i have an emac usb 2.0 which i'm trying to configure for a relative.
however, as i tried to put a dvd in (a commercial dvd), the emac simply refused to take it and ejected after a few seconds....
however it does accept CD (commercial music stuffs) no problem...
does it mean that my combo drive does not read DVDs?
why i can't open youtube on Safari.
i've mac os x 10.3.9
It has decided that it just won't recognize them. I played lots of 'em for a few months, but now when I try it says there are no files the mac os x can read.
View 3 Replies View RelatedMy CD/DVD ROM drive recently went faulty with a split internal ribbon so I decided to use it as an pportunity to add CD burning with a Combo drive. DVD burning wasn't really an option as I only have 3.5g of a 9.8g HDD to play with.
View 1 Replies View RelatedIt will draw them in, groan like it's about to spin up, pause, then groan some more. I hear it spin up a tiny bit, but not to the rate it usually does. The fact that it's spinning at all makes me think it's a read head/lens dirty problem.
View 5 Replies View RelatedI wanna know how I can change my combo drive with a new one because this which I have is broken, I have a powerbook g4 at 12 inch, I have search it on the internet for some tutorials but I didn't find no tutorial, I found how to remove the hard drive but not the cd drive. Does any one knows how to do this.
View 3 Replies View RelatedI found this iBook in my dad's attic at his business. He said he had bought when they released and planned on using it for financial stuff, but figured his Windows laptop would do better. It was in its box BTW, not collecting dust.
Anyways, it's out of warranty and it's specs are:
1.07 GHz PowerPC G4
768 MB DDR SDRAM
Combo drive
12" screen
30GB HD
The combo drive is not fun. It takes a good push, no shove, into the slot for it to go in. It reads it fine and all, and can burn CD's, but pulling it out is plain horrible. I can't just take it and pull it out, I have to have my dad hold the iBook, and I grab the CD and pull it out. The CD ends up having deep scratches and is unreadable from then on. What do I do? Replace it? Or is it repairable?
I had the brilliant idea of trying a clean install of OS X on my circa 2002 iBook. I had Tiger on there, but the iBook was quite sluggish and I was getting frustrated with the performance of the iBook on the only thing that I wanted it to use it for: the internet. So I thought that if I wiped the hard drive and installed OS X again, I could benefit from erasing an accumulation of junk on the iBook. (One thing to note is that the hard drive is actually from a clamshell iBook. The hard drive stopped working a few years ago, and I spent a weekend replacing the drive)
The combo drive has long since stopped working on the iBook, so I hooked up the iBook to my MacBook via firewire and erased the hard drive. But like an idiot I installed 10.5 instead of 10.4 and now the iBook only returns the folder with the question mark. I have not had any luck (either before the ill advised OS X install or before) with doing a remote install. I have the original disks that came with the iBook (10.1), but when I try to install them using the MacBook's drive it just tells me that I can't install it on my MacBook, which is not what I want to do.
what's the difference between client combo and server combo? Also, what would happen if I install both?
Info:
Logic Pro, Mac OS X (10.7.2)
This is a Mac Mini operating on OS 10.58. I have a CD in the combo drive, and it apparently has something recorded on it. I think this CD had started to be burned and I stopped it. The computer indicates that this CD is not blank. The result is that it will not eject, even after several attempts using the small eject arrow at the top of the desktop, the use of apple-E, and after repeated efforts with a complete shutdown -- still the disk is stuck in the drive. I suspect that it's in a loop situation, where it tries to run the CD with not effect, but it also cannot eject it.Â
I notice a small black square, appearing to be black plastic, at the far right end of the CD/DVD player slot at the top of the Mac Mini. In the old days there was such a hole into which one could stick a straight wire, like a heavy duty straightened paper clip, and it would physically eject a stuck disk. Is there such a thing on this Mac Mini?Â
Info:
Mac mini (Late 2006), Mac OS X (10.5.8)
This is a re-formulated post about using a SSD for boot and apps and a HDD in the optical bay for storage of files. I still want to post it here due to the MacBook Pro specifics surrounding the drives. I am putting in a 160 for the SSD / boot, as it stands right now the drive will have not more than 60GB on it with my music, 13+ GB of mail archive and other files. The rest, movies, websites, photos and any other media will reside on the storage drive in the optical bay. Applications such as iView Media Pro and Mail Steward have safe mount / unmount behavior in terms of operations so those should be fine when the disk is unmounted. I expect to have both drives running most of the time unless is gets rough or I need juice for longer spans. What I am wondering is what strategies for keeping a smooth running combo of twin drives have people been using in terms of keeping as many files off the SDD but not corrupting the OS when reading a disk and then having it unmounted?
