Ever since I installed Snow Leopard, once start-up is complete, I am not able to use the keyboard or track pad button for about 3-4 minutes. They are frozen - the cursor/arrow move according to trackpad/mouse movements, but anything kind of button/key input is not registered.
View 1 RepliesI have been having a number of issues with my unibody MBP for a few months now. I find that after using it for a while, the trackpad and keyboard start to malfunction. So far I have cleaned the hardware as there appeared to be some dust and debris between the internal battery and trackpad, but unfortunately this has not fixed the problem. I have also discounted any software issues, having cleared the hard drive back to stock. Â
From further research I have seen that the batteries can swell (design defect?) and cause these issues. It seems to occur when the hardware gets warm during use, and having looked at the battery, it is slightly swollen and misshapen. Â
As it appears to be a manufacturing/design defect, is it possible for Apple to replace the battery? Unfortunately I'm not located close to an Apple Store.Â
Info:
MacBook Pro
My MB's trackpad button is spoilt, I think there's something wrong with the spring which makes it unclickable and sometimes remains pressed.
Is there anyway to disable only the trackpad button but not the whole trackpad? Tapping still works, but the MB mistakens it as dragging sometimes because the button is stuck as a pressed button.
And once i opened it i unpluged the cable by mistake so it closed. And when i try to opened it again it made a lot of time to open because a bar was loading.. Maybe it oped is safe mode.. From then until now i hadn't any problem except from this with the opening. I try these days to fix it.. I boot from dvd install and from disk utility to repair it but it doesn't let me because i can't pus the verify button(freezed). i try to erase the HD but it tells me that is busy.. What can i do to fix my hd?
View 1 Replies View RelatedOur 2011 iMac with SSD takes 2:15 (two minutes and fifteen seconds) to start up. Start up on a SSD should be faster. OS X version 10.7.4 and applications are on the SSD. Any suggestions for correcting this lack of speedy start up?
Info:
Mac OS X (10.7.4), 3.4 GHz Intel i7, 16 GB DDR3
computer won't start. tried unplugging and holding in start button. After about a half hour and unplugging a few times, finally got it going. Imac G5
Info:
iMac, MacOS X (10.5)
I've received my new mac book pro today. After several minutes the system is freeze. how can I know why?? (I've revised the logs file, but everything looks be fine)
When I've a freeze, I press the power button 5 seconds and then the system is poweroff, but after this I can't startup again. I've to wait 20 minutes.
My trackpad is not responding. I have to reboot and then it works for a few minutes then completely stops. Keyboard is fine. I need to use a mouse.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I want to start with the core 64-bit, so I followed the instructions listed here:
[URL]
I applied the second method (the code in terminal):
sudo-systemsetup setkernelbootarchitecture x86_64
I restart my MBP (i5, 8GB RAM ..), and here he is freez on apple logo (startup)
When I started my computer this evening, it froze immediately after starting up. (I have had three start up items for over a year: Dashboard, iTunes, and Chrome). Then after I unplugged it and removed the battery to restart it (nothing else would work), it was extremely slow to restart. I had to then Option-Command-Escape out of each progrma that starts up, and when I started Chrome again, it was very slow. After some time, it started to pick up speed again, like starting a car engine on a cold winter morning. Â
Info:
Mac Pro, Mac OS X (10.7.2)
So my friend was using his MacBook and went to do something else. He came back and the screen was black, he hit space and nothing, tried the trackpad and nothing. He restarted by holding the Power button, and it go to the log-in screen, but he can't type anything, or use the trackpad. He has tired restarting several times and no luck. He also tried an external Keyboard/Mouse and that didn't work.
He did plug in a Flash drive and the light turned on, so the USB ports are at least getting power, but nothing is working.
I have a Unibody MBP (Late '08 - first model) running Snow Leopard. After the installation of SL and the upgrade to 10.6.1 (which I did in the same days), I have problems with my trackpad.
Basically, every once in a while the system ignores hard clicks for some minutes: if I tap it, the click is registered. If I press it down the click is not registered.
I do not think it's hardware-related: nothing happened and the noise/pressure/feeling are the same as before.Is there anyone else with a similar problem?
This is an early 2008 MBP, so I have a button separate from the track pad. For the last several days it has been most of the time clicking twice when I press it. The first one doesnt do anything, the second one actually clicks (that is, if I dont push it all the way down it clicks the first time and doesnt do anything, if i push it harder, it clicks the second time).
What can I do about this?
So, first of all, here's some advice: Don't leave your macbook open, on the floor. You never know what cups you've left there.
In other news, I spilled coke (the soda) on my macbook keyboard/trackpad. I put it on the floor because I thought that it would keep it cooler, since I was installing something and the fans were going *******.
The keys seem fine, but now the trackpad button has a sticky feeling and sound to it, which is very annoying/disconcerting. Is this a genius bar job, or can I get in there and clean it myself?
It's mostly cosmetic, as the trackpad still works, but I wonder what will happen as the coke starts a new life under there congealing and whatever.
So I'm using my air today and when I press the trackpad button slightly, it makes a clicking noise... of course, not the click it makes when you fully press it. Hard to explain the sound, but before it really recognizes the function, it makes a sound like an external mouse click. sorry if this doesn't make sense... hard to explain.
