MacBook Pro :: Performance On 2010 If Upgrading RAM To 8GB?
Apr 13, 2010
It looks like it is less expensive to upgrade the memory to 8GB from Apple now. I need to decided whether to go for 4GB or upgrade to 8GB BTO. With the 8GB RAM, will there be noticeable gain in performance? I guess VMWare Fusion may run better. Not sure about other applications including the OS
Can I up grade my MacBook Pro 10.6.8 , upped to 8 giggabits can speed this thing by upgrading my processor?Up I get scratch disc full messages on Photoshop & I have plenty of free space, whats the deal.I would like to improve performance.
Here is the info Model Name: MacBook Pro Model Identifier: MacBookPro7,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 8 GB Bus Speed: 1.07 GHz Boot ROM Version: MBP71.0039.B0B SMC Version (system): 1.62f6 Serial Number (system): WQ*******TM Hardware UUID: 2E0FDA8F-E79A-5E81-8E19-82DE2C159D1C Sudden Motion Sensor: State: Enabled
I have been struggling with my Mac for weeks and weeks and before I finally decide to reinstall everything I wanted to turn to you experts for maybe the one hint that can resolve my problem: I have a 13 inch MBPro, mid 2010, basic version. Later I installed the WD Scorpio Blue 1 TB hard drive and copied the time machine backup. Shortly after, I recognized massive lags. I have quiet a few photos (3000 or so), 20gb of music and 40gb of films on this drive but only a few programs. Adium, Steam, Starcraft, MS Office, Skype, Growl and that is it I think. I use mobileme for synching, if that helps in any way.
Some examples: Sometimes youtube videos lag for a few seconds, even with HTML5, it takes 5 seconds to open a new tab in sapharie (again, only sometimes without any obvious rule)..................
if it is possible to upgrade the USB 2.0s on the MacBook Pro (2010) to USB 3.0s? I know the new Macbooks are dropping soon with 3.0s on em, and Instead of swapping out computers entirely, I am interested in upgrading my internals as far as I can, just to keep up with the curve and to increase my Macs performance. (2) will the new hardware work with Lion? Im not sure if there would be any type of hardware-recognition issues associated with the upgrade. (3) If not, would it likely work with Mountian Lion?
And Lastly (4), How is it done? Im sure its pretty straitforward after popping off the base plate and getting a look inside the Notebook, but Im actually going to purchace new RAM to increase the speed at which my Mac runs, and new USBs, and possibly even a boosted HDD to throw inside and Instead of taking the back off so many times, I kindof wanna do it all at once.I cant be the only one who wants to boost the USBs.
Info: MacBook Pro, Mac OS X (10.7.4), Mid-2010 Model
Just bought this recently and installed Windows 7. The following screen shot under WEI Macbook Air 2010 13'' 1.86GHz 4GB RAM 256GB. The performance is quite amazing consider its 1.86GHz CPU, I bet 2.13GHz CPU would score bit higher.
Performance of the new MBP's as they take on the slew of new games being presented (VALVe has said they will release new games each Wednesday, so keep looking for your Css' and L4D's)
[URL]
Counter Strike Source will not be here all that soon so don't get your hopes up, they are redeveloping it, to run on a new engine. No point in porting the old engine when they will just have to do it again. Link:.....
I have looked over the postings closely but may have missed something. What is the current knowledge, now, in early September about Apple-installed SSDs and performance degradation over time? Early concern beginning with the release of MBP 2010 in April was the the lack of TRIM support in OSX. Has anyone at this point noticed or measured significant degradation of factory-installed SSDs? I am ready to purchase a MBP 2010 and I am considering a 256 GB SSD.
I just upgraded my hdd to a 500gb WD scorpio blue in my 2010 MBP 13". It seems to start and stop a lot more than the apple one (if that makes sense). and every now and then the computer seems to lag for 1-2 seconds when doing things like typing, scrolling, etc. I've tried searching and found other people have had similar problems with older MBPs and they talked about some EFI firmware or something. Does this apply to my MBP too? Or does anyone have any other suggestions of what I can do?
I needed to upgrade this unit in order to increase performance with VMWARE Fusion as I needed to use a few Windows 7 features and Applications... and although Mac OS is OK... I have to recognize that some features of Windows 7 are better and I need some only windows applications.
