I'm trying to use Time Machine to backup 44G used to an External Hard Drive with 76.5G available. The backup process always fails. I thought I might have to use Disk Utility to "zero" out data on the external hard drive but the message pops up with an estimated 24 hours to "zero" out all data on the external Hard drive. I have an iMac G5 with 10.5.8
View 4 Repliesi checked disk utility and no errors. the external is not full.
Info:
Imac 24, Mac OS X (10.5.8), Wacom Tablet , Lacie 2T HD, Lacie 500gHD
I've bought a 1 TB iomega ego mac edition II external fire wire drive. Once connected it asked whether i want to create a password and whether i want my data encrypted, to which i answered yes. Then a time machine backup started and failed after backing up 5.25 GB out of 39 GB of my data with the following error: "The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup". When i look at time machine it shows there is 994.29 GB available on iomega ego drive. The drive then went into: "Encrypting Backup Disk" message and it takes forever.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
So I did a search here and found various Time Machine issues, but not this one inparticular. Yesterday time machine was running and I got the following error:
"Time Machine hasn't backed up your computer in 116 days..."
I go to the Time Machine preferences and I click the little info "i" next to the "Failed" status, and it says "Back up is too large for disk...requires 21.92 GB, but only 21.85 are available."
I have a 500GB FW400 hard disk as my Time Machine, and I've never seen this error before. I figured since TM deleted old backups when the disk got glose to full, that this issue shouldn't happen. I just tried to run a back up again and I got the same errors. It gets to the "cleaning up" stage of the back up, then craps out.
I'm backing up my HD to a new external hard drive using time machine for the first time. It is going painfully slow. Does anyone know how I can speed it up?
View 10 Replies View RelatedSo I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry
2. No matter how many times I reformat it, it always fails
3. I tried one trick I googled - deleting the "inprogress" file - does NOT help
4. SMART status is verified
5. There are no problems if I verify/repair the disk.
I recently got a new MacBook (upgrading to 7.2 with lion) and put all my old data on it using a time machine backup from an external hard drive. Now, when I try to create a backup on time machine to the same external device I get an error message that says I don't have enough free space on the drive to complete the back-up. I've deleted some of the oldest back-ups from the external drive, but time machine doesn't seem to notice the newly available space.
Is the first backup on the new computer larger then normal? It says it requires 215gb but the external drive is 250gb so clearly I haven't needed that much space in the past as there are numerous back-ups from my old Macbook on this drive.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.2)
I had a system instability issue and needed to restore my system from a Time Machine backup.Â
I tired restoring from several backups of different dates, with OS X Version labeled 10.7.3 (11D50b). I did so by booting into Lion Recovery HD and following the menu. However, once the recovery finishes copying files to the boot HD and reboots, the computer got stuch forever on the screen with Apple logo with the spinning wheel.Â
Luckily my backup still contained a backup from about two months ago with a different OS X Version, labeled 10.7.2 (11C74). Restoring from this backup completed successfully.Â
At least I did not have to build the sytem from stratch, but I wonder why restoring the system from the latest backup did not work.
OK my Time Machine backup was working fine as of May 22. But then I was diagnosing some system-related problems and I wanted to find out if certain error messages in the console were being caused by Time Machine. So I toggled it "Off" in the System Preferences. But it did not stop the errors.While it was off, I ran some system maintainance utilities that clean out your caches, repair permissions on the home directory, etc. That seemed to stop the most of the error messages I was getting.
So then I toggled Time Machine to "On" in its System Preferences. It shows my "Latest Backup" as having been May 22. However it won't backup the computer, because it throws this error:
"This backup is too large for the backup disk. The backup requires 1.77 TB but only 703.30 GB are available.
Time Machine needs work space on the backup disk, in addition to the space required to store backups. Open Time Machine preferences to select a larger backup disk or make the backup smaller by excluding files."even though the Time Machine drive is 4TB, and the only things on that drive are backups of the same volume that I'm trying to backup now!
[code]...
Info:Mac Pro, Mac OS X (10.7.4), '09, 8x2.26, 285GTX, 12GB RAM, 10TB
The following error message appears when I attempt backup using TM;
"You do not have appropriate access privileges to save file ".0019e33d49f6" in folder "Time Machine Backups".To view or change access privileges, select the item in Finder and choose File > Get Info."
Spotlight can't locate this file, I've ran disk utility to verify and repair the internal drive, verified the external, no problems on both counts. I even tried allowing read & write privileges temporarily to everyone on both drives, but no luck.
Just receovered from a disk crash. TM brings everything back on my new HD. The problem is that when I try to backup again, I get an error message saying to check TM's preferences. One problem may be that it seems that TM wants to back up the full HD rather than doing an incremental one.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.53 GHz, i5, 8GB, 500 GB
I recently had a external disk fail that was still under warrenty, so I dually went to the Apple store and got a replacement. After plugging it in I went into Time Machine and performed a restore (I was backing up the external disk to another external time machine managed disk). All worked perfectly so far. However, come the next backup I got "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume"
Searching the forums I don't see any obvious solution. In the system log I also see 'Event store UUIDs don't match for volume: MyBigDisk' every time there is a backup.
