I have a 500GB hard drive in my laptop, I partitioned it and I put 80GB for Windwos and then the rest of it for MAC, I don't know how but I somehow got rid of the Windows. I ejected the BOOTCAMP on the Desktop of the Mac OS X and then I tried to delete the partition but it didn't work. Now I tried to go to BootCamp Assistant but It doesn't show that I have partitioned hard drive. It shows me that I have only 420GB and it shows only my Macintosh HD. The 80GB are lost somewhere. Tell me how can I format the whole hard drive and get the 500GB again? And i want to do it while the hard drive is in the laptop and is working? Is there any way of doing that(it is fine if i have to install the OS again) Or what do i have to get done so that I can fix it?
I have a new iMac 27, which I'm running primarily as a Windows machine. Using Bootcamp, I sectioned off 150GB of the 256GB SSD for Windows and installed W7 on it (the rest I leave for OS X, in case Windows fails, or upgrades become available). I've installed programs on the Windows drive, transferred my emails, etc. Now I still have to do something with the 1T hard drive, which I've decided not to partition, and to use exclusively in Windows mode. Two questions:
1. Please talk me through the process of formatting the 1T drive, as if I were a child! 2. I will use this drive mostly for large data files, but perhaps also for less important programs. Installations seem to happen more or less automatically when you insert a disc - how would I direct a program in the normal course of an automatic installation towards this second larger hard drive, AND is there any way (simply) to have programs running on the SSD with associated data files sitting on the other drive (e.g. with iTunes)?
I installed a new hard drive into my wife's older iBook G4 since the HD that came with the machine was only 30GB and was max'ed out shortly after we added some applications and photos. (Never should have bought such a small hard drive in the 1st place!) The new hard drive is an 80GB hard drive I bought online. I turned on the machine and got the question mark (?) blinking with something else on the 1st screen that came up. I proceeded to insert the original iBook OSX install cds. First I cleared the hard drive under disk utility and then the computer recognized the new drive. Then installation began. Got through the first disk no problem. Then it restarted and asked for disk two, which I inserted.
Then, if it decided to start installing from disk 2 (it kept going back and forth before it actually started disk two installation), it would get about 75% through the disk two installation and I keep getting a message saying 'There were errors installing the software'. I have tried to eject and re-insert the cd and I get the same message. I started from scratch by re-booting, wiping the hard drive clean again and started with disk one, only to get to disk two and encounter the same problem. I don't want to take this computer in and pay a service company to get me straight. This is an experiment to see if I could upgrade the hard drive and memory to make a slower/older machine perform better. We really only use it for organizing photos, surfing the net, office applications, etc.
I have a Ibook g4 that got trashed the scree stoped working it would flicker on and off so i tryed to fix it and made it worse because I have not skill so I then pulled the HD and put it in a pc laptop I have I am now trying to get files off it through linux i tryed ubuntu because that is the only thing i have used but it is way to slow on my laptop because the cd drive is older then time so I tryed dsl and puppy linux but don't know how to mount the drive it shows up in the bios but not when i try to use the simple mount tool in puppy or dsl I know this is a mac fourm but I am hoping someone has done this before
I'm selling my old white Macbook so I can purchase the new Unibody one. I wasn't sure how exactly to "wipe" my old hard drive on Mac. Do I have to install the OS all over again? Did my Macbook come with the disc so I could do this? If not, is there a way to wipe everything without formatting the hard drive?
if i can partition my Windows NFTS External Hard Drive. I do not want to format it because i have some important files and programs on my External Hard drive, But I also want to use it for Time Machine Backup. I was wondering if it was possible to Not format my Hard drive, Partition it, And then format the 2nd partition to Mac, and use it for time machine. I am using Mac OS X Leopard 10.5.8
The Capacity of the EHD is 55.9GB Available: 37.1GB Used: 18.8GB
I recently upgraded to snow leopard because i needed to install logic pro and I decided to format the hard drive, I did my back up but there was to much music on it so I did a couple of dvd's just for the music I compressed them (.zip) with stuffit one of them did work but the other one where it has all of Itunes library doesn't unzip. I wonder if I can recover it from time machine?
i just formatted a hard drive using apple's software but i changed my mind.. now, i tried putting it inside an enclosure and connected it to my windows laptop, but it's not detected,. the enclosure is detected, but the hard drive isn't.. i would like to use this for both my mac and windows.. can any1 tell me how i format my hard drive so that it can be recognized by both mac and windows?
i have a external enclosure, and the hard drive is 300gb.
I am looking for a way to wipe my hard drive clean so I can sell my G4 powerbook. However, I have read some forums with instructions that involve my start-up disk to reinstall os after it wipes... but i don't have my start up disk.
I'm selling my Macbook Pro and the buyer said when formatting my harddrive, I don't need to reinstall the OS (10.6.8) because he is going to install 10.7 on it. This is good news for me because I don't have the OS installation disk anymore. I read somewhere that it could be possible to format my hard drive using another Mac (my roommate has a Macbook so that works) but I can't seem to find exact instructions.