I know the "other" thread is a good source but it is 23 pages long at this point but enough people are doing this now that it will be a common question as some point and it is really only touched upon a few times in the other thread. I have used CCC to dupe my current data in 2 locations, so I am safe to muck around with this now. I would expect it to be fine to boot off of any one of the three drives to move the 60GB working set and OS onto the SSD. Should I use one of my external backups to do the initial boot and then re-boot out of the optical to set up the clone to the SSD? It kind of makes sense to me given the fact that the HDD with the native OS will have moved from one SATA location to the other. This just seems different to me than my desktop because this is a mobile device and the way power / drives and other little details interact is worth looking into.
I recently began using my computer again after having to replace the power supply. Since then, my computer has refused to read cd's. It doesn't recognize data cd's at all. For audio cd's my computer mounts them but won't play any of the files and iTunes won't play them either. When I try to play audio cd's in iTunes I can hear combo drive doing something. I'm not sure if this is a software or hardware issue.
View 3 Replies View RelatedThe local Apple Store recently replaced the logic board and power supply for my G5 iMac. Today I tried to load the system restore disc to re-install the OS etc. in an effort to prepare it to sell (I want to have all my data gone).I put in the disc. The computer took the disc but it never showed up on the desktop or finder. And yes, my system preferences are set to open a finder window when a CD or DVD is put in the drive. Ejecting it became a challenge. I tried holding down the mouse button while booting, and booting into the open firmware (got an error message when I typed "eject cd"). Resetting the PRAM failed to help. The only thing that worked was to jam a credit card in the slot and stop the disc from spinning, and the machine spit it out.
View 2 Replies View RelatedI have a " 12Mac iBook G3 (700mhz/128mb/20gb) with combo drive (12.1 16VRAM) Toshiba DVD-ROM SD-R2102. System software installed: OS 10.4.1. I'm a longtime Mac user (have a beige G3 desktop at home and a blue and white G4 desktop at work fairly familiar with OS-X), but by no means a true technie. My brother borrowed it for a couple of months, installed some software he needed to do some work with, then shipped it back to me via UPS. Now, the CD/DVD drive rejects all audio, data or video disks -- the drive whirs for anywhere from about 15 seconds to a couple of minutes, then the tray pops back out. Some disks seem to stay in the drive, but no icon ever appears on my desktop and no interactivity begins with the disk. I've tried inserting disks 30 or 40 times and maybe 3 or 4 have mounted to the point the disk icons appeared onscreen. Of those, a couple were audio and did not start to play music (although in one case, I got iTunes open and the tracks seemed to be registering).
In another case, I got a software CD to mount and tried copying its contents to my desktop , but an hour and a half after it started trying to copy the files, an error message appeared -- sorry, didn't manage to write it down). I have tried booting it up with an old OS 9 installer CD and that seemed to work (although the splash page was the gray apple with spinning gear beneath it -- not what I expected to see from a system 9 cd startup?). A friend told me to try that and if it worked, it might indicate this is a software-related problem rather than hardware, but I don't know. Prior to rejecting disks, the drive seems to whir at a fairly normal volume -- nothing violent or unusual. Sometimes it sounds as if it is working hard and sometimes it is fairly smooth sounding, but as I said, I haven't been able to really DO anything with a disk of any kind since receiving it back from my brother. He says it worked great for him -- before and after he installed some new software -- and that he was using audio, visual and data disks on a regular basis while in his hands.