Info:MacBookPro, Mac OS X (10.5.8)
So I just started using Time Machine (had been using CCC). A quick scan of my backup shows that it's not backing up my Outlook email database file. This missing file is very concerning to me. First of all, this is one of my most important files, needless to say. But also, it makes me wonder, what other important files might Time Machine be deciding to skip without my knowledge. I went into my Time Machine preferences and have no exclusions in there
Info:
MacBook, Mac OS X (10.6.8)
i have a case where i have a large file (a sparse disk image) which at some point in the past seems to have become corrupt in the sense that there were problems reading it.eventually, i realized that attempts to clone the drive containing the bad file were failing (super duper reporting an error).an attempt to finder-copy the disk image also failed.i went to find backup copies of the file in question in my time machine backups and realized that the file did not exist in my backups.digging through system logs, i discovered that when time machine encountered an error when reading the file, it was failing silenty - that is, no error was reported via time machine - backups were seemingly completing successfully.so as a result, i went quite a long time with no backup of the failing file, nor any obvious warning that it was failing, even though time machine was encountering an error every time it tried to backup the file.
this seems like a major problem, perhaps even a design flaw in time machine.in fact, it is really the extreme opposite of the behavior i would consider "reasonable" for a reliable backup program.i somehow misinterpreting the data? any guess as to why time machine would not report when it tried to read a file during a backup, but failed?
Info:
Mac OS X (10.6.7)
For the past two weeks I've been having some major issues backing up my computer with Time Machine. It's become quite a process.Â
iMac 27", Mountain LionÂ
I am backing up to a brand new - well bought in February, '14 - 1TB external hard drive and there is NOTHING else in there except the TM backups.Â
For the past two weeks it's been failing the automatic backups. There is PLENTY of room on the drive.Â
The exact error message reads:"Time Machine ErrorUnable to complete backup. An error occurred while creating the backup folderLatest successful backup: [time and day entered here]"Â
To remedy this at first it was as easy as un-mounting the drive and then plugging it back in and it was fine.
Now I've got the disk utility open and constantly repairing the drive and this is only a temporary solution.Â
Below is a small sample of the report from the utility each one is dated.
How to fix this without having to purchase a new drive? In February the old external drive I had started to freak TM out and it just erased ALL my backups which I desperately needed due to the same error / failure. That drive had plenty of space as well but I lost all my stuff anyway.Â
I know the TM isn't for archiving and another question I have is, How can I transfer or even rename the backup folder that TM makes and move it to a 'free drive' to prevent overwriting? Right now I just keep buying new drives which is ridiculous.
A series of backup related problems have occurred: Upgraded to Lion and then TM failed to backup: "Error while copying to backup disk" (using Lacie d2 Quadra HD that has been performing well for 2 years). I also have a second Iomega MiniMaxHD with a carbon copy clone of my Snow Leopard mac on one partition and a second partition with other iphoto/.itunes/ document backup and now I cannot copy my iphoto library to this HD for a backup: " Operation could not be completed because the item "iphoto Library" is in use", even though all applications are off.
Tried multiple times and the transfer of the iphoto library always fails midway through. I have lost both my TM backup and my ability to backup to other drives because a new problem has arisen: every time I try to load an external HD I can't eject it: can't eject because error message says that the "Finder is using" the external HD and then I have to Force Eject, risking data loss.
I have so far tried: restart mac, reset PRAM, unplug/verify and repair disk multiple times for all of the external HDs as well as my Macintosh HD; I have erased the Lacie HD and reformatted it while rebooting from Lion Recovery HD and then TM still failed; I have also tried deleting from the Library my TM plist as well as my iphoto p.list. I even tried using a brand new Iomega Minimax HD and TM still failed
I have Lion 10.7.4, 2.66 GHz Intel Core i5, 8GB RAM
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I have a 320GB internal drive and 1TB (MyBook) external drive. I recently bought a second 1TB external drive (MyVault)to use with Time Machine. I have removed the exclusion of MyBook so that Time Machine backs it up but so far it has refused to do so. It is happily backing up the internal drive. I have looked in the Mac OSX Leopard Missing Manual but still have no clue as to what I am missing. The initial setup (and backup) did not include MyBook until I discovered that I would have to remove it from the exclusions.
View 3 Replies View RelatedSo right now I have 2 external hard drives, a 2TB MyBook Mirror edition, set at RAID 0 so its a full 2TB, and a 1TB MyBook Home Edition. I also have three LaCie 1TB drives to back up the MyBook drives.
How I back up is basically copy the contents over to the backups once a month. The problem is, using USB (my only option) takes about 24 hours per TB. Backing up 3 days a month? Not fun.
Can Time Machine do this better? I still have Tiger, so can't test it yet but it seems tedious to do things my way. I would rather be able to plug them in and sync every few weeks and not have to replace every file, just the ones that changed or were added. Can this be done?
I don't keep the drives connected 24/7 so it would have to be manual, and also can Time Machine back up a 2TB drive to 2 1TB drives? The are stuck in enclosures so i have to connect the 2 separately through USB, can't use RAID.