So I researched online the option of upgrading memory and HD. I read mixed opinions and experiences with non Apple Memory. But took the chance and during a recent trip to the US I purchased the Kingston upgrade kit... installed it... and so far no problems. I got a very noticeable increase in startup and working performance with Windows 7 and Fusion. Unfortunately I lost my notes regarding performance readings... sorry.
I was very intrigued with the Hybrid Seagate 500GB Momentus XT. Also read a lot of mixed experiences. I also picked up a unit during my trip to the US but waited to install it when I got back to Spain. I just installed it and made some simple timings to check the performance......................
How does StarCraft 2 perform on the current lineup of the iMac? I'm most interested in the 21.5" model, as I cannot afford the 27" version. Specifically, I'd like to know what resolution and settings the 4670 and 5670 models can handle...
just got me a brand new 2010 MacPro 2 x 2.4 Quad-Core with 12GB Ram and the ATI 5870. This is the first MacPro to system boot into the 64bit Kernel by default (ie, hold 3+2 on restart to boot into 32bit Kernel). One of the first things I did was run the Photoshop performance test, which FYI on my old G5 2.7 with 4GB Ram returned a time of 114 secs, and on the new Quad-Core in 64bit kernel returned a time of 14 secs, so as you can imagine I was pretty happy with the results.
Then the problems started...... when I was installing software I got the dreaded Kernel Panic, restart your machine screen. So I did, and it happened again on restart, so I did, and it happened again on restart, so I did.... you get the idea. So I put the system disk in and restarted, then reloaded OSX10.6.4 and everything seemed to be going fine, until I installed software again (different app from the first time), and I got the Kernel panic screen, then again on restart etc, so I booted into 32bit kernel and all is good. EXCEPT! - When running the Photoshop test in 32bit Kernel it returned a time of 17secs. Now, I know I am being picky here, but I do a lot of work in PSCS5, and by a lot I mean sometimes all day on large photographic images, so 3 secs is a big deal....
I've just installed an SSD in my new iMac 27", see here. I'm fast learning though (diglloydTools and other commentators) that once the application has loaded the SSD isn't involved very much from there on, so there are the same old performance problems. I'm finding in Firefox/Firebug where there is a large DOM (nothing exceptional) performance is still woeful.
So, baring in mind the Core i7 processor is under $200 and it would appear to have been possible to upgrade the iMac's processors in the past, does anybody have any advice for me? What parts will I need, have you done it and what was your experience, any common problems with doing this, are the parts themselves upgradeable (the quoted link only suggests they are) etc.
I have a 15" 2010 MBP. I got it well spec'd, with 7200 drive, 8 GB ram, best CPU... First thing I did was bootcamp. Went smoothly - did a 400 gb partition for Windows 7. The drivers all installed fine and Windows 7 does alright.
My Windows Experience scores: Processor: 6.9 RAM: 6.9 Graphic: 6.4 Gaming graphics: 6.4 Hard drive: 5.9
Things look good... But I am having trouble playing hidef content - VLC is choppy on a bunch of files that play smooth as silk when booted into Mac OS - and actually even play ok on my old Santa Rosa 15" MBP. Quicktime is also slow. I have always found VLC to be very solid. (actually use it on the Mac side for this test as well). I tried playing with the hardware acceleration toggle, and it does seem better with it disabled - anyone else having issues playing hidef media on the windows side of this MBP?
First I wanted to upgrade my new mac mini with a Momentus XT but now I'm thinking about getting a "real" ssd + a FW800 drive for storage to have the huge speed boost of the ssd drive. Does anybody have this combination in his mini? What I want to know: How is the performance like of the external drive connected to FW800? Is it comparable to a standard internal hard drive?
I have an iPad 32GB WiFi and a MacBook Pro as well so I was trying very hard to justify myself in getting an 11" MBA but ending up talking myself out of it. The 13" MBP is perfect for my uses. It's already lightweight and portable as it is. After playing with the 11" in the Apple store, I was impressed on how light it was. This no doubt blows away any netbook or any notebook in it's weight class in terms of size and performance. However, the MBP's battery life, hard drive space, and processing power OUTWEIGHS the reasons of dumping my 13" MBP for the Air. Also, I have it hooked up to a 21.5 Inch HP monitor at home and it's good enough to use as a main computer at home, and light enough to take on the road.
