OS X :: Move Existing Time Machine Backup To New Volume

Mar 4, 2009

I have been backing up my computers to an external HD with Time Machine for some time, but I just bought a 1Tb Time Capsule today. Is there a way to move/copy my existing TM backups to the new drive (in the Time Capsule), rather than starting a whole new backup, so that I can preserve my existing TM 'history'? I could just start a new backup, but it would only back up the 'current state', and I would lose all the prior data.

View 1 Replies


ADVERTISEMENT

Software :: Time Machine Unable To Perform Backup / Backup Is Too Large For Backup Volume

Oct 26, 2008

I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.

Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)

The Time Machine error is: Quote:

"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?

View 3 Replies View Related

OS X :: New MBP And Existing Time Machine Backup

Nov 16, 2009

So I've just got a new MBP to replace my three year old model. I have a full external HDD with Time Machine backups on it going back in time. WHat I'd like to do is to have the new machine use the same disk for Time Machine backups, and to just carry on appending data - so that I can enter Time Machine from the new MBP, and see all of my old backups. I haven't migrated a TM backup onto the new machine, as I wanted a 'clean' install. When I connect the existing TM drive to the new machine, it doesn't recognise that the machine is full of backups - is there a way around this?

View 1 Replies View Related

OS X Mavericks :: How To Move Existing Time Machine Back Up To Network Drive

Jun 28, 2014

move my existent time machine back ups from a external USB hard drive to a WD MBLD network attached storage.  

What I have tried to far:   Created the a new time machine back up using the MBLDSelected the option to replace the existing time machine back up and selected the encrypt optionStarted a back upStopped it right after it started Turned the time machine offMounted the sparsebundleRemoved the backups.

backupdb folder from itAttached the old time machine disk to my macbook airCopied the backups.backupdb from there and tried to paste it on the NAS drive using Shift Option Command V.Got an error saying "the volume has the wrong case sensitivity for a backup" 

View 2 Replies View Related

OS X :: Time Machine Won't Recognize Existing Backup?

Nov 22, 2007

I'm having a perplexing issue with Time Machine. Time Machine (the app) recognizes all the backups made to its drive; however, System Preferences doesn't recognize the last backups and won't make automatic backups to the drive. When I try to force a backup, it starts an entirely new backup (as in, separate folder and the whole system).

I just want Time Machine and System Preferences to recognize the backup that I've been running for weeks.

View 3 Replies View Related

OS X :: Use Existing Time Machine Backup With New Computer?

May 24, 2010

I just got my replacement macbook pro, and copied all my data over to it. When I went to set up Time Machine, I noticed that by default, it wants to create a new backup sparse bundle. Is there any way to either use the prior one or merge the old and new ones together? Rant:I find it crazy that getting a new computer means losing 18 months worth of backups. I called Applecare about this, and their responce was create a new backup and then if you need to you can connect to the old backup in a read only mode. The guy on the phone made it out like this is the best way to do it, new computer - new history of backups.

Why is this better? I mean, the time machine file i was using was 550GB of data. My home folder is 400GB of data. So that means to backup anything new (which for arguments sake, we'll say is 15GB) I also have to backup the other 385GB. So now instead of the total backup size being 565GB it is 950gb - 385GB double backed up.This seems like a very amateurish method of implementation, as if the easiest way to program the backups was new computer new backup. The path of least resistance is not the method of best backup solution.

View 5 Replies View Related

OS X :: Time Machine Not Working / Backup Is Too Large For The Backup Volume

May 23, 2009

Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."

Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.

Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.

Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?

This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.

I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!

Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???

Some quick screenshots:

View 4 Replies View Related

OS X V10.7 Lion :: Have Time Machine Overwrite An Existing Backup Instead Of Making Excessive New Backups?

May 28, 2012

Is it possible to have Time Machine overwrite an existing backup instead of making excessive new backups? If not, is there a way to control when Time Machine preforms its backup task so as to not make excessive backups?

Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)

View 5 Replies View Related

OS X :: Time Machine Error - Backup Volume Is Read Only?

Nov 15, 2007

Time Machine has been running fine for a week now. Suddenly, today, I get this error message:

The Machine Error

The backup volume is read only.

To select a different volume, open System Preferences and choose Time Machine.

I didn't change anything to make it read-only, and it's far from full.

View 24 Replies View Related

Applications :: Time Machine Cannot Find Backup Volume?

Feb 20, 2009

I just got my Mac back from a repair at the Apple Store. I was very excited to have everything back. However, Time Machine cannot back up! The error given is that the backup volume "cannot be found."

I've tried rebooting, remounting the drive and doing checks on it. Everything checks out. I can even write and read to and from the backup volume just fine via Finder. The only issue is that Time Machine can't. What's the problem? How do I fix it?

