Just bought white wired Mighty Mouse (eBay) and connected after restart, PRAM reset, shutdown, and start. Looked at Sys Prefs to configure pea-ball and selected 360 scrolling. Only get vertical. No horizontal, and no 360. Looked at various forums and Q/A's and cleaned the pea-ball as suggested. No dice. Still only vertical scrolling. Looked for drivers to download for updates, but found none.
I was just watching some of the Mac Basics tutorials on the Apple website, and saw a movie about "Wireless Basics". In the middle they mention Bluetooth, and its compatible devices like the Mighty Mouse. But I can't see a scroll ball on the mouse shown... Is this maybe a new (future) Mighty Mouse with �touch� scrolling or something? I would really welcome a new Mighty Mouse, because the scroll ball of today's version is a real shame
As per the title, is it possible? it's just seems to be one line of code for the magic mouse although that may be because it's pre-built inand may be harder on the mighty mouse.
I searched for this but there doesn't seem to be anything on it. Maybe because it's a feature not wanted but I think it'll smooth out the mouse scrolling and it's something i'd like to try, if anyone knows how to do it or has it themselves
The line of code for leopard and for the Magic is "defaults write com.apple.driver.AppleBluetoothMultitouch.mouse MouseMomentumScroll -bool yes"
This may mean you have to take parts from the magic mouse driver if that's possible but to be honest i have no idea.
This is the second Mighty Mouse that I have had this happen on, I've tried the usual use a piece of paper and run it around the edge, tip it upside down and scroll the ball about and I've even tried using a can of compressed air but both of my Mighty Mouses still wont scroll down. Obviously I don't want to have to shell out again for another of these far inferior mouses so I was wanting to know if anyone know how I could fix it or get Apple to send me a new one?
I have been having some problems with my wireless mighty mouse. For some reason it has stopped scrolling up; it will scroll down but not up. Unfortunately, I have lost the disk that comes with it so I can't reinstall the software. Does any have any suggestions as USBoverdrive does not as yet support the mouse.
I went ahead and disassembled my wireless mighty mouse, unscrewed the scroll ball from the lid of the mouse and found a ton of lint and cr@p that has been living in here for quite some time. cleaned it all up, put it together, now all of the little rollers spin freely, great.
I go to put everything together, including the 2 ribbon cables, mouse snaps together, fire it up, mouse works fine, i can click, side buttons work, but the scroll does not work at all now. left to right use to be fine, it was just up and down. now nothing works.
any idea what could have gone wrong? did i forget something?
This issue may have been present in Mavericks as well, but I have no first hand experience with Mavericks. I was recently updated to Yosemite at work and this is when my Mighty Mouse (wired, with a scroll wheel button on top, NOT MAGIC MOUSE) started going nuts.
I have my work settings matched exactly to the settings on my Mighty Mouse at home running on Mountain Lion. Horizontal scrolling is not an issue at all, but vertical scrolling is so incredible sensitive. I very slight scroll will send me to the op or bottom of a page in almost all applications. It is extremely annoying in my Adobe apps. I work in Illustrator moots the day and this scrolling issue has killed my production time.
I use my vertical and horizontal scrolling quite a lot in doing my work. The vertical again is fine and seems to match my scrolling at home, but any more than a single click of the scroll wheel since updating to Yosemite will send my cursor off of the artboard, which is sometimes very large. I t has too often centime to the edges of the pasteboard which than takes forever to try to scroll back into position. I simply use the Fit Artboard in Window key command to center my work on screen and then gently scroll to where I need to be.
To set my scrolling speed to slow will correct the vertical scrolling but will make my horizontal scrolling so heavy that I have to resort to using the hand tool to move around in my Illustrator app, which I have employed full-on at this point because it is the only consistent solution I have found.
Many people have suggested that I get rid of the Mighty Mouse and use the Magic Mouse. I have many reasons for not doing this (my 3D work needs a middle button for one), but I have also been reading that these Magic Mouse users are having their own scrolling issues.
This is an issue most of you are probably familiar with. The 360 scroll ball on my mighty mouse has become so lodged with dirt (I'm assuming) making it impossible to scroll down. Scrolling left, right, and up works okay at best. When I scroll in the working directions, it makes a smooth tracking sound (tick-tick-tick-tick), when I scroll down, this sound is absent and is replaced by a "shhh" sound, which is the beginning of the word I'm thinking of when I hear it. I've tried the "dry cloth" (when has that ever 100% worked) with no avail, then I resorted to using a sewing needle to get around the ball (which caught a very small amount of dirt). The down-scroll still doesn't work (I mean, it doesn't work AT ALL, it's not functional) and I don't know what to do. I'm sure the mouse can handle more than just regular-consumer workload.
I know that the general consensus here is that the Mighty Mouse is a piece of shit. That notwithstanding, I'd appreciate posters refraining from engaging in further elaborations on that concept when replying to this topic (i.e., no comments like "Buy a new mouse," please).
At any rate, I purchased a wireless Mighty Mouse about a month ago and was very happy with it until the batteries apparently died. One day the pointer simply stopped responding and the green light on the bottom of the mouse was flashing. I replaced the batteries and the mouse resumed normal operation. Then, a few days later it happened again. I have yet to re-replace the batteries and have reverted to using my now eight-year-old Logitech dual-optical mouse (possibly the finest peripheral I have ever owned). Has anyone else encountered this issue?
