Before I upgraded the V220 USB mouse was recognized automatically whenever I plug in the USB receiver.
After I upgraded even though the mouse is recognized by the Logitech Control Center software, the mouse does not work, as in moving the mouse does not cause the mouse pointer to move.
I use a MacBook Pro. Anybody has the same experience?
I'm looking to maybe replace my mouse, and I quite like the look of the Logitech G3 mouse, mainly because it looks like the same design as my trusty Wheel Mouse, but with a couple of side buttons added. The problem is that according to the Logitech site, the software is PC only, but I assume that the standard left/right/middle buttons and scroll work as normal. I've read in another post here about the MX518 that although the extra buttons on that mouse can't be programmed in the control panel (except for expose?), they work fine in other applications (World of Warcraft was mentioned, and it's that I'm specifically interested in).
So, anyone actually used one of these mice? Or should I just get the MX518?
A large portion of last month for me was spent looking for a decent wireless mouse, and I was pretty hell bent on avoiding a dongle so I went for Bluetooth. In that time, I went through three mice:
Kensington Slimblade Trackball Mouse
Logitech V470
Razer Orochi
While the Kensington worked mostly fine, the profile was really uncomfortable and the audible clicking noise from the trackball was insanely loud and drove me batty, so I returned it.
The latter two both had the same issue; lag. They lagged, badly. After less than five seconds of being idle they would go to sleep, and when you tried to move them they would jump across the screen. Sometimes they would ignore input entirely.
After some research, I learned that this is pretty inherent in the nature of Bluetooth, and only a select few vendors manage to make mice without obvious lag issues. The Kensington had only a bit, and most Apple mice have minimal BT lag as well.
At this point, however, I was done with trying Bluetooth mice. The increase in power consumption and lag was not worth the lack of a dongle. So I went looking for a mouse with a tiny USB dongle, and found this:
The receiver is really, really small. It's also part of Logitech's unifying series, which means you can pair up to six devices to it, if you have them.
source: [URL]
I've been using it for about a week now, so here are my impressions of each of its features.
First, let's talk about the dongle. I seriously haven't thought of it since I put it in. 99% of the time I'm not using my USB ports for anything, so losing the port doesn't really hurt me in any way. The response time is amazing. I have to leave it for like a minute before I notice any lag upon moving it again, and even then it's pretty much unnoticeable. It's usable within half a second of turning it on and after that it's pretty much smooth sailing.
The mouse includes Logitech's Darkfield technology, which is pretty cool since it will track on just about anything except for a mirror. So, uh, those of you with mirrors for desks are still out of luck I guess? It works on glass that's 4mm or more thick, though!
The scroll wheel is quite cool. By pressing on the scroll wheel it can switch between click mode and free mode. The click mode works like every other scroll wheel you've ever used, it clicks when you scroll it. The free mode is quite impressive ... when you flick it, it's basically frictionless. You can use this to scroll through large pages very quickly. I can't help but liken it to the Magic Mouse's momentum scroll, except this is actually physical momentum.
As a useless sidenote, I managed to get it to spin for roughly twenty seconds!
You can also tilt the wheel left and right to scroll horizontally. Considering that you generally don't need to scroll horizontally incredibly often, I find this works very well for what it is. It certainly isn't as slick as the Magic Mouse's 360-degree scrolling, though.
The button behind the scroll wheel defaults to Expose, and there's front and back buttons under your thumb that are Forward and Back. Using Steermouse, you can program these buttons to do whatever you want them to do in whatever App you're using.
The build quality feels great. The sides have a rubber grip for comfort, and the body is made of a soft-touch plastic which, while not as deliciously suede-like as the Razer Orochi, is very comfortable all the same. The scroll wheel in particular feels like a real piece of machinery.
It takes two AA batteries. Um, yeah. Use rechargeable, they're cheaper in the long run and better for the environment!