Attached is a screenshot of my Finder window next to the Time Machine Sys Prefs window.

View 4 Replies View Related

OS X :: Time Machine/unable To Copying Files To Backup Volume?

Nov 23, 2008

Any clues to this error... I've been getting it fairly frequently as of late. Probably every few days.

Unable to complete backup. An error occurred while copying files to the backup volume.

View 6 Replies View Related

OS X :: Unable To Backup Data Via Time Machine / Volume Cannot Be Mounted

Jan 1, 2009

I've spent a good deal of time over three days trying to do something that I think is both doable and shouldn't be all that hard. I have a 750gb external HD attached to a Mini, and I'd like to use that drive to do TM backups for the Mini, as well as three MacBooks.

But I can't seem to get access to the backup drive from the laptops to either get going in the first place, or to remain available for TM. I get "volume can't be mounted" errors, "image can't be mounted errors", etc. I find that I can't ever eject the backup drive from the Mini (always told an application is using it...even if I've just booted up the Mini). And with one of the MacBooks, even a direct FW connection to the drive doesn't result in the drive showing up in Finder.

Isn't this a pretty straightforward thing to do? Is there a step by step somewhere that might help me figure out what I'm doing wrong, or what I need to fix? Should I reformat the drive again and start over (there are no important backups on it yet)? By the way, the drive is formatted Mac OS Extended (Journaled).

View 1 Replies View Related

OS X :: Unable To Backup With Time Machine / External Volume Cannot Be Mounted

Mar 14, 2009

I'm having trouble backing up with Time Machine. Here's the setup:

1. Three, 1TB external hard drives in a concatenated software RAID. This means that they are treated as one large drive. There is no mirroring, no increased data rate, blah blah blah. It's just three hard drives in the place of one. I am aware that this means my backup is three times as likely to fail with the hardware, but that's OK.

2. These three are connected to a USB hub.

3. This hub is connected to a G5 tower. The G5 tower can back up to the concatenated drives (I'll call them just a RAID from here on), and also all additional external hard drives that I connect to the G5 tower have been backing up to the RAID no problem. This is great.

Here's the problem:

I'm trying to get two more computers to back up to the RAID wirelessly. I read a lot online about how this didn't used to be a supported feature (backing up to an external hard drive over a network with time machine), but that Apple has recently upgraded Time Machine to support this functionality.

The first computer I started with to try to backup over the network was a Macbook Pro, trying to get it to backup to this RAID. It can see the RAID over the network, mount it, copy files to it/read it, but CANNOT time machine backup to it. I select the network RAID as the backup device, hit "back up now," then get this message:

"The external volume cannot be mounted."

This is really bizzare, considering that it is mounted, and that I can copy to it. Just for your information, I have an airport extreme wireless network that has been working beautifully, no Keychain access issues, no 3rd party firewall, nothing. I've run through Applecare on this issue: the MacBook Pro has never done ANY time machine backup on the RAID, not even a partial one, so there's no dangling sparse bundle or backup folder or anything like that. All network permissions check out, etc. I've tried repairing the RAID with disk utility, as well as repairing permissions (although I have not done either of these things to the MacBookPro).

The latest thing I tried was plugging the RAID directly into the Macbook Pro. Here's where I got the first clue (at least I think so)...Plugged DIRECTLY into the MacBook Pro, the RAID will mount, but the MacBook Pro WILL NOT backup to the RAID. It gives me the same message: the selected volume cannot be mounted. Again, this is strange considering that, just like when I am viewing the RAID over the network, plugged directly into the MacBook Pro the RAID will mount, I can read it, copy files to it, etc.

I have considered plugging the RAID into the Airport extreme directly, but first of all this would mean much slower transfer speeds with the G5 tower, which is a big issue considering the files I am backing up every day, and two, since it seems that the RAID won't be recognized by the MacBook Pro even when plugged in directly, I'm thinking that this is a more fundamental issue.

View 7 Replies View Related

OS X V10.7 Lion :: Time Machine Backup Of RAID1 Data Volume(s)?

Jun 19, 2012

if i am running my new lion OS on drive #1 and i have a Raid1 array on drive #3 and #4 with all my DATA - can i back this up using Time Machine? i would like to place my OS's on a single drive and have my DATA in a raid array but if this means that i lose the ability to retain a Time Machine backup of my data i will simply upgrade to Lion and keep the data on this drive so it can continue to get backed up in time. 

View 7 Replies View Related

OS X :: Move Time Machine Backup To New Drive?

Oct 31, 2007

Is it possible to move your existing full Time Machine backup to a new drive, so you don't have to create a new full backup? Specifically, I'd like to move a sparsebundle network backup from one drive to another.

