since my HD is formatted as HFS+ and my mate owns a Windows PC, I'd asked him to install MacDrive.
When we plugged in my HD, Windows just didn't detect it. We tried all sorts of things, including rebooting.. but nothing seemed to help. No matter what we did. The damn thing just didn't detect my hard drive. Not even with MacDrive.
I desperately wanted to transfer some data to my HD since I'd drove quite a while to get there. So after a bit of Google research we decided to create a partition. My HD has a capacity of 1 TB and only about half of it was being used.So we went on and created a NTFS partition of 400 GB. Now Windows could detect the partition we'd just made.
Everything went fine, we could now transfer some data to my HD.Nevertheless.. when I got home and connected my HD to my Macbook Pro, Finder could only see the partition which we formatted as NTFS. The other 600 GB, which we hadn't touched.. is nowhere to be found.
There's quite a lot of important data on there so I would really appreciate it if anyone could help me.
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies View RelatedI have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
How can i modify(delete,paste) the contents on the external hard disk that has an NTFS partition?
Info:
MacBook
Pro, Mac OS X (10.7.3)
Disk Utility Crashed whilst creating a Partition, and I now have ~100GB missing, which was the amount I had allocated to the new partition.
The new partition didn't get created, and I now have 100GB missing from the Hard drive. I have a 1TB hard drive, and when I go to Disk Utility, it says: Capacity : 999.35 GB (999,345,127,424 Bytes)Available : 586.1 GB (586,103,844,864 Bytes)Used : 310.52 GB (310,524,317,696 Bytes)
Which adds up to about ~900GB.
I tried Repairing Disk in Disk Utility, booting into Recovery Mode and Repairing Disk there, but neither made a difference.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.3)
I tam trying to add a 75 GB partition to my aluminum iMac's internal HD using Leopard's Disk Utility, but after 7 hours the striped bar appears not to have made any progress and still says "Modifying Partition Map". How long does this usually take? Is this normal?
View 16 Replies View RelatedMy old MBP has a 320gb HD, my new iMac has a 500gb HD. What I am thinking is to create a partition on my new HD for 320gb and leave the remainder 180gb alone. Can I do this and is it possible? My new iMac has snow leopard and my old MBP is running leopard. Will this cause problems?
View 9 Replies View RelatedSo I'm using bootcamp to load up windows, but now I have run out of room on my Mac partition. I still have 30GB on my windows partition, and I haven't even used it ONCE! Honestly at this point I don't think I will ever need it....
But so my questions is, would there be any way to remove the windows partition completely without damaging my Mac side to allow for more storage? Or maybe just shrink the windows partition so that I can free up an extra 20GB or so?
I'm having problems installing OS 10.6 on my iMac. I had to replace my hard drive with a new 1TB drive and in trying to install the OS I get a message saying I need to use Disk Utility to repartition the hard drive using GUID Partition Table but I don't see any such option in the Disk Utility menu!
View 2 Replies View Relatedso I got OS X Leopard. I had a copy of Windows Vista, and decided to try out the Boot Camp Assistant. Didn't have a problem partitioning the drives and installing Windows. However, I now find it entirely pointless to have Windows on my Mac being that I have a PC now. I tried doing it myself at first, and ended up erasing the Windows partition, and now I'm having troubles combining the drives into one. I saw something about running an uninstaller through the Boot Camp Assistant, but I think erasing the Windows partition ruined that for me. Whenever I try to use the BCA while the drive is mounted I get this error message: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. When I unmount the Windows partition, I get THIS error message: Boot Camp Assistant cannot be used. This startup disk is not supported.
View 2 Replies View RelatedSo I tried to partition my 1TB Seagate main hard drive that's in my iMac, and twice my iMac locked up at the "Shrinking volume" stage. I tried to shrink it down from 1TB to 600GB and it not only did not work, my system locked up (I gave it plenty of time) to the point where I had to forcibly shut it down and a subsequent verification of the disk revealed that it needed to be repaired using Disk Utility after restarting and booting from my OS X installation disk, which worked just fine.
I decided to try again, because the first time, I had not restarted the computer in a while, so I thought I'd "flush out" any temporary files, cache, inactive RAM, and whatever else might have been in the way the first time around. However, this time, the screen simply turned off after 15 or so minutes. Once again, it got stuck at the "Shrinking volume" point and there was also no way to revive it except for a forced shutdown, which, by the way, I did by holding down the power button on the back of the iMac. Same story, I had to restart and repair the disk using my OS X installation disk, which resolved the repair issue.
One more thing. I remember that when I first received my iMac, I was able to partition the drive in order to add a volume for Boot Camp, which I formatted in NTFS right before my Windows 7 installation. All of that worked great and I was actually impressed with how flawless that whole process executed. Eventually, I decided that I no longer needed Windows 7, so I erased the partition and re-consolidated it with the main OS X partition, again, without any problems.
With all of that said, I'm not sure what to try next, but I would really like to create 2 additional volumes. I thought I would try using Disk Utility again, but this time, booting from my OS X installation disk. Then again I didn't want to chance it again, as I have not made any backups yet. I'm in the process of making a backup right now.
So what do you guys think? Should I try to do just that, using Disk Utility after booting into the installation disk? What do you guys think is the reason as to why I can't just resize and partition using Disk Utility after a regular boot-up like I was able to before? What else could I try? Any third-party software titles like I used in Windows? Acronis and Partition Manager come to mind. I'd rather do it in OS X, though.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