Now, I know I've touched on the comparisons to the Magic Mouse earlier, but let's get more in-depth. First off, why would I bother to compare them? Well, I imagine most people looking for a mouse and own a Mac are going to jump to the Magic Mouse first, but I'd urge them to reconsider. Just because Apple makes it does not make it the best option.
The Anywhere Mouse MX is technically a notebook mouse (they make a desktop version, the Performance Mouse MX), so if you're considering it at all you probably have a Macbook. In which case, I'd be willing to come right out and say the Magic Mouse is completely useless to you. It has a few of the features your trackpad already has, but is missing a lot of the best ones. The lack of an Expose function in an Apple mouse should be criminal. Even the Logitech has this, and as maybe the most-used function of OS X -- for me, anyway -- not having a dedicated way to access it is unacceptable. If you already have the glass trackpad, the Magic Mouse really offers you nothing except the fun of pushing it around your desk.
Other standout features of the Magic Mouse:
360-scrolling: OK, yeah, the Magic Mouse wins this. The ability to scroll diagonally is awesome. I hope to see other mice incorporate this. However, the Logitech is able to scroll in every direction well enough for pretty much every task.
Um, right clicking: The Logitech does this shockingly well!
Back and forward: Surprisingly enough, pressing thumb buttons is significantly more comfortable than contorting your hand into a claw-like thing. Well, OK, you can simply lift your hand off the mouse to do these gestures, but that's bad too. Why have to do this at all? Apple's aversion to buttons strikes again.
Aesthetics: Make no mistake, the Magic Mouse is beautiful. I'd be lying if I said the Logitech is nearly as striking, but I think it is a good looking mouse in its own ways. I'm certainly not embarrassed to have it in my fashionista hands.
When comparing the ergonomics of the devices ... I mean, lots of people have tried to argue that the ergonomics -- or lack thereof -- of the Magic Mouse are a good thing, but it really reeks of justifying a problem after the fact. The Magic Mouse is not meant to be held by a human hand. Judging from its design, it is meant to be cradled by an oversized, inverted spoon.
And the dongle ... well, you saw it. It's tiny. It may bother you. It doesn't bother me.
I think that's really it. In the case of a mouse, physical, programmable buttons and an ergonomic design are really more important than gimmicks and superficial beauty. The Magic Mouse is a great concept executed poorly, and the MX series is a great concept executed greatly. Seriously, consider picking this up. It's the first mouse that's been able to pry me away from that beautiful, giant, silky trackpad.
I have a mac mini running lion server.I have a couple of mac clients (notebooks). I have to enable mobile accounts so notebooks will work when traveling.However, I want family to logged into server as well. I am still in testing, and I think I have client side working ok (sync on demand, sync logging in and out)However, when user now logs directly into server (or anything else that would cause a sync, manual sync or logging off), it causes errors. It appears it isn't smart enough to know it is trying to sync back to itself.
View 1 Replies View RelatedI'm trying to get a Logitech G5 USB corded mouse to work with Mac OS 10.3. The strange thing is that the mouse pointer moves on the screen fine, but the mouse buttons don't register at all.
View 5 Replies View RelatedThe thing is that Logitech G9 Mouse doesn't have MAC supported drivers provided by the manufacturer and that leads to most of the delicate functions of the mouse not being available. (e.g. Side mouse buttons 4 & 5, DPI changing +/-)
Logitech Control Center (LCC) for MAC does not let you configure it at all of course either. (since it's not even recognised/available)
So after reading a few posts about the matter...it turned out that you "should" normally be able to configure all the mouse's basic buttons (apart from DPI changing) with "SteerMouse".
But even after using that program my Side Mouse buttons number 4 and 5 were not even recognised (using the program a bit urselves should give you a clear idea of what i mean). I even used the "reconnect" button several times (button used for exactly such occasions), unplugged and plugged-in again the mouse, restarted MAC but with no effect...
If anyone knows what could be wrong then i would be more than grateful to hear some possible solutions to the problem.thank you in advance.
P.S. No i m not using "USB overdrive" at the moment and it's 100% certain that it is unistalled completely.