View 24 Replies View Related

OS X :: Time Machine Error "This Backup Is Too Large For The Backup Volume"

Jan 27, 2009

Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume." Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs. Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.

Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF? This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder. I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!! Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely?

View 2 Replies View Related

Applications :: Can Move Time Machine Backup To Smaller Drive

Mar 28, 2010

I'm trying to move my Time Machine backup from my Drobo to another disk, so I can reformat my Drobo, then copy back the TM back. The problem is that I don't have a disk that's bigger then the Drobo, so I need to copy it onto a smaller disk before copying it back to the Drobo.I've tried to do this the way that's described all over the web (using Disk Utility), but this always results in the error: Restore Failure, Not enough space on /dev/disk1s2 to restore. I believe this is because everyone is going to a *bigger* disk and I'm trying to go the other way.

View 4 Replies View Related

OS X V10.5 Leopard :: Time Machine - "The Backup Volume Could Not Be Found" Alert

May 17, 2012

I need to change my backup volume for Time Machine. But I don't see [Preferences] or [Change Disk] when I click on Time Machine from the System Preferences.

Info:
iMac, Mac OS X (10.6.8)

View 14 Replies View Related

OS X V10.5 Leopard :: Time Machine: "Backup Volume Could Not Be Found."

Feb 15, 2012

I saw that this issue has been addressed and there seems to be a few solutions for it but I had a hard time understanding some of the steps described in previous posts. I am running OS Leopard 10.5.8 and I am using a FreeAgent 500GB hard drive for Time Machine. Today I tried to back up and all of a sudden I'm getting the "Backup Volume Could Not be found" error. I tried deselecting it and reselecting it, and now its saying it doesn't have enough space to back it up. 

I really don't want to completely erase the hard drive if that isn't going to fix it. Before now it would just overwrite a few old backups and make enough room for a new one, while leaving 2 old ones on there. I want it to do that. 

View 1 Replies View Related

Applications :: Time Machine Taking Long Time To Backup - Changing Backup Time?

Dec 11, 2009

I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.

Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.

View 7 Replies View Related

OS X :: Can I Use Existing WD Mybook With Time Machine

Aug 29, 2009

Can I use my hard drive with Time Machine ? I got the drive in use already so my question is wether I can additionally use it as a backup disc without erasing its content? Do I just connect my drive and start Time Machine app and it will create Time Machine folder on its own ?

View 9 Replies View Related

Software :: Unable To Backup Via Time Machine / Backup Disk Image Could Not Be Created

May 1, 2008

I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.

So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.

It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1

Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.

However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.

More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.

Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):

Is this because time machine requires a network faster than 802.11g?

Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?

I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Backup Freezes On Initial Backup Attempt?

Mar 20, 2012

I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive.  I have a MacBook Pro that was purchased about 3-4 years ago.  The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8.  I also have another WD 1 TB FireWire external drive that I use to store all of my media files.   

After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup.  It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB.  It started the backup process at a rate of about 1 GB per minute.  In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.   

Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings.  I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC.  I then initiated the time machine backup again.  Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute.  Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier).  When I woke up this morning at 5:30 AM it was sitting at 69 GB. 

I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it.  I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup.  And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.

Info:
MacBook Pro, Mac OS X (10.6.8)

View 2 Replies View Related

OS X V10.7 Lion :: Identity Of The Backup Disk Has Changed On External HD Time Machine Backup

Apr 30, 2012

I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?

Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)

View 1 Replies View Related

MacBook Air :: Time Machine Backup Takes Up To 6 Hours To Do A Backup Of About 30GB?

Jan 9, 2010

Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;

My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!

I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)

But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.

View 3 Replies View Related

OS X V10.7 Lion :: Way To Make A Backup Of Time Machine Backup On A 2nd Hard Drive?

Mar 9, 2012

Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.

Info:
iMac, Mac OS X (10.7.3)

View 6 Replies View Related

OS X :: Using Time Machine Restoring On New HDD - Time Machine To Recognize The Backup

Nov 19, 2008

I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.

Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.

View 2 Replies View Related

OS X :: Time Machine Backup After HD Replacement / Redundent Backup Going Take Up Space

Jan 11, 2011

I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.

Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?

View 9 Replies View Related

OS X :: Time Machine Backup Failed / Unable To Create Backup

May 3, 2009

I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.

My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up

anyone have this problem? how can i fix it?

View 1 Replies View Related

OS X V10.7 Lion :: Time Machine Backup Is Too Large For The Backup Disk?

Feb 10, 2012

my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file. 

Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.

Info:
Mac OS X (10.7.3), time cap or Time Machine

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved