When I quit Word:mac 2008, I always get an error message that reads:"A file error has occurred. Check your network connections or make sure the disk is properly inserted and not defective.I have repaired permissions, rebooted, and did everything I could think of to fix this without any luck.
View 21 Replies
I was wondering if anyone besides me has encountered a problem saving Office 2008 documents to a Windows server (SBS2003 SP2, not RC2 in my case) in 10.6.After upgrading to 10.6 everything seemed to be fine with my Office installation until I tried to save a document that I had opened from a network share. When trying to save a document opened from a Windows share I receive the following error message:Word cannot save this file. The disk may be full or write protected.
View 3 Replies View RelatedSo i decided to update my machine to 10.5.5 before I pushed this out to everyone. The main problem i've seen so far is with a failed login using a mobile account that is bound to active directory.
My machine is currently bound to AD and i have a mobile account. When I start up the machine and attempt to login with my AD account, it fails. The only time the login works is when i unplug the machine from the network and log in. Everything in directory utility shows green light that i'm still bound to AD. At the login screen, I also have a green light saying network accounts are available as well. The only accounts that work are local accounts.
Anyone else experiencing this and what have you done to cure it?
So I got Office 2011; it's pretty good stuff. Unlike Windows based systems, it did not remove Office 2008 which is different. I am wondering if there is any reason that I should or should not remove 2008 since I have 2011 (exact same programs).
View 4 Replies View RelatedI forgot my administrator's password for my home computer. I purchased office 2008 for mac with a free upgrade to office 2011. I upgraded it to 2011 when it came out (late 2010/early 2011). I have since made a new password and forgotten what it is. The mac tells me to reinstall my microsoft office but when I do, with the office 2008 disc, it tells me I have MORE RECENT SOFTWARE and to use that. I did it on line and cannot find it again.
Info:
iMac, Mac OS X (10.6.8)
Microsoft on Tuesday released stability and performance updates for Office 2004 and Office 2008 for Mac, both of which also patch vulnerabilities that could allow an attacker to overwrite the contents of a computer's memory by using malicious code.
Microsoft Office 2004 for Mac 11.5.1 Update
Aside from the security fix, Microsoft Office 2004 for Mac 11.5.1 Update [14.5MB] also updates the Japanese postal code dictionary in Entourage and fixes an issue that causes Word 2004 to close unexpectedly when opening a document that contains a numbered list.
Microsoft Office 2008 for Mac 12.1.2 Update
The 12.1.2 update for Office 2008 for Mac [159.6MB] is more substantial, repairing a global issue that prevented all Office 2008 applications from running AppleScript scripts from the Script menu, while also delivering a number of individual fixes for Word, Excel and Entourage.
More specifically, Microsoft said Word should now launch more quickly and tables will no longer included random instances of bold text. Other changes improve the display of form fields and the reliability of headers & footers in the word processing application.
Meanwhile, Excel should now open spreadsheet files that contain invalid characters and see improvements to the overall performance of calculations. Number formatting for some international languages and stability when saving workbooks that contain PivotTable reports has also been improved.
One of the major focus areas for Entourage was to improve stability when using Microsoft Sync Services, Microsoft said. In particular, Tuesday's update fixes an issue that where all contacts in Entourage or in the Apple Address Book would be deleted and re-created when you use Microsoft Sync Services. It should also prevent duplication of events and other items in Entourage or in iCal.
Other changes to Entourage focused on improving junk mail filtering, recurring calendar events, time zone information, embedded images, and the reliability when Entourage establishes a encrypted channel.
Student Office 2008 deal
Earlier Tuesday, Microsoft said it has teamed with a select few Apple authorized resellers like Amazon.com to offer students up to 30 percent off its various Office 2008 productivity suites when they're purchased alongside a new Mac before September 8th.
The offer translates into $15 off Office 2008 Home and Student Edition, $80 off Office 2008 Standard Edition, and $150 off Office 2008 Special Media Edition..
Amazon is also offering between $50 and $200 rebates on Apple's entire Mac line through August 25th.
Ready to install Office 2011 for Mac. Currently we are running Office 2008 for Mac.
What is the best way to eliminate Office 2008 and to ensure a clean Office 2011 install?
For most Mac programs, I would normally drag the application folder to the trash, and then do a library search for some entries related to the program. Will this work for Office 2008 to Office 2011? I ask because the M$ installers seem to more than simply add the app to your app folder and update the libraries - and don't get me started on the horrors of the Windoze registry errors.
So here is my dilemma. I got a letter a few days ago from the college I am going to, and it included a list of requirements if we were bringing our own computer. One of the requirements was if we had a Mac, to have Office 2008. I have talked to a friend who is replacing her current Macbook with another Macbook later in the summer, and we decided that when she bought her Macbook, that we could split the price of Microsoft Office for Mac 2008. Now, should I just go ahead and continue on with the plan with my friend, or what? Is there a huge difference in Office 2004 and Office 2008?
View 7 Replies View RelatedThis is a technical question out of pure curiosity. I could probably dig through the documentation, but that would probably take longer than my curiosity would hold out, so I figured "why not ask?"
I occasionally switch between wireless (g) and wired (gigabit) networking with my home laptop on occasions when I want the extra speed for accessing large files. I'd noted before that this was pretty transparent, but for the heck of it I did a test today:
Connected to my home server (10.4's built-in AFP sharing, gigabit to a new Airport hub) using wireless, and started playing a medium-bandwidth (1.5Mbit/s) video file. With it playing, I connected the hardwired Ethernet, waited a bit for it to get an IP address, then tuned off the Airport card. I was honestly surprised that the video didn't even stop playing (and not due to caching), so obviously the transition was transparent enough to the app that it didn't stall out long enough to mess up the video. Switching back worked as well--in fact, I could tell it was changing, because via wireless there were slight glitches in playback, I'm assuming due to the way the player (mis-)handled preloading on a relatively slow connection.
Which got me wondering: How exactly does OSX prioritize network traffic when there are two available paths? All to the faster one, some connections prioritized over others based on hardware, or does it spread traffic around?
Also, given two alternate paths to the internet, what kind (if any) of load-sharing will the OS do by default? I'd always assumed that you'd need a special router to combine two separate internet connections (say, cable and DSL), but this got me wondering if OSX (given two network paths) would do some of this load-sharing by itself. I of course don't have two internet connections in the same place to try this with.
I have allowed iTunes to accept incoming connections, and my firewall is on, but is still gives the warning;
"Do you want the application “iTunes.app” to accept incoming network connections?"
how to stop this warning form comning uo every time I lauch iTunes?
This is my sis's Mac mini, running the latest Lion OS and latest iTunes version 10.6.1 Her mac mini is on our home Airport Wireless Network.
Whenever she launch iTunes, she gets this pop-up message:
Do you want the application "iTunes.app" to accept incoming nework connections Deny and Allow buttons. Every single time have to click 'Allow' to continue.
Check the Firewall settings, it's on. Inside Advance Settings the iTunes allow all incoming connections. This is not really annoying and disturbing, but have to allow almost every day when iTunes is launched. The other way is to disable Firewall.
Info:
iMac, Mac OS X (10.7.3), iPhone 4S 64G, iPad2 3G+WiFi 64G
In our house we have 4 macs...two of them are new and I set them up by restoring from TimeMachine rather than with the migration tool as I have done in the past. This was recommended to me as a "cleaner" way to set up new machines (at least on an alternating basis).
On these two new machines I get a popup "Do you the application "microsoft word.app" to accept incoming network connections (this is also for excel or any office product). I'm still using Office for Mac 2008.
The only way I can find to stop these annoying popups is to turn off the fire wall, which I do not want to do (and which I have not done on the 2 mac books and they work fine).
Is there some setting or script I can run to fix this?
Info:
iMac, OS X Mavericks (10.9)
I have someone monitoring my outgoing internet connections. That person sends pings, knows my logs and IP addresses I connect with, Skype is of his highest interest. Is there any way to protect myself from people monitoring what I do and what websites I visit? Or at least to know WHEN I am being watched? Is Network Utility of any help?
Is so, how to interpret it? I don't know much about MacBook, I was a Windows person till July. I had Tor, Privoxy and NetShield installed but it's a bit fussy and slows the connection. I have a MacBook with Intel 2.1 GHz processor, Leopard 10.5.6 OS and Safari 4 beta (552816). I use a wireless internet connection via a USB modem (Huawei E220). That person uses a PC with Windows XP.
I have several home security cameras that utilize Java.I've had them for years. But just in the past day, I've begun noticing a lightning fast popup that comes flying by and leaves so fast I can't even read it. It happens when I first launch one of the cameras in either Safari or Firefox (likely would do the same in other browsers too. I finally had to use a screen recording app to be able to record when the pop up flies by.I then slowly scrolled and paused on the message.It is a standard security message that says, "Do you want the application "Java" to accept incoming network connections?"
There is an ALLOW and DENY button but there's no way the popup ever is on the screen long enough for you to even read it, let alone click on a selection. I see lots of other posts about this around the discussion forum and I see how I could go into the Security preferences and perhaps allow network connections there, assuming I can figure out how to point to the correct piece of Java code (System/Library/Java/JavaVirtualMachines/1.6.0.jdk???) But my bigger question is why now? I haven't done any updates in the recent past and I log onto to these cameras every day... Granted this popup goes by fast but it is noticeable... Had it been there a week ago I would have noticed it... But no... It just started today. Why? And why would any message that seeks a user choice automatically appear and then disappear within a fraction of a second?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have (had) an effective VPN connection established on my iMac to enable connection to my work computer. I recently reviewed my use of users, creating a separate administer account and changing my home account privileges from admin to 'standard'.
I am now unable to use the VPN connection from my home account. The connection shows in the Network pane but the "Connect" button is greyed out. If I unlock the Network pane using the administrator details the Connect button becomes operational.If I change to the administrator account I can use the connection fine.
How can I enable the use of the VPN connection from a standard user, having locked the network connections (for the sake of not having children interfere with the network settings)?