After 2 days of playing around with the new apple keyboard and mighty mouse, I thought, that's enough, and connected my logitech keyboard + mouse.
The keyboard is a big improvement, it has both windows and apple keys on it, and has a lot of extra features, like for example being able to press the 'print screen'. Even the mouse seems to work better, could ajust to the right clicking of the mighty mouse, sometimes it works, sometimes it didn't.
One think I'm still looking for is how to disable the display of widgets when you press the mouse wheel. I tried steermouse, it lets me configure the mouse wheel click as third button, but that doesn't change anything, I tried to run LCC (Logitech Control Center?) but it only showed me my keyboard.
I know how to change the keyboard shortcuts, but can't find the mouse shortcuts?...
I've been using a Logitech G7 mouse w/ USB Overdrive (and now Steermouse). I have an issue with the mouse double-clicking when it's supposed to single-click. It does it randomly throughout the day.
I tried testing my original Apple Bluetooth Cordless Mouse (not the MM), it works fine. No accidental double clicking. The G7, in Windows, does not suffer from this problem. I know the G7 isn't "supposed" to work with OSX, which is probably the reason why it's doing this in the first place, but I have seen other readers install USB Overdrive and Steermouse without issues.
Is there a way to go to default OSX Mouse drivers? Maybe all these installs of 3rd party apps screwed something up. I don't know, just a guess. If anyone has any info on how I could go about fixing this issue, let me know.
I just bought a Logitech MX Revolution wireless mouse for my Mac Pro running Leopard 10.5.6. The mouse functions, but the Control Center application (LCC) does not recognize the mouse, hence I can't program the buttons. I've have tried every combination of uninstalling and re-installing with the same results. Here's what I get when I run the LCC from System Preferences:
I own a license for Steermouse, but you'd think for $80 they'd get the drivers working. Anyone have the same experience and find a solution? I also have a ticket in with Logitech, but I keep getting broad spectrum form responses.
Logitech Anywhere Mouse MX:
[URL]
Anyone got one yet? Care to share your thoughts on it? Particularly interested in how it compares to the Logitech VX Nano, which currently is my favourite mouse by far...
PS - For those interested in the Logitech Performance Mouse MX, there's this thread
Just got the Logitech Performance Mouse MX. Awesome mouse, if anyone is in the market for one. Fits my hand perfectly.
As many of you probably know, Logitech's Control Center is horrendous. Heck, it doesn't even run in 10.6.
So, what do yall use to program your mouse buttons? USB Overdrive is no longer being updated and I have heard it's pretty buggy, and for whatever reason, I couldn't figure out Speedmouse. I may try reinstalling it one more time but, I was wondering if you all knew of any alternatives.
Does Logitech only have one bluetooth mouse?
View 5 Replies View RelatedSo here's what happened: I had a MX518 that I got for my iMac, and then I found out that it had no drivers for OSX, so I ended up taking it back, and exchanging it for MX400. MX4000 has OSX drivers, but the wheel is awful. Each time I press the scroll wheel (which feels like it needs a bodybuilder to be able to press it), the thing tilts either left or right, causing it to not only activate the middle button, but also a left/right wheel button. This is very annoying.
I'm wondering if anyone here is using software such as USB Overdrive like the one found here (URL) I mainly want to run it on MX518, and was wondering if the dpi switch buttons still work with it after it's installed on the system.
what is the best software that supports Logitech G9 mouse? it has 2 side buttons and the scroll wheel is also another button.
View 6 Replies View Relateddo you know if this mouse works on Mac computers(leopard)
So I'm looking at buying a new mouse, and the Logitech MX-1100 has me very interested. A couple questions though;
1) Are the DPI buttons customizable in OS X through the Logitech Control Centre application? Does SteerMouse or even USB Overdrive recognize these buttons for customization (I don't care too much about dpi settings).