Is this mouse having internal hardware or software issues or is it normal for it to devour batteries at this rate? System Preferences says that Bluetooth is maintaining the connection properly, so I am ruling that out as an issue. I would just say to hell with it, and use my Logitech mouse full-time, but my wife hates it and I payed seventy goddamn dollars for the Apple product.
One of my absolute biggest pet peeves with the Mighty Mouse (aside from the input lag), was that you had to LIFT your middle finger off the right side of the mouse for the left click to register. You simply cannot rest your right-clicking finger on the mouse and left click with your pointer finger.
I know mighty mouse might be the perfect mouse for iMac. But is it too big for MacBook pro 13" and downgrade portablity? Should I buy bluetooth mighty Mouse for my new MacBook pro 13" or go for those smaller, lighter and cheaper bluetooth mouse from logitech/Microsoft? Besides, does bluetooth mouse work while using iPhone tethering over bluetooth?
My new Magic Mouse appears as a wireless Mighty Mouse on my iMac 10.6.2. When I open the mouse Preferences Panel, I get the options for the Mighty Mouse, not the Magic Mouse. It worked fine on my hackintosh with 10.5.8 but not with 10.6.2, so it seems the culprit might be in 10.6.2? It seems that USB Overdrive is the culprit for some, but I don't have it.
Looking for an alternate wired mouse to the Mighty Mouse thats works flawlessly on a Mac Pro under Snow Leopard.Also an answer from somebody on this who does not get any kernel panics would be good. I ask this because I haveread of somebody who was using a MS mouse which should have worked on a Mac Pro but turned out that the softwareprovided with said MS mouse was calling bad Kernel Extensions and was therefore causing Panics.
I'll try to keep my post short somewhat: I've acquired what appeared to be my most useless piece of equipment: the bluetooth mighty mouse. I am not against wireless stuff per se, I love the keyboard. But the mouse has these annoying problems:
1. Batteries wear out way too fast. 2. Trackball clogs way too easily.
Now I can do without scrolling down, and might clean the thing one day from the insides, but what annoys me is the battery life. And having to buy batteries every other week. A simple workaround would be to buy a cheap wired mouse. But for the sake of thinking about a project, has anyone with some background in electronics tried, or tried to think of the possibility, of modding a mighty mouse and enable it to get some juice through USB?.......................
Magic Mouse not scrolling or swiping even with OSX 10.6.3 ? I have an intel iMac with OSX 10.6.3 installed and when I replaced my mighty mouse with a new magic mouse, I only got basic functionality. When I tried to install the Wireless Software Update, the system told me I had a newer version already installed. I since learned that the software update was for previous OSX versions and that my version had the necessary software update included. So why does my Magic Mouse not scroll or swipe and why does my preference window not show the added functionality that I bought this mouse for?
Having issues with Mighty mouse to the point that i will soon smash it into a wall.I enabled the right click option in the menu since i use it to play Worlf of Warcraft sometimes.I just noticed the the right clicking works on and off and it's really annoying.I will left click a few times then right click will not work untill i press it like 2 or 3 times.Is it just me or this mouse is really that terrible?I was getting so frustrated in wow cause i had to like click several time to let the right click button work.Sometimes it will work every time i click it and then boom for few clicks it acts like the left buttong.No wonder that right click is disabled by default.
I was playing wow for like 5 hours straight without a itch , smooth, lag free and no crushes. How is it possible that a company that makes such a good computers is incapable of making a decent mouse?Found this article on seems I'm not the only oen. I guess it's time for a new mouse?
I also had another problem and i disabled bluetooth options on the mac pro. Few times when i powered up the pc it will stop at the desktop and a dialogue box will appear saying that it's looking for bluetooth devices? And my mouse and keyboard will not work there was no red light under the mouse.Happened twice and had to hard reboot.Somethign interfeering with the bluetooth ? Only done twice so far but now with bluetooth disabel will not do it anymore.
My wife's cat walked over her Macbook keyboard. Thereafter, when she uses the trackpad to try to move the cursor, the display moves in response, and the cursor sometimes moves, stutters, delays. Usually, both move.
So my guess is the cat hit some odd combination of keys changing some preference.
We could not find anything in System Preferences/trackpad, or searching the forums here (not that i know which words to use).
I like how the new Magic Mouse has that smooth inertia-scrolling like the iPhone. Do you think this will be a feature in 10.6.2 or will you NEED the Magic Mouse to use that feature? I think it would be pretty lame that you have to buy new equipment to enable a software feature.
I have a unibody macbook pro 15" with leopard 10.5.8, installed the magic mouse software update. The mouse does scroll, however it doesnt have that smooth inertial scrolling when you flick like the mouse does with the iMac.
Noticed recently that when scrolling up or down with the Magic Mouse, that I get that animated circular icon. I have to wait, usually a few seconds, until the cursor returns, before I can continue scrolling.
Is there a way to reverse the scrolling on the Magic Mouse like it was before? I don't know that I like having it set the way that it is now since updating to Lion. I would prefer it the old way as it all feels backwards now.