If I needed to lookup something quickly in bed or around the house, that's where the iPad comes in. If I needed to send a quick e-mail, my HTC Evo is already great at doing that. If I didn't have a 13" MBP or even the iPad, I would have most likely went ahead and purchased the MBA. Just now at this point, spending another $1000+ or getting rid of my MBP doesn't make much sense... yet.
I've been lurking MacRumors ever since 'the wait for Arrandale' began and finally decided to sign up now so I could post this thread. I've been a Windows user for a long time now and I have a Win7 rig at home. However, I'll be going to uni later this year so I need a good portable notebook that's suitable for the common mailing 'n surfing, but also for doing some programming in Eclipse (Java) and PHP work etc. I still have my Win7 box at home for gaming and things that require larger screensize, but for the notebook... I feel really attracted to OSX with a MBP.
It will be my first Mac, but my desktop dualboots with OSX and I love it. So that's why I have decided that my school notebook will be a Mac. This is why I have been closely watching the rumors for the new MBPs and ofcourse I was pretty disappointed when I saw that the 13" model still had a C2D cpu... It's not that I need a beefed up CPU in my notebook (... I have a 3.6 GHz quad at home ), but it feels 'wrong' to buy a MBP 13": even the 2009 MacBook has a C2D, so what will the MB 2010 update bring? Is it really worth the extra money? Anyone with a similar situation?
i am going to upgrade the ram and hard drive in my mbp, and i just have a couple questions. I'm sure there are some other topics about this, but i could not find any.
First i have Microsoft Office 2011 installed, and if i just take out the HDD and install the new one and put MAC OSX on it how would i be able to transfer over my Microsoft Office so i don't lose it and have to buy it again.
Also, should i put in the new ram, let it load up and read the new ram, then install the hard drive, or do it the other way, or just do both at the same time?
Early 2008 MacBook Pro 2.5 Ghz C2D 10.6.4 and Windows XP (Bootcamp/Parallels) 4GB RAM
I've read that I can bump my RAM up to 6GB (despite Apple's said 4GB limit) and with a current sale, I can get a 4GB module pretty cheap so I'm thinking "why not?". I'm planning on installing Windows 7 as well as playing more games on my laptop (my PS3 broke down on me). Would I realize any noticeable performance difference with the extra RAM in Windows 7 and/or OSX?
I am upgrading my RAM to 4 gb. I have a mid-2007 Macbook that came with 2 1gb memory modules factory installed. My question is, will it expand to 3 or 4 gb? According to Wiki, the late-2007 Macbook came with 2 1gb installed, expandable to 4, but does not list a mid-2007 that was installed with 2 1g modules, just 1gb (512mb). Becasue of this, I am unsure what it will actually expand to.
Well? Is there anyone using the 11.6" as the primary computer? If there is, post your thoughts here. Is the screen too small? How is the performance for your day to day tasks?
Has anyone tried running multiple virtual machines on these guys yet? I'm looking to run base installs of different OS's for my InfoSec classes. I'm really just testing different security configurations nothing fancy.
I'm looking at the 11.6/1.4/4gb of ram. Most of the time I'm only running 2 Virtual machines, just want to know if it can handle them.
I've seen some people have got win7 to run which is cool but the second os running is critical in this scenario.
I wan' t to replace my 160 GB MacBook Pro drive with a 1 TB drive for storage and better performance (7200 rpm disk) can anyone suggest me a model with good performance and also a low noise level?
Im thinking about buying a 13" mba to be my computer everywhere i go, but I have some doubts about it's performance because there are a lot of different opinions around the web.
It will not be my primary machine, since I have a sony vaio F (heaavyy for carryng around!) and a powerful desktop for gaming and rendering, but i will ocasionally need to do some work on adobe cs5, autocad, and google sketchup light work on the mba. Have you guys ever tried one of this programs? how is the performance?
Will either 6 gb or 8 gb of ram boast much difference in a macbook pro over 4gb? Which is worth the money? I do lots of hd video editing and tons of image processing.
Hey so I just got a MacBook in September and I want to keep it fast, clean, and working smooth for the years to come.I want to do all the things possible regularly (maybe once every 2 or 3 weeks, maybe more often) that will help optimize the performance, speed, and everything else on my MBP and keep it clean and working smooth... If I download Onyx, I don't know what "processes" to do and something might happen or get deleted if I check off something for Onyx to do. So could you tell me specifically what to do to just make my MBP faster, cleaner and all that like I said before.