So I did a search here and found various Time Machine issues, but not this one inparticular. Yesterday time machine was running and I got the following error:
"Time Machine hasn't backed up your computer in 116 days..."
I go to the Time Machine preferences and I click the little info "i" next to the "Failed" status, and it says "Back up is too large for disk...requires 21.92 GB, but only 21.85 are available."
I have a 500GB FW400 hard disk as my Time Machine, and I've never seen this error before. I figured since TM deleted old backups when the disk got glose to full, that this issue shouldn't happen. I just tried to run a back up again and I got the same errors. It gets to the "cleaning up" stage of the back up, then craps out.
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry 2. No matter how many times I reformat it, it always fails 3. I tried one trick I googled - deleting the "inprogress" file - does NOT help 4. SMART status is verified 5. There are no problems if I verify/repair the disk.
I recently got a new MacBook (upgrading to 7.2 with lion) and put all my old data on it using a time machine backup from an external hard drive. Now, when I try to create a backup on time machine to the same external device I get an error message that says I don't have enough free space on the drive to complete the back-up. I've deleted some of the oldest back-ups from the external drive, but time machine doesn't seem to notice the newly available space.
Is the first backup on the new computer larger then normal? It says it requires 215gb but the external drive is 250gb so clearly I haven't needed that much space in the past as there are numerous back-ups from my old Macbook on this drive.
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.2)
I had a system instability issue and needed to restore my system from a Time Machine backup.Â
I tired restoring from several backups of different dates, with OS X Version labeled 10.7.3 (11D50b). I did so by booting into Lion Recovery HD and following the menu. However, once the recovery finishes copying files to the boot HD and reboots, the computer got stuch forever on the screen with Apple logo with the spinning wheel.Â
Luckily my backup still contained a backup from about two months ago with a different OS X Version, labeled 10.7.2 (11C74). Restoring from this backup completed successfully.Â
At least I did not have to build the sytem from stratch, but I wonder why restoring the system from the latest backup did not work.
OK my Time Machine backup was working fine as of May 22. But then I was diagnosing some system-related problems and I wanted to find out if certain error messages in the console were being caused by Time Machine. So I toggled it "Off" in the System Preferences. But it did not stop the errors.While it was off, I ran some system maintainance utilities that clean out your caches, repair permissions on the home directory, etc. That seemed to stop the most of the error messages I was getting.
So then I toggled Time Machine to "On" in its System Preferences. It shows my "Latest Backup" as having been May 22. However it won't backup the computer, because it throws this error:
"This backup is too large for the backup disk. The backup requires 1.77 TB but only 703.30 GB are available.
Time Machine needs work space on the backup disk, in addition to the space required to store backups. Open Time Machine preferences to select a larger backup disk or make the backup smaller by excluding files."even though the Time Machine drive is 4TB, and the only things on that drive are backups of the same volume that I'm trying to backup now!
[code]...
Info:Mac Pro, Mac OS X (10.7.4), '09, 8x2.26, 285GTX, 12GB RAM, 10TB
I'm trying to use Time Machine to backup 44G used to an External Hard Drive with 76.5G available. The backup process always fails. I thought I might have to use Disk Utility to "zero" out data on the external hard drive but the message pops up with an estimated 24 hours to "zero" out all data on the external Hard drive. I have an iMac G5 with 10.5.8
The following error message appears when I attempt backup using TM;
"You do not have appropriate access privileges to save file ".0019e33d49f6" in folder "Time Machine Backups".To view or change access privileges, select the item in Finder and choose File > Get Info."
Spotlight can't locate this file, I've ran disk utility to verify and repair the internal drive, verified the external, no problems on both counts. I even tried allowing read & write privileges temporarily to everyone on both drives, but no luck.
Just receovered from a disk crash. TM brings everything back on my new HD. The problem is that when I try to backup again, I get an error message saying to check TM's preferences. One problem may be that it seems that TM wants to back up the full HD rather than doing an incremental one.
Info: MacBook Pro, Mac OS X (10.6.8), 2.53 GHz, i5, 8GB, 500 GB
I recently had a external disk fail that was still under warrenty, so I dually went to the Apple store and got a replacement. After plugging it in I went into Time Machine and performed a restore (I was backing up the external disk to another external time machine managed disk). All worked perfectly so far. However, come the next backup I got "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume"
Searching the forums I don't see any obvious solution. In the system log I also see 'Event store UUIDs don't match for volume: MyBigDisk' every time there is a backup.
So I just started using Time Machine (had been using CCC). A quick scan of my backup shows that it's not backing up my Outlook email database file. This missing file is very concerning to me. First of all, this is one of my most important files, needless to say. But also, it makes me wonder, what other important files might Time Machine be deciding to skip without my knowledge. I went into my Time Machine preferences and have no exclusions in there
i have a case where i have a large file (a sparse disk image) which at some point in the past seems to have become corrupt in the sense that there were problems reading it.eventually, i realized that attempts to clone the drive containing the bad file were failing (super duper reporting an error).an attempt to finder-copy the disk image also failed.i went to find backup copies of the file in question in my time machine backups and realized that the file did not exist in my backups.digging through system logs, i discovered that when time machine encountered an error when reading the file, it was failing silenty - that is, no error was reported via time machine - backups were seemingly completing successfully.so as a result, i went quite a long time with no backup of the failing file, nor any obvious warning that it was failing, even though time machine was encountering an error every time it tried to backup the file.
this seems like a major problem, perhaps even a design flaw in time machine.in fact, it is really the extreme opposite of the behavior i would consider "reasonable" for a reliable backup program.i somehow misinterpreting the data? any guess as to why time machine would not report when it tried to read a file during a backup, but failed?