2) I've noticed in some stores the mice on display often time have the scroll wheel spin completely without any clicks, you can literally spin the scroll wheel and let it glide for a moment. But there are others that click with each push and don't spin. Are the ones that spin freely defective or something? What gives? I prefer the free spin, since its completely silent (like the Microsoft mice) but something is throwing me off here.
what software do i need or is there something i need to do on mac, im new to the mc. Im just trying to get the left two keys on my mouse to substitute for my lack of a numpad. and maybe get the middle button as well to be numpad#3
View 1 Replies View RelatedI like this mouse, but may return it: for photoshop retouching it's maddening! I'm wondering if I got a defective unit, but I doubt it. Speed feels fine, but it gets erratic.
If anyone has one, maybe you could try this (in Mac OS X): with DPI set to the middle ("normal feel") option, try to move the arrow in small circles, about the size of a dime on the screen. Slowly. Gradually get faster. Does it do any little movements that aren't what you wanted?
Mine skips every few seconds (darting ahead a few mm suddenly) instead of moving smoothly. Enough to ruin any kind of drawing or retouching, which my Apple mouse handles fine. (It's not so noticeable for broad UI actions, which is why I didn't catch on at first.)
I retested against my bluetooth Mighty Mouse, and the Mighty Mouse does NOT skip in that way. I also tried multiple surfaces. Mighty Mouse is always fine, G5 is not. (It's not just a different "feel:" the mouse jumps erratically, several pixels at a time--and only sometimes..)
I also tested my 10-year old Intellimouse--it doesn't skip either. And I tried different mouse speeds in System Prefs: the G5 skips at anything from the slowest speed to the fastest. (I also tried the other DPI settings on the mouse--they skip too, but it's harder to test since those speeds are so far from normal mouse usage.)
Anyone else see this?
I got a gaming-grade laser mouse for precision, but if it acts like this, then I'll have to return it. Maybe it's only OK in Windows?
i have a very good mouse logitech MX Revolution that i like very much so that I have bought another equal.
I have bought the second because, since some weeks, the first makes sometimes the double click with the left button instead of the single click.
The problem now is that I have to change the usb receiver too (it seems they are not compatible each other) but doing this all the Logitech SetPoint setting will reset.
I was arguing if there is a way to export the SetPoint settings and import again with the new mouse; it would be a useful backup for the future in case of Pc or mouse changing or variuos problems.
I could write them on a paper and insert again but it's long and unconfortable because there are a lot of button with a lot of function.
Is anyone of you able to import-export the setting?
I just set up bootcamp on my iMac and windows is working great. The only problem is I cannot get back into OSX. I left my apple keyboard at home, and am now using a wireless logitech keyboard and mouse. When I boot up my computer, I hold down the windows key 'option' when the grey screen comes up, but the options of what to boot never comes up. What am I doing wrong? And if its because I need the apple keyboard, is there any workaround? I'll be stick in windows for weeks if thats the issue.
View 8 Replies View RelatedJust got this mouse and love it so far. Has a much better feel than the mighty mouse and many more options.
To those who use this mouse, what settings do you set yours to.
I just swiped a Logitech MX 620. Although the basic mouse functions work, I can't get "Logitech Control Center" to find my mouse, so I can configure the buttons. Anyone help?
View 6 Replies View RelatedLast night I had to do a forced shutdown of my PowerMac, and when I booted it this morning, myLogitech wireless set was no longer recognizedby the system. So far I've rebooted (a fwe times) with the receiver plugged directly into the tower, and uninstalled / reinstalled the Logitech "control center" software.
View 1 Replies View Related im currently going into high school, and one of the things that you need is a wireless mouse with a usb dongle.Now, i saw something about the microsoft arc mouse somewhere, and decided i wanted to get that.they have it for 32$ on amazon which is a pretty good deal considering its 50 at best buy and 40 at walmart.com
but, when i was looking on best buy's website for the arc mouse, i saw that they had the mx 1100 for 30$, and it looked like one of those fancy looking gaming mouses or whatever
now, i have to choose, so im gonna ask you which one is better.i don't care about batteries.i get mine from costco, and they r super cheap. recharable would just add more hassle because i would most likely be taking from and to school every day so that little space the arc mouse has to store the dongle is defenitly a plus.
or, are there any other good-looking, good preformance mouses for less than 30$?i really don't need the extra programmable buttons, the mouse is just basically so we don't have to use the trackpads on the laptops like maybe for some basic programming or something.
