OS X V10.6 Snow Leopard :: New HDD, Tried To Restore From TM Backup Now New Disc Full?
Jul 5, 2012
My mac HD failed, I had a new one installed. I tried to restore from external TM backup, but it didn't seem to work. I tried two times - the second time, it failed and indicated that I didn't have space on my new drive. My original drive was 320g, new drive is 500g. I had about 80g of data on the new drive. Finder now shows that the new drive has only 25g available (old backup was about 280g). My attempt to restore to my last backup (3/27/2012) didn't seem to work, my old files are not on my new machine.  Â
I'm thinking my best bet is just to undo whatever has been done to my new drive. I don't have a problem formatting the new drive, as there is nothing really on it that must be saved at this point. I am not well versed in Macs (obviously), but I have enough tech sense to follow steps if somebody could offer them. How can I undo this? Should I just format the new HD and do a Snow Leopard install from scratch, and then try again to restore from my time machine backup?Â
Info:
iMac (20-inch Early 2008), Mac OS X (10.6.8)
I recently suffered the 'pleasure' of a HD failure in my 2008 24".An apple engineer replaced the drive and reinstated my data from time machine - all good so far. However, my mac doesnt want to relink with my existing backups and continue the save/delete old entries like before.I can still access my old backups, but It seems to want to create a new time machine on the very little space i have left on the drive for new backups.Is there a way of relinking to the previous backup or is it a case of wipe/restart, which i'd like to avoid.
I have the restore disc from my macbook pro and want to use them to restore an IMac. Is that possible? The disc say MacBook Pro 13 inch on it. Does that matter? It is safe to do?
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5) I have everything backed up on an external hard drive but I realized I left my snow leopard DVD at school (I'm home from college for the break). Is their a way to restore from backup without the disc?
Accidentally deleted address book and I don't have an install dvd/cd. I looked at others' answers and all I got was that you have to have the install disc. Are there any ways for me to restore my address book running mac os x 10.6.8 btw.
Info: MacBook (13-inch Mid 2009), Mac OS X (10.6.8)
I was thinking of doing a clean install of Snow Leopard. I back up via Time Machine to a Time Capsule. If I do a clean install, do I then just open Time Machine and then choose restore from the last backup or is not that simple.
I am running 10.6.8 on my MacPro (early 2008). I have 4 internal hard drives. The main boot drive has 10.6.8 and the secondary drive with a system has Lion. I cannot completely upgrade to Lion on my main drive until all my software is compatible. My main boot drive started acting like it's in slow motion 2 days ago. No matter what I do (DiskWarrior, Disk Utility, zap PRAM, fix permissions) nothing seems to work. Every mouse click or movement gives me the dreaded spinning wheel and it hangs for about 5 min and then does what it's supposed to do.
I have logged into a new account w/ no special 3rd party apps or utilities and it still does the same thing. Hard drive diagnostics say my hard drive is ok. I have tried reinstalling the 10.6.8 combo update but that hangs after a few minutes of starting. I thought about restoring a Time Machine backup from 1 day before this happened, but before I attempt a full disk backup, need to ask what to do so as not lose everything. I assume I must boot up from another disk or hard drive, correct? Can I simply select all the system folders and apps folder or do you think I should do a complete restore?
We had to wipe a laptop clean and somehow time machine seems to have backed up the user profile after deleting it, so our most recent TM backup does not have the essential user files on it. Is there a way to migrate from a previous backup to get the delted user account back?
My time machine backup failed last night. Tells me that disc cannot be repaired and to backup and reformat. But it wont let me copy anything off the disc it tells me that the operation cannot be completed due to the ownership of the volume not being set. I have tried changing the sharing and permissions but its permanently greyed out.
I have a 3rd Party NAS (Iomega Home Media Network Cloud Edition 2TB) and MacBook with OSX 10.6.8. I did run a first TM full backup over Ethernet (around 240GB) because of the extremely slow transfer speed over WiFi via the AirPort. It went Ok (after several tries and reading here in the forum). Then, I disconnected my MacBook from the wired network, so futures frequently backs-up happen wirelessly, however, it seems that it did not recognize the first full back-up, asked for re-doing it again from scratch and erased my first full-backup-over-Ethernet.
I've seen that the MAC address is used as part of the sparse bundle file name; obviously, there will be a conflict here because Ethernet and AiPort do not have the same MAC address (of course !).I will run a brand new full first backup over Ethernet, but I'd like to know what do I have to do for getting it recognizable for futures backups over AirPort?
I've got a Macbook Pro with Snow Leopard installed, but it has been going sort of sluggish lately so I've decided to do a clean reinstall of Snow Leopard to try and improve things. I've got an up-to-date backup with Time Machine to my Time Capsule. When I do a clean install of Snow Leopard, will I be able to easily restore the files that I want to keep and the applications that I want to put back on my system (with their settings)?
I upgraded to Lion and cannot access my Quicken files. I understand that I have to go back to Snow Leopard to export the Quicken files, but I don't see how to restore Snow Leopard from Time Machine. Or, how to boot up directly to the external drive?
Please take pity on a confused newbie. I'm running 10.4.11 (Tiger) on a 2 GHz Intel Core 2 Duo 13" Macbook with 1GB ram. My school requires me to run Bootcamp to take my exams. They told us that we need 10.5 minimum OS and must have our 'original system discs'. The installation dics that I have are for Tiger. If I buy an upgrade disc to Leopard/SL, will that contain the windows drivers I need to install after I install bootcamp? Or do I need to buy a full installation disc of Snow Leopard (since I think you can't buy the Leopard full installation anymore)? Another issue someone mentioned is that both Leopard & SL require 1BG ram minimum, which is what I have. I'm worried the os will run very slow, but I don't really have the money to buy new ram and get it install (and don't want to crack the fragile top case) now that I have to buy the new software too.