I asked about running Snow Leopard on my mac after a hard drive fail. I'm having issues with formatting a new hard drive in my mac. I have a 2007 black macbook and I'm trying to run a 160gb SATA seagate hard drive. After replacing this hard drive, I booted my mac up from cd, ran through setup fine until I got to the 'select a drive to install to' - the point where my hard drive should be visible. Nothing there at all. Nothing to click on in the box. My question is, is there a process I need to undertake to format the hard drive or is this an indicator of a much bigger problem?
My hard drive died last week on my MacBook and I failed to back up anything forever the last couple of months. Anyway, I took it to the genius bar and they confirmed its death, and showed me how to replace it. I decided to go ahead and do so on my own, and also upgraded the memory while I was in there. I also decided to upgrade to lion since my DVD drive was giving me trouble and it'd be easier to use the USB - and yes the computer meets the requirements for Lion.The problem is that when I try to boot up to format the HD, I only get a black screen. No disk utility when holding option, nothing. What am I doing wrong?
I have an old G5 I'm giving away and I don't have the install disc for it. I was wondering if there was a way of formatting the hard drive and not reinstalling OS X straight away, but if someone inserts the disc when booting it up they can reinstall it.
I think I'm going to format my hard drive to delete everything from it and start fresh with leopard. I already have leopard installed, but I think I should just format my hard drive (after backing up what I truly need like my music and other files) and then just install leopard.
Question, I have read that I go to disk utility to do this (format and install leopard), is this correct? If so, what else do I need to know before I do this?
I just bout this Western Digital External Hard drive, Passport SE. Anyways, I formatted it to MS-DOS (FAT) so I can use on mac and/or windows. One of the other main reasons I bought it was so I could use it to watch videos on my Xbox 360.
Now I've seen tutorials online with windows how to re-format it to FAT32 so it works properly on xbox 360 but cannot figure it out on mac? On some of the tutorials they use certain programs to do it, is there something like that for mac I can download? Is fat32 and fat the same? I know there has to be a way for me to be able to format it to FAT32 using mac.
I am having problems with my I-Mac. It is the 2.8GHZ 24" model and when I try to start it up I get a white screen with a blinking grey file folder with a "?" mark in it??
I had this problem before. Erased the hard drive and then reinstalled everything. I made it through it but I think I may have done it wrong. Anyways the computer worked good till the other day. I upgraded to Snow Leopard and now it is doing it again.
Do I need to start with the install disk 1 that came with the computer and install disk 2, then install snow leopard? Or can is there a faster route of doing this?
I have an intel iMac (non-aluminum) without an operating system. But there are lots of important files on the iMac's hard drive. Can I install OS X Tiger on it without erasing any files, and still have them be accessible on the computer? If so, how?
I have an external hard drive which I first used with my pc. It is formatted for NTFS. Now with my new MBP, I want to back up data, and I am having no luck. The external hard drive is a Verbatim brand, 500GB. On their website FAT32 download dosnt work! I have tried disk utility with no luck. What am I missing?
Info: MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
I bought a WD My Book Essential to do Time Machine backups. It is formatted for a PC but I was told I need to format for my IMac before I can use it. How do I do that? Is it a complicated process? I have only been using a Mac for about a year now and am still learning about them.
I have an external hard drive that I use to watch movies on a Nintendo Wii and some of the movie files are over 7GB, which means when I format the drive to FAT32 I cannot copy the larger files. What are my options for getting around this problem? I have VMware fusion but I cannot easily see my external drive in XP. Is it possible to format the drive in XP and then transfer everything via VMware on XP?
got a real basic question to ask and you're gonna think im an idiot for asking...I just bought a 320gb western digital elements hard drive and want to reformat it so that its compatible for both mac and pc's. i intend to format it as NTFS-3G as it would allow me to use it on the 2 platforms without having the 4GB file size restriction that fat32 has, anyway.....
when I go to reformat my external hard drive in disk utility, I see my external hard drive to the left, and there's a "sub" hard drive as a child of the external hd listed uppermost. just wandering which one of the two do i select before going to Erase>Windows NT filesystem (NTFS-3G)>erase? Do I select the uppermost drive and erase that or the lower one? or both
I just got my new Seagate 640gb external hard drive and am in the process of formatting it on my MBP. However, I am not sure which format to do? My main use for the hard drive is for transferring media files back and forth between my MBP and PC using just one partition on the drive. I already know I'm not supposed to pick 'Mac OS Extended (Journaled)' because I believe that is to use it as a boot drive. So should I pick 'Mac OS Extended' or maybe 'Free Space'?
I have an external hard drive that I was previously using on PC, having attempted to use it on a Mac, it will not write to it. I've found that I have to format to FAT32, which I think i can just about manage (yes, im a girl) but my concern is, if i format through the MAC, will i then lose what's on the hard disk as the tab says 'erase'? I have a lot of images on the hard disk so am a little petrified! Any advice for this really basic question would be appreciated!