The computer and all programs seem to work just fine -- except for the combo drive. The only other thing I can add is that he managed to lose two of the remaining rubber feet off the bottom, so now only the battery corner has a rubber foot. Does that slight imbalance make any difference to the reading ability of the drive, by any chance? Any suggestions you can give me to check the cause or cure this problem would be greatly appreciated. My brother is in the dog house with me, yet I do believe him when he says it worked great for him. Also, the shipping container looked fine and he did a good job of bubble-wrapping it. IF it had been dropped by Mr. UPS, could this have caused a problem even if the box looked good? (Shipping was insured, by the way.)
I have a Late 2006 20~inch iMac with a USB2.0 & 1394 & eSATA combo Drive {SBP-LUN}. I have a Macally external drive that has an eSATA port. My iMac has no eSATA port. I am presently using the Firewire 400 ports {1394}to connect the external drive to the computer. How do I utilize the eSATA part of the combo Drive? Â
Info:
iMac, Mac OS X (10.4.11), Intel
Just picked up this iMac, and it was freshly loaded with Mac OS X 10.2.3. Boots up just fine, gets to desktop normally.Â
However, I can't use the Apple keyboard to eject the combo drive that is empty (no CD inside). The Eject menu is greyed out, and even when I drag the Eject icon to the window for favourites, it is greyed out, so I can't eject the drive.Â
However, when it boots up , if I hold down the mouse button, it does eject the drive.
I am about to get a Sherwood home theater receiver (RD-8601) and I want to watch dvds on my iBook g4, with surround sound coming through the receiver.
If I connect my 1/8 inch stereo jack to the inputs (RCA) on the receiver, can the receiver turn it into 5.1? OR Do I need something like the FireWave that will send 5.1 to the receiver? I did search for and read similar posts, but did not find my answer.
my ibook doesn't read dvds anymore like it used to, but it will read blank ones if i use an external dvd drive, but when i try and insert a normal dvd (ive tried a lot of dvds so its not just one disc) in the laptop drive or the external one, it says "The disk you inserted was not readable by this computer." and gives me an option to ignore or eject.
i tried creating a new account, but the same thing happened, so i used my install disks to install mac os x on an external drive and booted from that and the disk worked! but, ive got lots of important data on the laptop drive, so im stuck here.
I'm thinkimg of buying the samsung ln46c670 tv, and already have a free agent go flex hard drive, with a mac laptop. I want to play movies from my hard drive on the tv with out my computer being in the way. My question is how do I do that, and is it necessary to buy the freeagent go flex tv media device to play it through. Or should I invest in a bluray player that is wirless ready, or if I even need the c670 model tv with the internet apps. Which combo package would be the best?
View 2 Replies View RelatedI have a mechanical fault with my combo drive (cdrw/dvd) in my Powerbook 12" 1.5 GHz running Leopard which makes it noisy even when there is no disk in there. Is it possible to disable the device by removing it from the device tree in Open Firmware before OS X boots? It sounds like the drive is checking for a disk. I am sure there is not a disk in there as it still accepts and ejects other disks. If it were to be removed from the device tree would this likely solve the problem, or would the power cable to the drive have to be physically disconnected?
View 4 Replies View RelatedI want to replace the Combo drive that's in my 1.83GHz Core2Duo Mini with a Superdrive - has anyone got any suggestions for a UK store that sells one for less than ?40? All I can find are SATA ones, and I think I need a (P)ATA one?
View 1 Replies View RelatedI have the above combo. Trying to play blu-ray dvd but powerdvd won't play. Mac Mini is not built for blu-ray?
View 2 Replies View RelatedI've been searching but I can't find anywhere where my specific problem is answered. Short version: Does Remote Disc work in Tiger (10.4.11)? Long version: I have the following:
Macbook running 10.4.11; busted DVD drive
PC running Win7 w/ Firewire port
Snow Leopard install disc
I'd like to get Remote Disc running on my laptop and install over the network (using my Win7 PC). I've done the terminal hack which is supposed to enable Remote Disc on MacBooks. However, Remote disc doesn't show up in my finder (not sure that 10.4.11 has a place for it to show). Does Remote disc work with Tiger-Macbooks? Or do you need Leopard? If Remote Disc won't work, can a Win7 PC install Snow Leopard via firewire to a Mac? If possible, I'd like to avoid buying an external DVD drive, as it appears Remote Disc will work in Snow Leopard. Don't have a firewire cable on me but I could buy one -- just want to be sure it will work before I waste the money.
