OS X Yosemite :: Disk Utility Won't Allow To Reinstall?
Dec 11, 2014
After then parade to Yosemite I ran into hard drive issues and my 2012 iMac will no longer boot but I ca boot to Internet Recovery. My latest plan was to do an OS reinstall to an external drive then try to recover items w/ target drive. In any case, when I choose reinstall OSX, it tells me I have to verify with Apple...OK...then continue....then it says select a drive to install OSX on but gives me no selection option? Just a blank white line? Both drives (internal and external) show up and can be accessed via disk utilities.
Info:
iMac, OS X Mavericks (10.9)
View 1 Replies
ADVERTISEMENT
Apr 8, 2012
I think i have lost my hard drive....when trying to run a disk utility or reinstall software, my hard drive is not listed. Does that mean it is gone? If so, is it expensive to replace?the notebook is about 5 years old".
Info:
MacBook
View 1 Replies
View Related
Dec 4, 2014
Disk Utility when I run verify says I need to reboot from the Repair Disk. I tried (twice) and it shows no problems. When I reboot normally, and run DU, I get the same error. Which result should I believe?? And is there a workaround? Using 10.10.1 / Air late 2011.
Info:
MacBook Air (13-inch Mid 2011), OS X Yosemite (10.10.1)
View 8 Replies
View Related
Dec 1, 2014
how do I repair disk using disk utility
Info:
MacBook Air, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Apr 23, 2010
I want to reinstall OSX but finder does not work and disk utiliy does not work and the computer does not see the dvd drive, when I boot and hold c it does not see the dvd and won't boot from it, is there any other way to do an install., it's the new imac 27" flat screen with core i5, 4GB ram, boot ROM version IM111.034.B00, OSX 10.6.3.
View 7 Replies
View Related
Jun 14, 2012
After backing up my data and then swiping my hard drive using Disk Utility, my OS seems to have been uninstalled as well. Is there a way to recover the deleted information and go back to the last working configuration? I'm on a MBP IC2D 2.16 w/ Lion.
View 3 Replies
View Related
Dec 3, 2014
I've run the disk utility verify disk several times and come up with an error (post title) indicating I have a corrupt HD and need to repair. I've rebooted with command R and run disk utility to repair the disk and it says everything is fine. Reboot to normal mode and verify continues to show the error.
Other info says the file system exit code is 8.
Info:
MacBook Pro (Retina, Mid 2012), OS X Mountain Lion (10.8.2)
View 2 Replies
View Related
Dec 1, 2014
I recently ran a ‘verify’ scan in Disk Utility as a precaution after Word crashed. An ‘incorrect number of file links’ error message showed up, as well as a prompt to repair this using Disk Utility from the Recovery HD. However, when I do a scan from the Recovery HD version of Disk Utility, no error messages or repair prompts appear.
My questions… Is this something to be concerned about? How can it be fixed? Would it be best to do a clean install of OSX? I only lost a little bit of data so I was pretty lucky.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1), Disk Utility
View 2 Replies
View Related
May 8, 2012
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
Info:
MacBook Pro, Mac OS X (10.7.2)
View 1 Replies
View Related
Oct 7, 2010
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
View 2 Replies
View Related
Nov 25, 2009
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 24, 2014
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies
View Related
Jan 2, 2010
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
View 1 Replies
View Related
Oct 9, 2010
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
View 8 Replies
View Related
Feb 28, 2009
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
View 5 Replies
View Related
Jan 9, 2010
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
View 7 Replies
View Related
Aug 3, 2010
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
May 15, 2012
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 12, 2014
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Feb 22, 2010
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies
View Related
Apr 30, 2009
I am having an issue Partitioning my Internal HDD because some files cannot be moved it was able to Partition a while back when Installed Vista but I deleted that Partition as I needed a bigger one for Windows 7 Beta It says I need to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume." does that mean I have to reformat my entire HDD? as I don't want to do that.
View 1 Replies
View Related
May 26, 2009
I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
View 8 Replies
View Related
Sep 7, 2009
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies
View Related
Dec 2, 2009
I have a problem with Disk Utility , when trying to format an external fire wire drive.
I cleaned out the drive and proceeded to erase it with zeros. After this Disk utility will not display the subdirectory or verify, repair, partition, erase the disk. The main disk name is still visible, but I cant access any functions.
Error message says input output error.
DiskWarrior will not help, as the original directory is beyond recovery.
I suppose that I have damaged the original directory, and now I would ask the honourable forum if there is any remedy for my actions?
View 7 Replies
View Related
Apr 27, 2010
If I want to make a bootable clone of my boot drive onto an external FW hard drive which I can restore from if my internal boot drive becomes corrupted, do I need 3rd party software like Carbon Copy Cloner, or can I just create an image of the boot disk in Apple's Disk Utility and save that to the external FW hard drive?
Apart from incremental updating, what is the difference between these two methods in terms of being able to restore my computer to a previous state with all my applications installed? (I keep my data stored on a 2nd internal hard drive and am happy with manually backing this up to another external HD). So my reason for wanting to make a clone of my boot drive is so that I don't need to waste time re-installing all of my applications from DVD...
View 2 Replies
View Related
Apr 6, 2012
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies
View Related