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.6.4)
I have a QNAP 219P is keeps disappearing in finder, however I can see and connect to it in Qfinder and admin, cant see anything in the logs.
View 3 Replies View RelatedI get this Accept or Deny message every time I open iTunes. I realize I have Firewall enabled, but is there anyway to set itunes to accept automatically?
View 2 Replies View RelatedBecause I have Firewall enabled, everytime that I launch iTunes, I get a popup asking me: "Do you want the application "iTunes.app" to accept incoming network connections?" I click on "Allow." But unlike other applications where this process is only asked once, the first time you launch an app, I'm asked this every time.
I've talked with AppleCare about this, and the representative told me it may be because I've disabled "Copy files to iTunes Media folder when adding to library," because I prefer to organize my music folders my own way. She offered 2 work arounds:
1) Enable file sharing of my Music folder. It didn't work. The prompt still occurs every launch.
2) Reinstall iTunes. However, admittedly, she said this may not necessarily resolve the issue as it could simply be because I'm not using iTunes' file location by enabling "Copy files to iTunes Media folder when adding to library."
Does anyone have any idea how to resolve this? Also, if I reinstall iTunes, will I have to re-add my Library to iTunes or are the relevant database/album covers files & folders retained?--it took a few hours for a collection of my size to be added.
Receive "Do you want the application "iscsid" to accept incoming network connections?" at every startup in OS X Mavericks 10.9.4. Have configured Firewall to Allow access (iscsid...Allow incoming connections) but still receive prompt. Only Support page that seemed somewhat related is URL.... Installation of Java also did not alleviate problem. No communication issues with Drobo Mini or Dashboard - just tired of receiving seemingly unnecessary modal prompt upon boot.
Info:
MacBook Air (13-inch Mid 2011), OS X Mavericks (10.9.4)
On startup I get a window that asks, Do you want the application "Service" to accept incoming network applications. I can't get rid of it nor can I discover its source.
View 2 Replies View RelatedI'm sure most people suffer from this but here goes.
So I make a presentation on Mac Office powerpoint, everything is fine. I open it up at university on the PC, all is fine. I maybe change some text on a slide and save it again. Open the same file again on my Mac, and it won't open some silly error comes up saying trouble accessing file from mac HD.
Then luckily I have keynote, so I just open it in that and use that.
Point is why does this happen?? Whilst keynote is better, sometimes I have to edit things on a PC at work or uni and then it becomes a giant mess on my mac.
Is there a quick fix, or will I have to throw Mac Office into my growing pile of Microsoft related garbage.
I have been using office X for years. Now I have downloaded Word 2008 for Mac. What do I do to keep the settings the same? My documents are not opening with the same formatting. I want 2008 to look the same as office X.
View 4 Replies View RelatedI bought the 2008 version of Microsoft office for mac and i am having a huge problem.
I attempted to customize my toolbar for Word but messed it up.
many options like view and file are gone from my toolbar at the top (and others)
Is there any way to reset the settings of the toolbars for word or even office entirely????
Am I the only one who have noticed that initializing office (word, excel, etc.) got much snappier than before it was updated to 12.1.7? It seems Microsoft has done quite a good job on improving the office for mac.
View 3 Replies View RelatedI am about to install Office: Mac 2008 because my PC died & was sent to home office for "repair" (may take weeks).
1 - can I open & modify Excel 2003 files in this mac 2008 version?
2 - Mac 2008 excel docs - if sent to PC users, can they open them and modify them?
3 - Best Buy sold me a copy that says "service desk edition" on the front - is this normal?
I need to open a xlsm VBA Excel file created on a PC. What should I do? I have read that I can download an Open XML Converter if I get 10.4 Tiger OS X (I have 10.3.9 Panther) OR I can get Excel / Suite 2008. What would you suggest? Any other options?
View 1 Replies View RelatedWhich is better? Neo Office/Open Office are ok. The UI for both really suck, so I want to pick a good package...
I can get Office Home and Student for 89 dollars on Amazon.
There are also some things that just don't work right in the Neo/Open Office packages like labels. I have already been through that frustration. Even iWork doesn't have the same label support as Office... at least as far as I could tell. I have iWork 08 but I got frustrated with it making labels. That's just one example.
I recently purchased and installed office 2008 for my macbook pro. I had office 2004 before that and all the templates opened up in english. These same templates now open in a different language in office 2008.
View 3 Replies View RelatedI have been attempting to uninstall office 2008. I open the supplied uninstaller (RemoveOffice.app) and let it run for a couple of hours but it never completes it's search for versions of Office to uninstall. I searched around but I have been unable to come up with any answers.
View 4 Replies View RelatedI just installed Office for Mac 2008 and after my name it picked up another line of data. I'm not sure if it propagated and I missed it, or what happened. Anyway, I tried to uninstall and reinstall Office, and also tried emptying the trash before the reinstall. However, I cannot get the screens to come up that ask for the product key and name so that I can correct this. Does anyone know how to do this?
View 2 Replies View Related
