I was attempting to use Migration Assistant to move files from my wife's old PC (Windows 7) to her MacBook Pro, which uses Lion. The first connection went fairly smoothly, but we were connecting over wifi so it moved very very very slowly. Also, I had neglected to turn off Windows update and that ended up crashing the transfer. I tried to restart the transfer today (after shutting down Windows Update, Firewall, and other stuff I could think of), but now the two computers won't speak to each other. Both computers show up as being on the network.Â
Migration assistant freezes up with about 2 mins left, will not reconnect to Mac. I have tried 2 times! I'm in the middle of the Inital setup with my MacBook pro.
I'm transferring files from my MacBook Pro to the new iMac. I decide to use the Migration Assistant and proceed to connect both machines using the USB port. All looked nice in the beginning and the bar tab status started to fulfill indicate the advance and hours to finish. Since yesterday in both screens indicate "3 hours and 53 minutes remaining" and don't go forward. Looks like the process freeze.
I have a new MBP and I'd like to migrate some of my account from my old Mac running Leopard. When I run Migration Assistant on the MBP it can seem to find the old Mac. They are connected via ethernet and a modem/router and I am able to see and login to the old Mac via Network Folder on the MBP.Â
Is it possible to use Migration Assistant in this way. What alternatives do I have, obviously doing a TIme Machine isn't an option being Leopard on the old Mac. I could manual take Mail folde, iTunes folder r and Safari bookmarks and forget the rest but figured there's a way to get Migration Assistant to do this.
I am trying to transfer everything from a new mac mini to a new macbook pro. Both are running OSX 10.7.4 but neither can find the other computer. I have verified they are on same wireless network.
Info: Mac mini, Mac OS X (10.7.4), Migration Assistant
I want to migrate from my old PC to Mac, but when I type in my password. Mac won't let me. Is there a way to retrieve my password for migration assistant?
Set up my 21.5" iMac last night, set up a new user "Rory" - then downloaded Migration Assistant on my PC to transfer files, music, pics, docs and my iMac has created "Rory1" since I've discovered I should've transfered docs across BEFORE I set up an initial user!Â
The only thing I'd set up on my original "Rory" mac account was downloading Flash Player and installing my email to 'Mail' - so I've hardly done a lot of configs.Â
Can I just delete the original "Rory" profile and use the "Rory1" profile that the Mac set up? ( I realise the Mac has done this because my old Windows PC user name was obviously called "Rory" as well).Â
Or, is it easier to try and get the files (transfered from the PC under 'Rory1') to the original Mac profile of "Rory".Â
It's only 12 hours since I first went to set the my Mac up so as I said, I'm hardly in that much of a pickle yet - am I?!Â
I have tried to transfer my file from my old MacBook Pro on to my iMac using firewire. Did not managed to transfer everything across such as contacts and all my other important files. However, all the applications were transferred.
Upgrading from Snow Leopard to Lion with Migration Assistant from separate disks inside my Mac Pro 1,1. It hangs systematically with "Less than a minute remaining" I have tried:
- Waiting 3 hours
- Unselecting Applications so just the user files are transferred
BUT always get the same result.What can I do to coax Migration Assistant to go all the way?
Info: MacPro, Mac OS X (10.6.4), 2.66GHz 7GB ram 1GB hd
I have seen Apple Support, I have seen the tips and tricks for Migration Manager. Both computers file share and can see each other on the network, Yet here I am asking for help because none of these places have been helpful. The migration assistant can't find my computer. The new one is a Mini and the other is an iMac. Both have up to date Lion 10.7.4.
I have tried using the migration assistant. It will not go beyond my selecting a migration method - From another Mac. Nor am I able to use the system preferences file sharing options outlined on apple support. I am not permitted to select the internet sharing as instructed in step 3 (in issues with migration section)... so cannot proceed from there. Using the target option to transfer files isn't working either.
When I installed Lion to my current macbook pro I didn't relise there was a new timevault. I am unable to disable the legacy version as more disc space than I have available is required.Will I be able to start fresh WITHOUT timevault when I migrate to my new Air? Or will the legacy timevault transfer.
I've just purchased a new MacBook pro, and previously I had a windows PC so I'm new to Mac OS X, so please don't go using super technical vocab I've read through Apple's article explaining how to use the migration assistant, and it says that the mac will create a new user with the migrated data. So, do I need to make a temporary user, use the migration assistant, and then delete the original user I made first? Or could I make a user, use the assistant, and copy the data from the new user made by the assistant to the original one?Â
My Snow Leopard boot disk had 12 years of accumulated crud, and was running slowly.So I did a nice clean install of Lion on a fresh partition.Redid some configuring, like sudoers, Flash, Time machine interval to 4 hours, locate.updatedb, etc. Wanted my old "Location" info (about a dozin networks).Gave Migration assistant a try. Unchecked EVERYTHING except Network Settings: Perfect.Only 24 KB. Probably just a couple of .plist files.What could go wrong? I'm running from a non-admin account. It copied all the Users. It copied all the Applications.It copied all the root level cruft. My pristine boot drive is burried deeper in crap that the American Constitution.My backup is a day old, and I worked all day. Another half a day to undo this mess. Next time I will find the config file and copy it myself.But why did it do this?