If Time Machine is not the answer, is there some third party program the would not require me to re-copy every file? It would be great if I could save some time doing this.
So I've run into a Mac issue I'm not sure how to handle. I've got a Mac Pro running Leopard. I've got 3 internal Harddrives: 1.) 250 GB (runs my OS and applications), 2.) 500 GB (where I store all my source files for my business), 3.) 750 GB (serves as the backup for Time Machine for all the files on Harddrives 1 and 2.). So I began thinking the other day. What would happen if somehow all 3 harddrives were destroyed (theft, fire, power surge, flood damage, etc.)? I would lose years worth of source files from my business (graphic and web design files mostly).
So I went and bought a 1 TB external drive today. Ideally I would like to put the external drive in another location and bring it out maybe once a week to backup the 3rd harddrive from above (the one being used for Time Machine). Does anyone have any suggestions on how to backup this harddrive...some type of program that essentially acts like Time Machine? I just basically need it to mirror my Time Machine Harddrive. I found a program named Super Duper (http://www.macupdate.com/info.php/id/13803/superduper) not sure if anyone has had experience with it or not. I'm open to any suggestions on how to use the external harddrive to back up my Time Machine harddrive.
How can TM take backups of external drives that are connected?
View 2 Replies View RelatedI have a seagate 320 gb external hard drive(with usb). Currently I am using a hackintosh and I will switch to Mac in a month. In my external HDD I have 200gb of pictures-movies-tv shows-documents. It is formatted with NTFS so I use it with Macfuse and NTFS 3G. When I get a macbook pro 15" i5 with 320gb hdd I will transfer all 200gb to my MBP, format the HDD to Mac os journaled instead of ntfs and use the hard drive for time machine.
After that I will still have some space. I want to use that space for carrying around documents for example to carry my presentation with me to the school. Can I use it like that? Also computers at school uses Windows, can windows read and write Mac OS Journaled format? Additional quick question: In windows if HDD is full pc gets slower, do macs get slower when hard drive is near full?
We just came back from vacation 2 days ago; I checked time machine. It says latest backup is delayed; then latest backup failed; next backup when disk is connected. I have a WD external hard drive. I check to see that it is connected to my IMac and is plugged in for electricity. Restarted my imac - same problem. There is no lite on the WD; does it mean it died? Or what can I try? It is less than 2 yrs old.
View 2 Replies View RelatedI want to plug in my computer into my USB dock, automatically mount my external HD, have TimeMachine do its thing automatically (so far, so good), but then immediately after the backup finishes, I want the computer to automatically unmount the HD. This will allow me to close the laptop and go somewhere without having to constantly eject the HD everytime I unplug the computer.
So - what I need is a program / script / etc that will tell the computer to eject the drive as soon as TimeMachine is done backing up.
I was thinking of getting an external hard drive for use with Time Machine. On Amazon I found a Seagate 1.5 TB unit for $129. However there is a similar model "for the mac" for $192. I am wondering if the cheaper unit would work, or if the one for 50% has some indispensable feature.
View 21 Replies View Relatedi was backing up my macbook nightly up until a few months ago but then stopped.
i want to wipe the external drive im using and start all over with fresh back ups. can anyone explain to me how i can do all this? i completely cant remember how i did it first time around!
Okay I've had it with VMware Fusion 3, tried Parallels. The graphics capabilities are poor for my standard of work (we use 3DS Max and Maya for intensive modelling during studies). I know my graphics card is quite outdated (ATI X1600) but a lot of the graphics-intensive apps on the Mac side run very smooth.
So I'm going down the Boot Camp route since graphics-wise, it'll use the actual X1600 instead of some virtual one. It's telling me that I need to reformat into Mac OS Journaled or something, and some basic research tells me the only way to achieve this is a fresh install.
My question is, if I perform a Time machine backup onto my external drive, will it restore the applications/settings/files completely how they were, after I reinstall OS X?
I am using Time Machine with my external drive. And since my external hard disk does not have too much capacity, from the time machine options I excluded some folders like movies, music etc. So in time machine preferences it seems it needs 42gb for backup. And it was working like this, backing up 42gb and everyday just backing up changes like 100mb. So in hard drive more or less 50gb was used..70gb free. Until last week.
Suddenly it appeared an error like this "This backup is too large for the backup disk. The backup requires 128 GB but only 97 GB are available". I do not have any idea how this can happen since my backup size seems like 42gb still in options. How it can require 128GB suddenly? Also how can I have 97GB available? I had 70GB last week? I tried to include everything in backup options and exclude again but it does not work. Still I see there 42gb needed for backup but when I connect the drive I am still getting the same error!
I have a MacBook that I'm trying to backup because my husband wants to sell my computer and buy an iPad. I have a WD external hard drive with an iPhoto library currently on it, chronicling the first 28 months of my first child's life; needless to say it's important! The problem is that Time Machine won't back up to the external drive without erasing everything on it! Is there any way around this?
I will probably also need tips on how to put the iPhoto library (28 months to present time, about 2,200 pictures!) on my MacBook onto the hard drive (does that automatically happen upon backup?). Obviously I've done it once, because there is a library currently on the hard drive, but I can't remember how I did it.