A baby managed to get its hands on one of my very important grey iLife restore discs. It appears to be severely scratched, though I do not have access to my mac at the moment to make check on whether it is working or not. Nonetheless, in an effort to salvage it, is there any way to make an identical copy for backup purposes? As in, rip the contents of the original DVD and then burn them to a blank DVD?
I am not financially prepared to pay some ludicrous price to get a replacement from apple, and would like to try everything I can before I resort to... other means of obtaining iLife.
I decided to restore to a Time Machine backup I had done a few days earlier, hoping that I would just "start" fresh. Without realizing it, I had inserted the Leopard install dvd that came with my computer, and restored to my 10.6.6 backup. I got the "You must restart your computer" error, which I found out was a result of using the Leopard disk. So, I redid the restore using a Snow Leopard installer on USB.
After this, everything appeared to be working fairly well. However, today, I've started to get system crashes quite frequently, and at times I haven't been able to properly shut down or restart. I noticed that Spotlight was indexing, and would hang at "3 hours remaining" or "estimating time left." Right now, I have created a second admin account, and I have disabled indexing. It seems to be working, at least temporarily, because I'm using it right now.
I have a 2007 Intel MBP, running Leopard. I purchased the family version of Snow Leopard. When I tried to install it, it just spins the disc for a minute, makes the noise like it's trying to read it and then spits it out. All other discs work fine with my MBP so I know it is not the disc drive itself. I have all software "up to date." My brother installed SL on both of his MBs, one newer than mine and one older, just fine (with the same disc). I haven't seen anything out there with this issue so I wanted to start a thread to see if anyone knows how to resolve this issue (beyond taking it back to Apple and exchanging).
How come I can run 64-bit Windows 7 on my first gen Mac Pro, but I can't run Snow Leopard as completely 64-bit (with the 64-bit kernel). What am I missing here? Is it truly a hardware limitation or is it just a software block that Apple has put on these machines?
I always thought that you couldn't run Snow Leopard 64-bit Kernel because of the EFI32. After installing Windows 7 successfully, it makes me wonder if the inability of running full 64-bit Snow Leopard is just an artificial limitation.
What's the deal? I could be completely wrong about all of this. I'm still confused about the EFI32 thing. Can someone shed some light on this?
I am trying to make a back up copy of Leopard on disc but the files don't show up when I insert the disc in my windows PC (running XP Pro). I want to burn a back up disc for my own purpose and unfortunately only have a dvd writer on my PC. Can someone advise please as I can't seem to find an option on my PC saying show hidden files etc, if that's the case?
... long time reader, first time poster!! So I'm doing it. I'm switching from PC to Mac. I've been waiting for a while now and the new MacBook Pro's have convinced me. I'm buying the 13 inch this week.
However I'm slightly worried about the upgrade to Snow Leopard in September.
My question is if I buy a new MacBook Pro this week and upgrade from the current version of Leopard to Snow Leopard will it be the EXACT same as the version of Snow Leopard that ships with new MacBooks after September?
Is the upgrade just the same as the full software version available post September? Does the upgrade it just detect if you have the previous software and installs as if it were the full? Or does it just "patch" things depending on what's different from previous versions?
I can wait till after Snow Leopard is released in September 09 if it is different to Leopard upgraded to Snow Leopard.
I want to return to Snow Leopard from Lion (love it) for personal reasons (family). Can I use the Lion backup to restore the Leopard preferences, etc? Or will I have to reconfigue the machine with mail, bookmarks, etc.
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
I have a mac book pro...one of the older models...around 5 or 6 years old..the silver one with the silver around the screen part. Running Mac OS X 10.6.8,
2.33 GHz, 2GB ram.Â
Lately my computer has been rediculously slow with everything, but aside from that my issue is with my start up disc. I would have over 1.5 GB of space left, open up a photoshop file...make some alterations and save...and all of a sudden I have NO SPACE left. These alterations created the photoshop file to be like 50mb more. Its a 200mb file. So how can I go from 1.5 gigs to saving a 200mb .psd file and all of a sudden 0 hd space?Â
Sometimes I couldnt even save the .psd because when I opened it all of a sudden I have half a gig now. And even if I had half a gig why wouldnt I be able to save? I go to save and sometimes it says "your start up disc us full" - Is this different than my harddrive?Â
Is photoshop using some sort of weird caching thing?
I was just wondering if a full system restore can be harmful or if it's good to do every once in a while to get that "fresh" computer feeling. I just re-installed OSX and everything feels like new but was just wondering if this is bad for the hard drive or something.
I have a disc full of photo's stuck in the disc drive on my imac. When I try to eject it, I get a spinning rainbow circle and have to do a hard shut down. It sounds like it is trying to eject it, but then gets hung up.
My G-4 startup disc is full and now the computer won't start up. I am told to put a startup disc in the drive and restart from it, but I cannot get the disc drive to open. I have tried everything, including copying over to external hard drive. I read that if you hold the mouse button down, the disc drive will open, but this hasn't worked.
My dvd drive is messed up and I am going to ship it to apple and was wondering if they can tell that i have a bootleg OS X Snow Leopard? If they can tell, do you think they would care?