For the past two weeks I've been having some major issues backing up my computer with Time Machine. It's become quite a process.Â
iMac 27", Mountain LionÂ
I am backing up to a brand new - well bought in February, '14 - 1TB external hard drive and there is NOTHING else in there except the TM backups.Â
For the past two weeks it's been failing the automatic backups. There is PLENTY of room on the drive.Â
The exact error message reads:"Time Machine ErrorUnable to complete backup. An error occurred while creating the backup folderLatest successful backup: [time and day entered here]"Â
To remedy this at first it was as easy as un-mounting the drive and then plugging it back in and it was fine.
Now I've got the disk utility open and constantly repairing the drive and this is only a temporary solution.Â
Below is a small sample of the report from the utility each one is dated.
How to fix this without having to purchase a new drive? In February the old external drive I had started to freak TM out and it just erased ALL my backups which I desperately needed due to the same error / failure. That drive had plenty of space as well but I lost all my stuff anyway.Â
I know the TM isn't for archiving and another question I have is, How can I transfer or even rename the backup folder that TM makes and move it to a 'free drive' to prevent overwriting? Right now I just keep buying new drives which is ridiculous.
I've bought a 1 TB iomega ego mac edition II external fire wire drive. Once connected it asked whether i want to create a password and whether i want my data encrypted, to which i answered yes. Then a time machine backup started and failed after backing up 5.25 GB out of 39 GB of my data with the following error: "The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup". When i look at time machine it shows there is 994.29 GB available on iomega ego drive. The drive then went into: "Encrypting Backup Disk" message and it takes forever.
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free) Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I had to restore my Macbook Pro to a previous backup because of an issue I am experiencing. I seleted the Restore option in Lion Recovery, I seleteced the backup I want to restore from on my Time Capsule to restore, initially the restoration looked good. However once the progress reached 0.6% the restore simply stopped and the estimated time rocketed indefinitely up to some 200 hours. After I gave it a second attempt, this time again the restoration stopped at 0.6%, and when the estimated time reached around 26 hours an error message showed up saying the files cannot be restored and prompted me to restart my computer. I have attempted a repair of the sparesbundle in Disk Utility on my iMac and I am giving it a third attempt. I haven't done anything to the sparesbundle file and it backs up perfectly fine up until this morning right before I decided to restore my old system so I am brushing file corruption aside.
I have a mid-2010 13" MacBook Pro running Mavericks, and a new 2 TB Time Capsule. I'm trying to install a new internal SSD to replace the four-year old one it came with. I swapped the new SSD in with no trouble, and booted my computer into Internet Recovery. I selected the option to rebuild my machine based on a Time Machine backup, and it churns away for a while until it hits about 85% installed, and then it reboots (and fails to startup properly, giing me a spinner on the gray apple screen).Â
The new SSD is twice the size of the old one. I've put it in an external enclosure and mounted it, ran disk utility on it to make sure that it's working properly. I can't think what else to do, and I can't imagine why it fails at the same point in the rebuild every time!Â
A series of backup related problems have occurred: Upgraded to Lion and then TM failed to backup: "Error while copying to backup disk" (using Lacie d2 Quadra HD that has been performing well for 2 years). I also have a second Iomega MiniMaxHD with a carbon copy clone of my Snow Leopard mac on one partition and a second partition with other iphoto/.itunes/ document backup and now I cannot copy my iphoto library to this HD for a backup: " Operation could not be completed because the item "iphoto Library" is in use", even though all applications are off.
Tried multiple times and the transfer of the iphoto library always fails midway through. I have lost both my TM backup and my ability to backup to other drives because a new problem has arisen: every time I try to load an external HD I can't eject it: can't eject because error message says that the "Finder is using" the external HD and then I have to Force Eject, risking data loss.
I have so far tried: restart mac, reset PRAM, unplug/verify and repair disk multiple times for all of the external HDs as well as my Macintosh HD; I have erased the Lacie HD and reformatted it while rebooting from Lion Recovery HD and then TM still failed; I have also tried deleting from the Library my TM plist as well as my iphoto p.list. I even tried using a brand new Iomega Minimax HD and TM still failed
I have Lion 10.7.4, 2.66 GHz Intel Core i5, 8GB RAM
I can find the desired 4 files in a â„¢ backup a week old. I select the four files in the Finder for that backup and click Restore in the lower right. Time machine fades back out, the same 4 files are still in the Finder window, but when I do a search for the files they are not to be found.Â
Running 10.9.3 on a MacBook Pro and just replaced the hard drive. I did a Time Machine restore and Mail is now hanging part way through the import. I saw a number of threads on this issue and and fixed permissions and deleted the Envelope Index files. Still no luck. I'm unsure what else I can do to isolate the problem. Is there anything that I can restore that would not require Mail to re-import? Â
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
