I just discovered that even though external drives can be backed up with Time Machine, Time Machine won't let you restore files from them if they fail. You can only restore files from a secondary drive if that drive is mounted, which is impossible if that drive has failed.
[URL]
[URL]
I have an external HDD that just failed. It was one of the HDDs that has been regularly backed up with a bigger HDD that backs several HDDs using TimeMachine. I can't seem to see the method for restoring the drive data to a new drive?
The computer is a 2.44 ghz iMac running 10.5.7
Since the harddrive of my IMac was full, I added an external harddrive to the system for my photos. I use another external harddrive for time machine back-ups (backing up both the IMac and external harddrive with my iPhoto libraries). Recently the EHD with my photo libraries crashed. I now want to restore it from time machine onto a new external harddrive, but am not quite sure how to do this.
Info:
iMac (21.5-inch Late 2009), OS X Mountain Lion (10.8.2)
Had hd failure, replaced drive, restored time machine BU. Bu completed successfully. Most programs fail immediately.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
Tried to restore my address book (10.7.3), but I terribly failed. What files do I actually have to restore? Tried the all the metafiles (library) and both com.apple.addressbook.plist, but no success.
Info:
PowerBook, Mac OS X (10.7.3)
We just came back from vacation 2 days ago; I checked time machine. It says latest backup is delayed; then latest backup failed; next backup when disk is connected. I have a WD external hard drive. I check to see that it is connected to my IMac and is plugged in for electricity. Restarted my imac - same problem. There is no lite on the WD; does it mean it died? Or what can I try? It is less than 2 yrs old.
View 2 Replies View RelatedTime Machine reported it failed backup due to the shortage of disk space. But I see the total space of partition is 192GB，the whole backup snapshot estimated is 177.56G.Â
The massage said that " failed backup, 52.85 GB is needed for backup but it's only 25.17 GB available." Â
I know it's 166.35GB of ancient snapshot still exist, but why not OSX to delete it automatically and release more space for new snapshot?Â
By the way, I can't delete those ancient snapshot in Finder manually, perhaps permission denied.
Info:
MacBook Pro (Retina, 13-inch, Late 2013), OS X Mavericks (10.9.4)
What can be done if Time Machine failed to save certain data to external hard disk, but I do have the old hard drive? I have a new IMac 10.9.2. The old IMac was hit by lightning/surge. Restored data from external LaCie disk but some information is missing. Apparently Time Machine did not save it to the external disk, or we just can't locate it. We do haves the old hard disk and will put it in a box to be able to access it.
Is partitioning the answer?
I would like to use time machine for my laptop on 2 HDDs, so I can keep and off sight copy. Alternating the drives to provide maximum back-up security.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
I have had Time Machine configured to back up my photos and videos on an external drive. My Time Machine backup is a separate drive attached to my MacBook by FireWire. I have Leopard OS. I have in the past successfully retrieved deleted photos from the Time Machine backups using iPhoto.
Now, unfortunately, the external drive with the photos and videos has developed a problem (possibly power-related) so that my MacBook no longer recognizes that drive. Obviously, this means that iPhoto can't find/open that photo library. Which means that iPhoto can't access the backup via Time Machine. The photos must surely be on the Time Machine backup but I can't figure out any way to retrieve them.
I recently erased my Mac partition of my hard drive and got a fresh copy on mavericks. I did this believing I would then be able to restore any important backed-up files later, now all I get in time machine is this:Â Â Â
Everything is greyed out apart from all my files and it stays like this for about five minutes. I know all the data is on the hard drive as it says 250GB of data is on it. Is it just searching through the Hard drive and I need to give it time for the files to show up?
I couldn't fine the Logic Pro X file titles "I still get letters", so i went to Time Machine. I wasn't able to find it until i searched for it. The only problem is it shows the file, but no path and if i restore it, nothing happens. Am i doing this wrong or is my file lost forever? Ill attach a screen shot. (A lot of the files on my time machine just show up white like that)Â
Info:
Mac mini, OS X Mavericks (10.9.4)
if my MBP hard drive go caput, can I use Time Machine with an external drive to restore my MBP if I need to get it a new HD?
View 2 Replies View RelatedI've been using some external HD (4Tb) to backup both my Mac and some other external HD's.Now one of my external HD is not working and I can't restore the backup of that HD simply because that HD is not showing when I open the Time Machine Finder. Any ideas?
Info:
Mac Pro, Mac OS X (10.6.8)
So my hard-drive died. Luckily I have a Time Machine backup of my system. I bought a new HD and tried to restore from the backup. No-go. It complains that it can't restore certain file, so it snorts the restore. I tried an older backup, no help.
So I decided to do a fresh install instead. But once I have OS up & running again, can I restore files from my old Time Machine backup? How does the process work? I'm afraid if I point Time Machone to my old backup, it will overwrite it.
I do have my files backed up manually as well, so I can always copy them by hand. Bit that backup is not as recent as the TM backup.
I'm trying to go back in time machine to when I had Leopard, but it won't let me, all those options are listed, but are grayed out. I can choose to go back in time to the days TM has backed up SL though?
View 12 Replies View RelatedWhen installing OS X I always try to cluster the OS related files at the outer tracks of the hard drive, where the disk is fastest.
(See http://macperformanceguide.com/Stora...anYouNeed.html)
So I generally like to install OS X to an empty hard drive, and be done with all the OS related updates before I go on to install applications, copy user files etc. Most of the OS related files (depending on need for future updates) will now be clustered nicely together, making the machine as fast as it can be.
