MacBook Pro :: Outer Rubber Insulation For The Power Supply Cord?

Oct 30, 2009

I recently got a new macbook pro (thanks to Apple's great customer care/Customer Replacement Unit policy), and two days later, it got stuck under a moving chair, which peeled off the outer rubber insulation for the power supply cord. And a beautiful thing happened I used to notice that the magsafe power adapter would slip out when i was moving my macbook around from place to place a little bit too easily. Then I put 1 1/2 inches of electric tape about a centimeter away from the actual magsafe-macbook port, and the addition added just a little bit of resilience because of some sort of physics i can't explain. so if you want your magsafe to be a little bit stronger, but still pull out if you move it too hard, just add an inch of electrical tape to the end. works like a charm!

View 24 Replies


ADVERTISEMENT

PowerPC :: Mounting The Power-supply From The 2004 On The 2005 Is The Power-supply Compatible Or Not

Dec 29, 2010

I have a PowerMac G5 with the first motherboard that is out of order, and another PowerMac

G5 Late 2005

with 2x2.0GHZ

Mounting the powersupply from the 2004 on the 2005 is the powersuply compatible or not?

EDIT: I looked on Mactracker and compared the two:
Max Watts in the first is 604W and 450W on the late 2005.
I want to put a powersuply from a G5 2004 (604W ) on a G5 2005 that had a 450W powersuply is this possible ?

View 3 Replies View Related

Hardware :: Test A G5 Power Supply Like An ATX Power Supply?

Feb 12, 2008

My 2*1.8Mhz G5 tower (second version) shutdown two day ago and refuses to turn up again. I have absolutely no sign of life, not even the external white led or the internal red one. I'm trying to figure out whether it is the power supply of the start button which cause the problem.

Is it possible to test a G5 power supply like an ATX power supply, by connecting two pins which would make the fans start ?

View 5 Replies View Related

MacBook :: Lose Power To It Within Three Minutes After Power Cord Comes Off?

Apr 9, 2012

Last Thursday I down loaded software updates from apple and have been losing power very quickly ever since. It just seems like as soon as I remove the power cord I lose power with in three minutes.

Info:
MacBook, iOS 5.0.1, purchased feb 2009

View 4 Replies View Related

MacBook Air :: Identifying The Right Power Adapter And Power Cord?

Jul 6, 2012

Can I use existing 85w magsafe adapter from existing macbook pro with new MBA 13 magsafe2 port ?

Info:
MacBook Air

View 1 Replies View Related

MacBook Pro :: Power Cable For MagSafe Power Supply?

Jun 26, 2009

Anyone know where I can buy an extra AC cable for the MagSafe 85W power supply that came with my late 08 MBP? I'd like an extra cable and I'm not interested in ponying up the dough for the entire power supply. I checked the Apple Store and Macmall, but haven't found anything as of yet.

View 3 Replies View Related

MacBook :: Can I Use This Power Cord

Jan 19, 2010

I just received an iBook I bought used on eBay (got a great deal, and so far it looks good!). Only problem is- the adapter that came with it is like only 3-4 feet long (the adapter piece JUST reaches the ground from my desk). I plugged in the 'extension' cord from my Macbook Pro's adapter and that seems to be working fine, but now I can only charge my MBP with the little plug thing.

So my question is this: can I use any power 'extension' cable that fits (i.e. a random black one I just found) to plug the adapter into the wall? Like this: (URL) It would be great if I could, since this would save me the trouble of switching cords or buying another cord to connect the adapter.

View 9 Replies View Related

MacBook :: Power Up Without Cable Cord

Jun 19, 2010

I am searching for any bright ideas to power up my Macbook. I find myself in Belize without my cable cord for my Macbook but I happen to have a powered up PC. Any ideas on how I might use maybe my PC to power up my Macbook?

View 5 Replies View Related

MacBook Air :: Power Cord Will Not Charge

Feb 2, 2012

Having a problem with my power cord. 41% battery and i go to plug it in and the power cord does nothing. Changed outlets, cleaned ports on both ends, waited few minutes, and cursed at it and it still won't work.

Info:
MacBook Air, Mac OS X (10.7)

View 2 Replies View Related

Power Mac G5 :: G5 Power Supply Beeping/Churping Corrected With Leopard

Nov 8, 2007

I made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.

A clean install of Leopard eliminates the infamous power supply beeping

Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.