How do I remove Logitech mouse drivers on my MacBook Pro?My OS are Mac OS X Lion 10.7.2
Info:
MacBookPro, Mac OS X (10.7.2)
my logitech cordless mouse not working after installing 10.7. I think some kind of update is required but I can't figure it out.
Info:
Logitech cordless mouse V470, Mac OS X (10.7.2)
My recently bought Logitech G5 'Gaming' mouse is no doubt a fantastic mouse. But everytime the CPU (Late 06 MBP) is doing something intensive, even if it's just one of the cores. When the mouse is moved, the pointer will skip to a random spot a few inches away on the screen. This happens over random intervals (from 2+ seconds).
Sure it's not so bad when I'm firing up VMWare and it skips around because response time isn't vital. But i'm playing games with it, and well, in WoW that means you run off cliffs and miss the potion, and becomes a major PITA.
I know the first version of the G5 (the rust coloured one) had similar problems. But apparently the new blue one (the one in question) is fine. The surface I'm using it on is a heavy sheet of cardboard (backside of a notebook).
Anyone else have this problem? And what does logitech do in these cases? I rang up tech support and got hung up on. Or do I need to go to the guy I bought it from?
EDIT: after running 'yes > /dev/null', it might not be totally CPU related, maybe the GPU has something to do with it. In any case, I'll be playing in another account to see if the problem arises there.
does anyone currently use a Logitech Bluetooth MX900 (optical) with their MBP? I can configure the buttons fine, have no connection issues etc. But the pointer movement is quite jerky. It seems acceptable when swinging it about the screen. But when trying to do accurate tasks like click on a small button, it feels as if it is dragging. I have the tracking speed almost maxed out but reducing it doesn't really affect the dragging sensation, although it does smooth out the jerky movement. I've tried another cheap USB optical mouse but it's the same, jerky situation. I also tried a mouse mat but this hasn't helped either.
I'm assuming this is to do with lack of Logitech OS X support - The mouse works flawlessly under windows, however I think I remember a similar issue with Ubuntu. I'm baffled why the generic USB mouse was no different tho!? Is this just general OS X mouse acceleration?
Just bought a bluetooth logitech mouse (V470). It's cool and fair for what I paid, no complains there. But I got a question about the Bluetooth on Macbooks. I have the Early 2009 model Macbook White. How less is gonna last my battery fully charged with WiFi On and Bluetooth On all time? Obviusly I'm gonna turn off BT when I'm using the trackpad, but just to know.
View 1 Replies View RelatedSo I've got three Logitech mouses:
MX 510
MX 518
MX 1100 (wireless)
I used to own the Logitech S530 keyboard/mouse combo as well. What I've noticed is this (and it drives me insane). Both my 510 and 518 move perfectly, as in, its the same consistent movement, whether its fast motion or slow with the mouse. The MX 1100 has the same 'issue' as the S530; the control is god damn weird. Moving across the screen quickly feels like there's some kind of 'smoothing' (kind of like in some games where it would enable smooth mouse), and I just can't get used to pressing on onscreen buttons and such that require a bit more precision, because slowing down mouse movement gives me completely different control.
For example, if in photoshop and using the lasso tool to precisely cutout an object, it completely screws me up, because a slight jerk will send the mouse flying, there's no 'in between' it seems, and there's definitely no consistency. Both the 510 and 518 (gaming mouse!) have the same speed no matter what the situation. Is there any way to have any of the Logitech Wireless mouses behave the same as my other two? Or is this a technology issue with the internals? I keep going back to my wired mouses.