My G4 12" PowerBook will not burn DVDs with the newer 8x or faster DVDs.
It has the 2x burner in it and I have't been able to burn DVDs since I ran out of 2x disk some time ago. (I can't find any 2x disk around here any more.)
I made backup copies of a few games in Toast 8 and wanted to test them out. Whenever i put them in, it tries to mount, then it ejects. The disks work fine on my MacBook but for some reason wont mount on the powermac.
View 3 Replies View RelatedI sorta have a project in mind I'd like to attempt, but I'd actually like to know if you think it is possible. I have plenty of computer engineers and computer savy folk around here to help me with it, but i'd like to know if it seems possible before i decide to start. I have an old g3 imac... that worked until the harddrive was taken out that is... haha. I got it from some old school equipment the were getting rid of. The harddrive and ram were taken out before it came into my posession.
Anyway what I would love to do... is basically use the casing and the screen , but swap out the processor to ATLEAST a g4 as well as put in a superdrive, more ram and a bigger harddrive... Really i'd like to put new components into a g3 imac casing. It would be really great if I could get g5 parts in there but I know that's a long shot especially keeping cost low (idealy would be intel parts, btu as they are newer I know i won't be finding a good deal on any scrap pieces from those)............
So I was trying to copy a DVD I put in my imac that I recorded on my video camera. I hit the COPY DVD and its working, but its saying its going to take up over 2GB of space for a 50 minute recording, & there is no cancel option! I'm trying to cancel the copying process and it won't let me. The Red X in the top left corner is grayed out, and there's nothing on the top menu options. Why is this happening? I thought it was supposed to be easy to put your DVDs right to the hard drive.
View 6 Replies View RelatedOk so i have an early 2008 Mac Pro, that has been reformatted couple days ago. So when i install my softwares again and i realized some of the DVDs can't be read anymore, the drive just makes a certain sound every 5 secs or so and eventually it just ejects by itself. Now the weird part and the thing i just don't get is why it's only like that for certain DVDs.
For example, i was installing Ableton Suite 8 again, and there are 4 discs. For some reason disc 2-4 work but the Disc 1 doesn't read at all. And i know it's not a problem with the DVDs cause they work on my macbook pro and even my PC. And i tried to burn a copy of that disc 1 into a blank DVD and tried to run that to install and it worked, so it can't be any data issues or whatever with the DVD.
Is this a firmware issue? if so how do i fix this? I thought at first it could just be because i reformatted my mac recently and then this all happened. But i've reformatted my mac several times before and never had this problem. Or this is optical drive just laming out and its time to buy a new one?
But then again why does it work for some DVDs and not for others? It's just BUGGING me ALL DAY.
oh and the drive model is:
Sony NEC optiarc AD-7170A
I recently came back from a holiday to find that my CD/DVD drive on my intel iMac has stopped working properly. If i put any sort of CD or DVD in the slot in makes a few sounds a just pops it back out about 3 seconds later.
Any ideas on what i could try to get it working again. Maybe reinstalling firmware or something.
I have tried every type of disc in my drive and it doesn't show up. I hear it spin up but then nothing.
Here is the computer info:
Model Name:Power Mac G5
Model Identifier: PowerMac7,2
Processor Name: PowerPC 970 (2.2)
Processor Speed:1.6 GHz
Number Of CPUs:1
L2 Cache (per CPU):512 KB
Memory:2.5 GB
Bus Speed: 800 MHz
Boot ROM Version: 5.1.5f2
The cd/dvd drive is:
PIONEER DVD-RW DVR-106D
Firmware Revision: A606
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
Info:
PowerMac, Mac OS X (10.5.8)
My Macbook Pro is barely 18 months old and is now refusing to accept any DVDs including the Leopard disc itself! Other discs such as Music CDs & CDr's work fine with no problems at all and to be honest I don't know what to do at all?!
I did not take out the Apple Care Plan as I was a student when I purchased the machine and could not afford the extra on top of what I was already paying! Having just spoke to someone from Apple over the phone they offered me a chat for �35 I think he said in his foreign lingo.