View 10 Replies View RelatedWhat is the cause of this is it software or hardware? I'm puzzled as to how it's possible for it recover overnight so that it's reliable again the next morning.
View 2 Replies View RelatedI've had my macbook for nearly 2 good years and really up until about a couple months ago I noticed that my trackpad button started to get bits of dirt in it and it gave it a metallic clicking sound that kinda annoys me. how to clean out this dirt.
View 9 Replies View RelatedMy MBA's trackpad button is weird, i bought the computer brand new and from day one the button seems to be a little off. You can click it but sometimes you have to work really hard to keep it clicked. i.e. if i'm dragging a window sometimes it just stops holding the window. Also double clicking is difficult and clicking on different parts of the button is difficult. Do you think it's enough to take it in to the bar?
View 1 Replies View RelatedI have a late 2008 unibody MacBook. This happened before, and now is doing it again. When I click or even tap to click, my MacBook acts like I am holding the button down. If I click in sons text it just keeps highlighting as I move, if I click the bachround it wants to just keep making a box. The only wY u can get it to stop is to hold down power till it shuts off. Everything else works like normal, but the MacBook acts like I am holding the button down.
View 5 Replies View RelatedI've been considering either a MacBook Pro 13" or a MacBook Air. I'll probably wait until the next MB Pro refresh (looks to be toward the end of March), and either pick up a new one, or possibly a refurb (of the earlier models) or close-out. Not sure yet.
I'm a long-time Mac user, on Macs exclusively since 1987, so no stranger to the platform.
I was checking out the MacBook Air (Apple Store and Best Buy), and noticed something about the trackpad.
It has the "button" at the bottom. But - try as I might - I could not configure it to do a "right click" (that is to say, press "towards the right" on the button to display a contextual menu).
I was able to go to the "trackpad" preference, and was able to set up the "two-finger touch" to invoke the "right click". But there seems to be no way to use the right end of the trackpad button itself to do this.
Is this correct, or did I miss something?
By comparison, it is easy to set up the MacBook Pro to do a right-click, even with its "buttonless" trackpad.
But this feature seems missing from the MB Air.
Is it?
The trackpad button on my 2008 macbook is sticking and not working.
Info:MacBook, Mac OS X (10.7)
My Mac stats: Mac G5 DT/1.8 GHz / OS 10.5.4 / 2.0 GB SDRAM with all current system downloads; I bought this Mac new from Mac connection approximately three years ago. The problems I've been experiencing for many months:
1. Seldom, but occasionally my Mac will fail to start up causing me to do a forced shutdown by holding in the power button. If I delay doing this for a while (a minute or two), the Mac fan comes on rather loud. After a minute or so after the forced shutdown, I try start up again and Mac starts up OK.
2. Seldom, but occasionally my Mac 'freezes'/cursor will not move, causing me do perform the forced shutdown as described above.
3. When I wake Mac from Sleep mode, there is a 'pop/snap' sound which is very audible depending on the volume setting I am using.
NOTE: In case I had any defective SDRAM modules, I replaced them with new high quality ram modules.
I can not stop or cancel the download..
Info:
iMac, Mac OS X (10.6.8)
I've recently installed Lion on my macbook pro 13" mid 2010. Then it freezed end i never got it back up again. If I start up my mac, the screens just black. Sometimes it freezes when the spinning wheel is visible. If I try to boot with the recovery partition it freezes to. Plus my lion DVD is now stuck in my machine.
Info:
MacBook Pro
I don't know if anyone else has ever had this problem, but it's driving me nutts. The trackpad button has done this once before where it would be real loud when you click it. There's a lot of play in it and sometimes clicks twice but only the second click registers... it's hard to explain.
The first time this happened it went awhile after a days use. However, now it's doing it again and it's been a few days now and it's so anoying!
So what do you think about it?
I'm not too fond of it, I think its noisy and needs just a slight too much force to click. I only click it when I "right click"
Just bought my MBA about a month ago. Recently it started doing something weird, mostly on the dock icons.
Sometimes when I go to click on an icon, it doesn't do anything, regardless of whether I am clicking, double clicking, or pushing the button below the trackpad. I end up having to move the cursor off of the icon and back on once or twice before it will let me click.
Just had my air replaced by customer relations following three faults in the first 5 weeks of owning - the new one's great - had it for 4 days but i've just noticed that the bezel is getting scratched where the trackpad button sits (at either side) surely this isn't normal?It's not a biggy at the moment - the left side is noticeable - the right is if the light shines on it in the right way.Is this just "how they are"? My white macbook wrist rest broke for a similar reason, but after almost 2 years of daily service, 4 days and marking?I really feel that Apple must be thinking i'm a constant moaner! I really am not it just seems to be bad luck.
View 21 Replies View RelatedI haven't noticed this when using a USB mouse, but when I use my trackpad recently, and click on a non-active window, it focuses on the window I clicked on and then immediately "minimizes" it into the dock.
View 1 Replies View RelatedAfter years of faithful sevice, my MacBook Pro has recently taken to registering clicks as double or even triple clicks, and I have to try several times to get the single click I want. Actually, it's become so sensitive that it only takes a light touch (less than needed for the button to click) to think that it's being clicked. I assume this is a hardware issue. Do I need to take my computer apart to solve it?
Info:
MacBook
Pro, Mac OS X (10.6.8)