View 2 Replies View Related

MacBook Pro :: Battery Calibration - Power Cord

Oct 12, 2010

Well I just scored a 15 inch 2.4 from Bestbuy for 10% off. SOmebody just returned it having never even used it, but they had to discount it because it was opened. I love it love this thing!We did migration from our imac and everything came over. AmazingOne question about calibration. I charged it fully and let the power cord be in it for an extra 2 or so hours. I then used it unplugged until it basically shut off due to no power. Cant I just plug it in and let it charge all the way without letting it sit for 5 hours. Its not sleeping I dont think. It actually shut off suddenly as it was at zero percent. There is no power to it at all that I can tell. Will charging it now without leaving it unplugged for 5 hours ruin the calibration??

View 2 Replies View Related

MacBook :: Wants To Open Frayed Power Cord.

Sep 28, 2009

I got the frayed power cord issue where it opened up. Went to the Apple store they told me I needed my serial number. Went home came back and now they are having me wait over an hour for them to look at it.

I thought this issue was a common defect like the cracked whitebook and they instantly replace it

View 8 Replies View Related

MacBook :: Can't Find Purpose Of AC Power Cord

Jul 18, 2010

I had just received my first macbook a short time ago and I was wondering what the exact purpose of the AC power cord was.

Is it simply an extension cord to the charger? Or does it have a different purpose?

View 3 Replies View Related

MacBook Pro :: Yellow Light On Power Cord

Apr 1, 2012

Wondering if the yellow, charging light, sometimes coming on and going off is an indication of my battery going dead.  Mine is a UMBP and the battery hasn't been change.  Don't use it too much, though.

View 5 Replies View Related

MacBook Pro :: No Sleep Function With Power Cord?

Apr 8, 2012

My 2011 macbook pro does not go into sleep mode with the power cord on. The sleep light goes on, but does not go into "pulse" mode and the fans continue to run as well as the hard disk keeps running. 

The issue started a few weeks back. I have tried switching off the internet sharing and other possible settings that might hinder the MBP going into sleep mode when the power cord is in. I have even down loaded PleaseSleep but that does not seem to function either. 

Seems like a minor issue, but if the MBP does not enter into sleep mode correctly I am afraid the built-up heat might damage disks, rams or screen.

Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)

View 9 Replies View Related

MacBook Pro :: It Does Not Go To Sleep When Power Cord Is Connected

May 4, 2012

I have recently discovered that my MacBook Pro (2009) with OSX Lion does not go to sleep when the power cord is connected. It does not matter if I close the lid or select sleep from the Apple menu. All that happens is that the screen is powered off, the SIL is solid and I can hear the HDD/fan. I have not changed any of my power settings recently and it has not been a problem previously. If I disconnect the power cord the MB goes to sleep as supposed to (the SIL led starts flashing). 

Doing some research I have found other users with somewhat the same issues when VMWare Fusion is installed. I have done some further testing and it seems that if I disable the virtual machine's Network Adapter and quit VMWare Fusion the MB goes into sleeping mode when the lid is closed even with the power cord connected. Enabling the Network Adapter again prevents the MB to go into sleeping mode when the power cord is connected. This even applies when the VMWare application is shutted down. 

My guess is that the Network Adapter somehow prevents the MB to go into sleeping mode. The workaround is of course toggling the Network Adapter on and off but the virtual machine has to be running in order to do so. Not being that familiar with network settings on a Mac is there any other way to get around the problem? 

Info:
MacBook Pro (15-inch 2.53 GHz), Mac OS X (10.7.3)

View 5 Replies View Related

MacBook Air :: It Will Not Let The Power-cord Start The Computer

Jun 11, 2012

When I plug in the power cord it is not connecting and therefore not charging the battery.  Battery is deal and the MacAir will not turn on. 

Info:
MacBook Air, Mac OS X (10.7.4)

View 3 Replies View Related

MacBook Pro :: My MBP Hurt It's Power Supply?

Aug 30, 2010

At the beginning of the year my power supply died and Apple changed both of them. 4 months later, happened again. Now, 4 months later, it is happening again!

The power supply is plugged into a power strip with other electronics as well. The power supply keeps the laptop alive but won't charge it. If you unplug it the battery drains like normal. No light on charger, other chargers charge the laptop.

Do I have dirty power at my house that keeps blowing it? Nothing else has been effected.

Can a computer effect the charger? Please help! Still have 6 mos of applecare, but am tired of this. Would like to find solution.

View 2 Replies View Related

MacBook Air :: Use MBP's Power Supply With The 11" Air?

Nov 12, 2010

The MBP's a late '08 15" unibody. I know I obviously can't (or at least shouldn't) use the Airs power supply with the MBP.

View 5 Replies View Related

Power Mac G5 :: Using Molex Power Supply For Graphics Card

Oct 8, 2007

I hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.

Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)

View 1 Replies View Related

MacBook Pro :: Magsafe Power Adapter - Low Voltage Cord

Nov 2, 2008

I have found the magnetic end on ebay to repair my power cord ( one of the pins doesnt spring out anymore) Does anyone know how to get the power brick apart without wrecking it?

View 2 Replies View Related

MacBook Pro :: Power Cord Melted And Almost Caused Fire

Jun 21, 2009

So the power cord coming out of the AC adapter to the Magsafe melted and almost started a fire. There is about an inch selection where all I can see now is the metal wiring underneith, all the insulation is off. Is this covered under AppleCare? Since it was smoking and almost caused a fire, would this have harmed my MacBook Pro? I'm lucky that when I returned home nothing was damaged. How do I document this? What's protocol on issues such as this? This has never happened to me before.

View 24 Replies View Related

MacBook :: Power Cord Suddenly Stopped Working

Mar 3, 2012

I was charging my macbook. It was charging when I left, upon my return, after about 30 minutes, I found that the light was no longer green. There was no light on at all. I tried restarting multiple times. There are no stuck prongs in my power cord. I tried different outlets. I tested the outlet to verify it worked. My computer will charge fine with other power cords, but just not the one I want it to use? Is there anything else I can try before purchasing a new cord?

Info:
MacBook

View 4 Replies View Related

MacBook Pro :: Installing Updates - Power Supply?

Sep 20, 2010

Why does my Macbook Pro say that for "best results" I must plug it in when restarting and installing updates?

View 1 Replies View Related

MacBook Pro :: Power Supply Are Not Working In My System

Feb 9, 2010

I've been experiencing the following problem with my late 2007 MacBook Pro: I can't use it on batteries. As soon as I disconnect power supply, it works for 10-15 minutes and switches off. Not sleeps, but suddenly turns off completely. The system battery indicator drops by about 10% (showing 85-90% battery charged), whereas 4 out of 5 LEDs are lit on the battery itself. After such a sunned switch-off, I'm not able to start again the laptop - it doesn't react on Power On button - like the battery wasn't inserted at all. Right after I plug on power supply back again, everything gets back to normal and I can use it normally, but still only if it's connected to the electricity.

View 3 Replies View Related

MacBook Pro :: Replacement Battery And Power Supply

Jun 21, 2010

I'm just wondering if anybody knows whether it is possible to obtain a replacement battery and power supply for such an old computer. My 17-inch MacBook Pro is about five years old, and the battery seems to be completely dead. It will not start up, will not take a charge, and cannot be used, whether plugged in or not. A multitester test suggests that the power supply no longer works either. My MacBook has one of the older-design power supplies, with the circular port, rather than the newer, magnetic, rectangular ones. I'm planning on getting a new MacBook in the near future, but I need to access some things that are saved on my old Mac's hard drive, if at all possible.

View 3 Replies View Related

MacBook :: Power Cord Broke -wires Twisted Togather

Mar 5, 2009

I have a MacBook which I purchased in Feb 2007. It gets light daily use.

Over Christmas holidays in Dec 08, while attending a weeklong family reunion, the laptop was in use almost constantly by various family members. On the drive home, our daughter had the MacBook plugged into the power source in our minivan so she could watch a DVD. She noticed a scorching smell, and realized the plug at the computer end was smoking! That's when we noticed a series of small holes or tears around the plastic coating of the power cord where it attaches to the plug (just below the thicker sheath). The wires inside were twisted together and had shorted out.

We went to an Apple store and purchased a new cord. It cost $120!!!

While my MacBook is no longer on warranty and I do not have AppleCare, I want to contacting Apple about this. I am wondering if other people have encountered this problem. I notice that the new power cord has a longer plastic sheath between the plug and the cord; it is twice as long as the one on my old cord.

View 16 Replies View Related

MacBook Air :: Whenever Plug The Power Cord Computer Never Starts To Charge?

May 21, 2012

Whenever i plug the power cord into my mac book pro my computer never starts to charge?  I have tryed this on various different outlets and have also tryed thsi with the two and three pronged adapters and it still is not working. 

View 3 Replies View Related

MacBook :: Power Cord Does Not Light Up (green For A Second, Orange For A Second Then Dark)

Jun 12, 2012

MagSafe power cord for MacBook lights up green for one second and then lights up orange for one second, then goes dark. Battery shows MacBook has no power anymore, so will not boot. I cleaned the contacts and none are pushed down. What are my next steps?

View 1 Replies View Related

MacBook Pro :: Won't Turn On Even Though The Battery Is Charged And Power Cord Is Working?

Jun 26, 2012

This morning, my macbook pro laptop won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

Info:
MacBook
Pro, Mac OS X (10.5.8)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved