Windows On Mac :: WinXP OS Not Installing With Parallels5
Jul 16, 2010
I recently bought an iMac, and have just successfully installed the trial version of Parallels5. I have my Windows XP product key from the Dell PC on which WinXP was installed circa 5-6 years ago. It seems to work fine, as the little Windows XP Virtual Machine box shows up all right. No mention of the key being invalid or out of date. However, when I try to activate WinXP I continually get the message that no operating system has been installed. Even though I went through the steps in the instruction document, both by inserting the XP Service Pack 3 DVD or trying the networking option.
Several attempts to get XP running have failed. Wondering whether I should uninstall P5 (and whatever WinXP data might be lurking) and reinstall everything (including another attempt at WinXP), or is it a bitter fact that I'd need a new copy of WinXP in order to work with Parallels5 on my iMac? (I mainly want to be able to work with Band-in-a-Box, which I bought last year for use on my PC.)
The only copy of windows XP i have is pre SP2. I tried to install this last night via boot camp, but after spending hours installing and loading the drivers from the mac disc, not all were installed. Then I was hardwired to my router to run windows update to get SP2/SP3 I could not for the life of me get the 3 drivers to install.
Ethernet controller, although the ethernet port worked. Bluetooth driver, cannot find the driver on the Mac disc VGA driver, cannot find the driver on the Mac disc
I also don't seem to have a wireless connection or even an option to use my wifi card on my macbook with windows.
when i was installing xp with bootcamp the computer restarted (after i chose my paition and copy some files) then i eject the disc, however it cannot boot from the partially installed disk.. it said disk error, please press any key to restart
Yesterday I had no problem using IE within Parallels. Now, I can't access the Net no matter what I do. IE isn't working, I can't sync Outlook and some other programs are giving me Time Out errors because they can't connect. To correct, I've tried changing from NAT to Bridge and Host, no dice. I've tried restarting the Windows OS. I've tried closing and reopening the VM. I've tried turning off an on the Airport connection within MacOS. As a side note, I have no problems accessing the web on the Mac side.
I was wondering if anyone knew how to make a WinXp installtion cd on a macbook. The family computer is a PC and it wont boot up and we cannot find the installation disc. I know I can download it of the windows website but its a .exe file.
I was wondering if there was anyway to download it onto a macbook (only other working computer in the house), and save it onto a Cd Rom to then use to start up the PC?
Background: On several occasions, now, I've installed and reinstalled (completely cleaned off) Safari on my (1) Toshiba A505-S6017 (laptop - 8GB RAM) -- running Windows 7-64 and (2) on my Gateway desktop (7GB paging file) -- running Windows XP I've rebooted after every reinstall. From what I hear, it's a wonderful addition to my browser suite -- all my other browsers continue to work fine: Chrome, Firefox, Opera.
A. PROBLEM: Each time I try to use this reputable program (version 5.2 (7534.52.7), I encountered the following problem: Program (1) loads instantly, (2) presents the browser space, (3) agrees to open new tabs, (4) but when I try to direct it to ANY URL at all, the hour-glass appears, but the wait is fruitness. I cannot reach any site at all. I've tried to access the program, both as "administrator" and regular "user." No joy. All I ever get showing is the interesting interface (and an hour-glass on an URL-call) and nothing else.
B. ALSO: I have also noticed something I'm not sure is normal or not: ln my file-directory, I only see the program icon for Safari, but NO file directory or ancillary files -- is this normal?
Does anyone have any help to offer an intensely motivated future user? P.S. If I eventually get through this problem on my own, I'll return here and tell what I did -- but I'm starting to doubt my abilities .
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done; 1.Open up bootcamp assistant 2.Partition, divide equally(116GB each) 3.Insert Vista disk and start installation 4.Install Vista and insert CD key 5.custom installation 6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I am trying to install Windows 7 on my 24" iMac. But the DVD drive it playing up and is not accepting the CD. I am wondering if there was a way I could use my Macbook to install it over Firewire or something similar ? Even USB ?
I just installed Windows 98 SE in the VMWare Fusion Beta (latest update), and it seems to work very well, except the fact, that whenever I ask it to install the tools, no setup windows pops up, as it says there will in the help file. I also tried Google, but noone else seems to have the same problem.
It really is a big problem, as I can't have a resolution above 640x480 and more than 16 colors, which prevents me from running my retro games like RCT and Theme Hospital.
I'm trying to install the 168.81 ForceWare drivers for my 9600M GT (256MB) in Windows 7 x64. The drivers from Boot Camp on the Snow Leopard DVD installed fine. I want 168.81 because I always like to have the latest drivers for everything.
Anyway, when installing it, it says something about not having the required hardware and it won't install.
Is the Boot Camp drivers the only way of having the latest drivers.