My question is: Does Time Machine "respect my efforts" here when doing a full restore? Will it place my system files at the outer tracks where they belong, or will it ignore the original placement of the files?
apple is sending me a replacement UMBP. I'm keeping the current one until the replacement arrives and then using a time machine backup on the new one. My time machine backup will restore the new laptop with all the old laptops files, programs, preferences, emails, everything as the old laptop's drive was without having to reinstall everything? Correct?I guess I could always swap drives as well, that might be quicker.
View 5 Replies View RelatedI've had a new hard drive installed on my iMac, (and the place that did it for me also installed 10.6 OS). Now, when I plugged in an external hard drive I had been using with time machine (and OS 10.5), and clicked 'restore' in the time machine interface, it transferred 200+gigs of data onto the new hard drive. However, I can't see any files anywhere - only see that that much space is now taken on the new hard drive. I've since read elsewhere that I should have used 'migration assistant' to do the job, but before I do this, I what to get rid of the 200+gig of data taking up room. How do I do this without a fresh install of the OS? (I don't have disks for 10.6). Or will the time machine restore (with migration assistant) not work between 10.5 & 10.6?
Info:
iMac, Mac OS X (10.6.8)
I've restored my Mac OS x (10.6.8) from a time machine backup after reformatting the iMac's hard drive.After restoring all my files the external drive that time machine uses is locked and I cannot seem to get it to unlock itself. I've tried resetting the permissions on the "get info" panel without any success (Did a restart after every change- it just seems to go back to custom priviledges). I've also toggled the "Ignore Ownership" toggle on and off- again followed by a restart each time.Â
The external drive is connected by Firewire 800 and is a RAID 1 configuration using two 2Tb drives.I don't want to lose my existing time machine files on that external disc- hense formatting it is out of the question..Â
Info:
External drive & Time Machine, Mac OS X (10.6.8)
I ordered the $29 upgrade online. I was wondering if I could do a hard drive format and fresh install then restore my photos and documents and mp3s from my Time Capsule using Time Machine. This would probably free up even more HD space and make the OS cleaner and fresher, no? Would this be possible?
View 12 Replies View RelatedI was doing a major cleanup with an external Seagate USB HDD due to low free disk spaces. It has two partitions/drives: FAT32 (using it for on other non-Apple machines like Windows 2000 SP4) and HFS [Time Machine only]). I threw about 30,000 items (copied from an old Windows 2000 SP4 machine's HDD with NTFS back a few years ago) from FAT32 partition/drive into the trash can. However, I am having problems emptying it.
Most of them were emptied, but some were left behind. This four years old MacBook Pro's Mac OS X 10.5.8's Trash dialog boxes said "The operation cannot be completed because you do not have sufficient privileges for some of the items." and "Emptying the Trash cannot be completed because "<filename>" is locked. To empty everything in the Trash, including locked items, press the Options key while selecting Empty Trash".
[URL] for the screen shots/captures of the error messages. I tried holding Option key and emptying trash, but that didn't work. I used Finder to look at the files, and they had locked status. So I unlocked them which worked, but I can't delete the empty folders/directories, and these don't have locked. What's going on and how do I empty the trash?
Info:
MacBook Pro, Mac OS X (10.5.8), 2.4 Ghz; A1260 model; 15" size.
I've tried getting some answers to this from Apple support forums and my local mac forum but didn't get much info... I've removed some important language files while using monolingual (namely -English (American) -English (British) not realizing these are subset and required). I should've read the FAQ first... now some programs are appearing in weird character formats. Can I restore these language files with my Time Machine back ups? Which folder would I need to replace back with previous file? Since I did this only late last night, I should be able to just replace a certain system file folder, without causing much headache
View 1 Replies View RelatedI have an early 2006 iMac with 10.5.8, and I am having hard drive problems. I want to reformat my drive, then install 10.6. Can I do that, then restore my files with Time Machine? Will it restore applications?
Info:
iMac 17" Intel Core 2 Duo 2.33 GHz 2Gb Mem, Mac OS X (10.4.8)
I store all of my photographs on an external hard drive which I backup with my Time Capsule. My external HD crashed and I need to restore the new external hard drive with the files from the Time Capsule. When I open Time Machine I get an error message saying to connect to a current Time Machine backup disk.
Info:
MacBook & iMac, Mac OS X (10.0.x)
How do you restore your itunes music folder from time machine back-up to an external portable hard drive?
Info:
MacBook Air, Mac OS X (10.6.8)
I have a Macbook Pro 13.3" running 10.6.4. I've had this computer for a year now and I have always wondered. Can my 500 GB Toshiba Hard Drive be used for Time Machine and for storing files at the same time?
I've heard about partitioning it, but will that delete the files on there? I dont have enough space on my hard drive to backup my external HD.
My Time Machine external drive is flaky so I'm replacing it. What I did was copy my backups folder to my iMac's main drive temporarily because I was unsure of the process. Will I be able to move that folder to the new drive and restore Time Machine or not? If there's another process, please advise me. I don't trust the old drive another day, its working intermittently and making clicking noises of death for a week now. BTW, how many are using USB vs FireWire for a Time Machine Backup Drive. Would a FW (for whatever reason) drive be more reliable than a USB one? Or vice versa?
View 4 Replies View RelatedI would like to copy the data I have in my time machine to another external HD so that I have two backups; one I can store offsight and one I can have connected to my computer. Can this be done and if so, how does one do it?
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
How long should I be stuck on the screen "calculating space required to restore data"? I've been on this screen for about 20, 30 minutes. The "hash mark wheel" is spinning, but just not seeing anything new. Is this normal? My backed up data is ~100 GB.
View 1 Replies View Related
