every tim i try to backup it starst to backing up and it stops and it says (the backup was not performed because an erroe occurred while copying files to the backup disk.)( the problem may be temporary. try again later to back up . if the problem persist, use disk Utility to repair your backup disk.)i did everything it told me to do but it steal not working . what shod i do ?
Info:
MacBook Pro (15-inch Early 2011)
Just downloaded the new software update (10.5.7) & now my time machine backup doesn't appear to work. I get the following image. I have been to the preferences but can't see the external hard drive there?
View 3 Replies View RelatedI've installed SL on my Mac Pro from scratch (Clean Install). Then I created my first backup with Time Machine. (550GB) After two weeks, I found out that I could boot my machine into the 64 bits kernel. So I did. I booted with the 6 + 4 keys during startup and I've checked and I was using the 64bits kernel. Then I week later without adding no new data, I caught a time machine backup with over 350GB backup. (Which match the data on my third hard drive.)
I was wondering if by changing the kernel did Time Machine "thinks" that it is a new backup a take some files from my drives protected by the backup.
starting with my iMac permanently sending crash reports, unbidden and unstoppable. I started with 10.4, and I'm now on 10.6 in after repeated attempt to get a useable mac. All was well, until I included another external disk to the time machine backups. It took nearly two days, then seemingly with around 5Gb to go, it suddenly stopped and said it had finished. I logged out and went to work, coming back to find it was still locked in a plain blue screen. I left it overnight, still like it this morning, so I did a forced shutdown. It wouldn't restart. I rebooted from the 10.6 disk, but it said the hard disc was irrecoverable and I needed to erase. I erased and reinstalled, but when it came to restoring from Time Machine, it didn't recognise the backups. Checking on the backup disk it has a folder indicated it is still in a backup. If I try to enter a different backup through the Time Machine icon in the backup, it too says I can't because it's in the middle of a backup.
Is there any way I can delete this folder and get it to let me back in? I don't want to just delete it without some guidance as it's taken me weeks of reinstall just to get this far, having persuaded the likes of TurboCad to let me re-install from a download. I feel I'm on the threshold of having to start all over again. I attached a sticky (I have no apps to speak of at the moment) which had an image of the error message, showing two icons within minutes of each other, one showing a completed backup, the other a message icon stating backup in progress. I don't think the image on the sticky can be accessed...
My time machine backup isnt working for the last few months. The backup is located on a QNAP TS-670.
I can look for the TM and the iMac see the TM, but if I start the backup, a popup comes up. "The image of the backup-volume "/Volume/TMBackup/Danielas iMac.sparsebundle" cant be accessed. (Error -1)
Maybe it is not the exact error message in english, but I hope you know what I mean. Im working on a german system.
I can access the TM-Share through the finder (share: afp://[...]).
Here is the log I've got from the terminal: Danielas-iMac:~ danielawendling$ tail -f /var/log/system.log |grep backupJun 6 14:43:36 Danielas-iMac.local com.apple.backupd[323]: Failed to eject volume /Volumes/TMBackup (FSVolumeRefNum: -105; status: -47; dissenting pid: 0)
[Code] .....
Info:
iMac, OS X Mountain Lion (10.8.5)
After I upgraded to Yosemite, my MAC Time Machine backup drive is no longer recognized and the process freezes when I try to re-install the drive from the drive's software.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
I plug my harddrive in and let it do the time machine thing. Does this mean all my movies will backup onto the HD? When I try to search in the hardrive I cant seem to find the movies and tv shows that I want backed up and I need to get them out of my laptop.
View 4 Replies View RelatedCan I put a time machine backup from a MacBook pro onto a Mac air and vice versa (assuming enough space of course)?
View 1 Replies View RelatedJust a quick question, if I add a second drive in an Optibay, will TM back up both of my drives?
View 4 Replies View RelatedI have a backup drive in my mac pro is it possible to backup my macbook to the mac pro backup drive. Wirelessly or otherwise
View 6 Replies View RelatedAlbiet to the claim that the Time machine performance in SL is almost 50% faster than Leopard seems to be not true. The initial backup after the upgrade took almost 45 minutes and incrementals around 15 -20 mins as before.
Anybody else seeing the Time machine backup performance improvement in SL ?
If I were to make a time machine back up of my MacBook pro and then sold it wouid I be able to restore that time machine back up on a new iMac ( both are using snow leopard , uni MacBook pro and new 27 iMac)?
View 4 Replies View Relatedi bought that 15" i7 mbp yesterday. after importing a time machine backup from my mid 2009 15" on it, it didn�t switch the gpu back to the intel one again, so its only 330 gt. that means you have to make a clean install for the gpu switching to actually work. everything runs fine after that new install. just wanted you guys to know if somebody had the same problem. another thing is that as long as skype is open the mbp always uses the nvidia gpu. that takes a lot of battery away, especially is you have skype running in the background the whole day is i do.
View 2 Replies View RelatedI need to upgrade to a larger hard drive size, if I make a time machine backup of my current drive can I then re install selected items onto the new drive once it's installed without losing any data or programs?
View 5 Replies View RelatedMy new hard disk has used up some of it's capacity on unsuccesful back up attempts.
Info:
MacBook Pro
My orginial MacBook got stolen a few weeks ago and luckily my insurance bought me a new one. However, I have just managed to get hold of my external hard drive, which had my backuped time machine files on it.
So I went to my files from my time machine and this is what I did.
I went to the Time machine icon on the top of my screen and clicked on "Browse other Backup disks". I then clicked on my external hard drive and it opened Time Machine and then I found my latest update. I then clicked restored and the files got copied from my time machine to my new Mac.
The problem that I have discovered is that I restored my files incorrectly and that all I have just done is copied the files over and not restored my MacBook.
Now that I know how to restore my backuped files correctly, when I try and do it, I do not have enough space on my computer, because I still have the copied files on my Mac. I have tired to find the files without any luck on my computer. All I can think of is deleting my hard drive and start again, but I do not have the OS disks as Apple no longer supplies them when you buy a new Mac or it just didn't come with my new MacBook Pro.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a Mac Book Air with Yosemite installed. I also have Time Machine backing up to a Time Capsule. Plus, two other Macs are backing up to the Time Capsule. The problem I am having is that the Mac Book Air backups are not working. It keeps say "Preparing Backup" then after a while it says "Stopped". I have tried deleting the "In Progress File" but this has not worked. The other backups on the other machines seem to be working fine.
View 3 Replies View Related