I'm having some huge problems. I have an .iso of Windows 7 Ultimate but my whole problem is that my macbooks dvd-rom drive crapped out on me a year ago so no burning no reading and Disc Utility wont let me restore the iso onto an external hard drive.
Does anyone have any idea what I could do to fix this? Is there a way I can put the image onto the hard drive at all?
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
My first Apple, an iMac, should be arriving in the mail any day now. In anticipation I'm wondering, among many other things, how you can transfer all the tabs that you have in Firefox from a Windows XP PC to Firefox in Snow Leopard?
i installed my winxp license in bootcamp then i valited. but whenever i open it in vm ware then i have to validate again because it says hardware have been changed, then if i want to boot into bootcamp to play some game like burnout paradise it says i have to validate again, so here i am, installed a cracked windows xp so i doesn't have to valited. still not doing anything ilegal since i have a legal license. is there any solution for using the license key avoiding that little problem?
I installed the HP driver on my Mac by temporarily connecting it via USB port. No problem. The printer is normally attached to an XP machine. Mac can see the printer on the Windows Network, but the HP driver install disk does not. I can't seem to locate the P1006 on the Mac hard disk, and it does not show up on the driver list in printer setup.
I'm purchasing one of those handy eSATA external docking stations so I can access data on old Windows drives. I'm concerned about not corrupting data from the drives and wonder if there is a risk of OSX writing to them. Do I need to mount the drive manually from the terminal command line to insure they mount as read-only or is it safe just to browse the drive?
I guess I need to learn about imaging alternative OS drives now that I am using a Mac all the time. I've seen the "dd" format laid out elsewhere and never bothered to read up on how it is used. I would guess this will create an image, similiar to an ISO on my Mac desktop.
So I backed up my Opera Bookmarks rigorously in case the Mac died. Well it died. And since I'm using a WinXP machine for the time being I'd like to bring those bookmarks over to the PC. The problem is they are in a .hqx format and I don't know how to extrat it. I tried WinRAR and 7zip without success. Of course I realize now I should have saved them as a HTML file... Then I think I could have brought them over with no issues. Please confirm if possible. And if you have any ideas (both my Macs are dead for the time being) on the bookmark thing, please let me know. All the other files are ok - text files have some glitches but most are fine. The ones with glitches have to be resaved in RTF format. If course the least important (.avi) play perfectly!
I bought a MacBook this week for the purpose of running Windows XP off a partition. I ran the Boot Camp Assistant, partitioning 15 gig of my 160 gig hard drive for the Windows OS. Boot Camp prompted me to insert the Windows XP Pro with Service Pack 3 installation disc I'm using, so I did. I followed the Boot Camp instructions exactly, and the installation seemed to be on its merry way ... until the screen indicated there were 33 minutes left.
With 33 minutes to go, the screen seemed to freeze (except that I could move the cursor/mouse) but the installation never advanced. I waited about an hour and it was the same, so I held the power button down and restarted the computer. It booted in Windows and tried to resume installation with 39 minutes to go. When it got to 33, it hung again. I've noticed other people having problems with this, but no solutions. Any ideas, folks? I want to be able to boot into Windows XP, not use Parallels or any other program.
Before you ask, I had found some old games a few months ago that I wanted to play for nostalgia sake, so I made some Windows 95 and 98 virtual machines. It was pretty easy actually, since I just used Disk Utility to create images of the install discs. VMWare had a nice guide on their site that helped me get networking setup properly also.
But then I got to thinking, it'd be pretty fun to try and get Windows 3.1 up and running as well. I was able to make images of some MS-DOS 6.22 install disks and got that installed just fine. My problem actually comes when trying to install Windows itself. I was able to get the install files from 2 different sources. The first was just a folder of ALL the install files from 6 different disks, and the second was 7 different ZIP files from 7 different disks. I tried creating a single image from the first source, and 7 different images from the 7 unzipped folders from the second source, but on both attempts I'm unable to access the A: drive in DOS to start the setup. It gives me an error message about reading from the drive, followed by the standard "Abort, Retry, Fail?"
Has anybody else tried to get a Windows 3.1 virtual machine up and running and come across this problem? I even tried Googling for the exact lists of files contained on the 6 disks from my first source in order to try and split those up and make the necessary images, but unsuccessfully.
i downloaded and burned a win 7 .iso to a bootable dvd. I went through the Bootcamp assistant. When i went to install win 7, it restarted, i get grey screen for a few sec, then blank screen, then a black screen with grey DOS text saying this:
1. 2. Select CD-ROM Boot Type: _
Pressing 1 or 2 does nothing or any other key on my keyboard for that matter. im just stuck in this mode and cannot proceed, i just have to shut down and boot back to OS X.