Info: MacBook Pro, Mac OS X (10.6.8), MacBookPro3,1 6GB
I just bought a new Mac Mini (Late 2014, ships with Yosemite) to replace a defunct MacBook Pro (Late 2008, last ran 10.8.5). I have a local administrative user account and some server and network data that I want to migrate from the latest Time Machine backup of the MacBook Pro to the Mini. I don't want to copy anything else to the Mini. Neither Setup Assistant nor Migration Assistant will let me deselect anything though. All the check boxes are greyed out. Clicking on them does not uncheck them. This forces me to copy everything from the Time Machine backup to the Mini. Then the Mini won't restart.  It won't even boot into safe mode. It just gets stuck in a reboot-loop until I enter recovery mode, wipe the system drive, and reinstall Yosemite.Â
Info: Mac mini (Late 2014), OS X Yosemite (10.10.1)
I'm getting a new (late 2011) MacBook Pro next week and I'm wondering which is the best method to move files to the new computer - from a Time Machine backup or Migratiion Assistant (or whatever it's called). I have an "original" MBP circa February 2006 which is running Snow Leopard (most of you might know that my current model cannot use Lion). When I bought my current MBP, I had a PowerBook G4 and used Migration Assistant with no problems but now, with Time Machine, I'm wondering if I will get a 'better' migration of files.
I had an issue with my hard disk on my imac in which I had to re-format and reinstall the OS. Since 10.7 is not available as a "rescue reinstall disk", I had to reinstall 10.6. When that finished, the install asked if I would like to transfer my stuff from Time Machine. I said "yes". Unfortunately, my time machine disk does not show up! Migration Assistant thinks my "macintosh HD" system disk is the only disk available as the time machine backup. So I skipped migration. I went ahead and did all of the OS upgrades to get back to 10.7.3. I re-connected all external disks (I have 4-the time machine disk included) and tried migration assistant again. The only disk migration assistant still thinks is available as the time machine backup is the macintosh HD system disk, not the one called "Time Machine Backup". Time machine backup is a western digital 2TB usb 2.0 disk.  I decided this morning to re-do everything again (since I still could not get my data back).the same thing is happening! Migration Assistant thinks that the macintosh HD is the time machine disk and does not see any others - even though the disk is there and mounted!Â
I bought a new MacBook Pro and used Migration Assistant. Went to open Word on my new computer and my old license/information did not transfer. This hasn't happened before.
I tried to use the "migration assistant" to migrate data form my old MBP to my new MBP. Both with Lion.it just clonated the old MBP into the new one (the main user), wich replaced some new apps (ilife, and others) with the old vervions tha were im the old MBP.I tried to erase the Macintosh HD, reinstall Lion from scratch but it happened again. What am I loosing during the process?
Info: MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.7.3)
I've found the New User that has been created on my MacAir but none of my passwords will open it to transfer my data into my regular User Account. What can I do? I've tried migrating a couple of times and I still can't open the account.
Info: MacBook Air, Bought today with the latest software
I installed Migration Assistant and everything seemed to work fine, transferred a bunch of stuff from my PC and it said it was complete. Now I can't find the transferred files anywhere.
I am unable to download the windows migration assistant to my pc in order to gain from the apple mac book pro experience. Apparently my computer needs to have windows xp or some or system to download the windows migration assistant. I have Win 2007?
I'm trying to transfer files from my Windows 7 based PC to my new Mac Air using Migration Assistant and my home BT Broadband network. On three occasions now my PC has lost it's B'B network connection during the file transfer process. The only way I've been able to reconnect my PC to the network has been by unplugging and re-booting the network hub, by which time of course, 3 or 4 hours of file transferring to my MAc has been lost and I have to start again - 3 times now and none completed!
yesterday I moved all my files from my old MacBook Pro running SL to my new MBP 15,4. I used migration assistant and my time machine backup, that I had updated minutes before. Now I realized that some folders were not copied. Do you know where I can find a log regarding the moving process, so I can check which files were not moved?
Info: MacBook Pro (15-inch, Mid 2012), Mac OS X (10.7.4)
I'm having a problem with Migration Assistant that's driving me crazy. I just bought a new Macbook Pro with a 256GB internal drive, and I have a backup of my old computer from last year that is about 350GB in size. What I am trying to do is individually take over some items from the Time Machine so that I don't fill up the HD. Here is what I have done so far:Â
I took over 100GB of an iTunes library as well as other system settings and documents. I had left something like 50GB on my internal hard drive. Not enough for my 109GB photo library.Â
So, I purchased a large SD card (128GB) to be the permanent home for my photo library. However, I had to maneuver some things around to get this to work, which has been a HUGE pain.Â
What I ended up doing was copying my whole iTunes library, which was about 98GB to the SD card. I juggled some other things around beforehand, and even though my photo file on the backup is only 109GB, it kept telling me I didn't have space. So I did the whole iTunes library instead of parts of it...Â
I now have 150GB free. Migration Assistant still tells me I don't have enough space for the transfer. How is that possible!? That's an extra 41GB of data.Â
I've already verified the HD on the macbook is fine via Disk Utility, not sure what else to do.
I set up my new air and now want to transfer my info from my macbook pro and I seem to have missed the boat and want to go back and do it . the computers are in different names with diff. passwords.
I'm moving from a MacBook Pro running 10.6.8 to a MBP running 10.7.5. I thought this would be pretty simple ... just attach my Snow Leopard Time Machine external drive to the Lion MBP and run Migration Assistant.Â
But when I go through the MA steps, MA does not see my TM drive. I've made sure I have the latest upgrades and have run Disk Utility's First Aid on the TM drive.Â
Ideas? I know I can try MA with other interfaces but using TM allows me to work on my old computer until my new one is ready.Â
