MacBook Pro :: Connect To External Monitor With Wireless Keyboard
Dec 8, 2014
I want to buy a 19inch monitor for my desk because I am going to start coding and the display on my Mac is too small and I want something a little bigger.
What I want to do is connect my macbook to the external monitor with my wireless keyboard and mouse connected to the mac and then close the lid and the display is on the external monitor. So in other words, my macbook is becoming a Mac mini. Â
I just connected an external monitor to my Macbook Pro, but it only works with an external keyboard so far. Is there a way I can use my macbook's keyboard? I don't use the mirror option btw.
The monitor came with the VGA cable, but not a DVI-D cable. Should I get the DVI-D cable and adapter instead of a VGA adapter? Why do I ask, because the adapters both cost $34 each (I'm Canadian) but the catch is for DVI I would have to add an extra $20 for the cable and I'm not sure if it's worth it or not since I'm tight on money.
Should I worry myself over getting a DVI adapter AND the additional cost which is the DVI-DVI cable?Already answered:Just like Windows which makes it super easy, I tried searching but didn't find the right solution... Does anyone know how I can extend the my MBP's monitor to my external as I can do this on my PC -> External but can't get it to work from my Mac.Just to clarify, I want to do this via Leopard, not XP, Vista or 7.
What is the best way to hook up MBP to Syncmaster B2430? Everything looks great but the text. It's not sharp and there are random white dots that are on each letter. The pictures and videos are great. The color is nice and bright. But the text bugs me. I currently connect with an HDMI cable. Isn't DVI the same as HDMI, minus the audio?
Upon receiving the monitor, I immediately plugged it in to my Macbook, using the Mini-DV to VGA adaptor I already had, for use with projectors. The monitor was good, but a bit blurry and not too sharp, due to the analog signal. So I ordered a Mini-DVI to DVI adaptor. When it arrived, the improved picture quality was immediately apparent.
However, as time went on, I noticed my wireless connectivity was getting terrible. Extremely slow Safari page load times, and upon going to Terminal and pinging my router, I would often get response times of 21000 milliseconds, or worse! I did a lot of research, on router firmware, on wireless connectivity, etc., but to no prevail. Then, on a whim, while continually pinging my router, I removed the DVI adaptor from my monitor. The ping instantly dropped from tens of full seconds to just a stable 0.4 milliseconds! Using my VGA connection resulted in no worse wireless connectivity than without it, but upon plugging in DVI and stressing the connection a bit (i.e. downloading a large file), the connection went bonkers. The pings also immediately jump from 0.4 milliseconds to a range of 1-4 milliseconds, regardless of any "stressing".
can you guys please recommend me a good external mouse and keyboard that I should get to complete my MBP + External Monitor for my dorm room. p.s. if you recommend the apple keyboard, please tell me which one of the 3 is the best (bluetooth, wired with keypad, wired w/o keypad, and why,
But is there a preferred brand of adapter to connect a monitor with a DVI port to the Mini DisplayPort on my 15" MBP, like Monster? Or what do you all recommend?
I recently bought a monitor to my desktop and a dvi to mini display port cable. It worked fine for a couple of weeks but now it won't connect with it. The monitors little light symbol turns blue for a couple of seconds but then says No signal. In the beginning i just had to shut down my mac, log in go plug it in but now it just won't work.
Okay i got it all set up but when i close the lid of the macbook it gos to sleep i only want it to turn off the macbooks screen so i can use my ext stuff i got?
If I connect a external monitor and keyboard to my late 2011 Macbook Pro (running Lion) it starts up just fine. But if I try to start it up without these (or any other devices) attached, I get no display on the internal screen and the internal keyboard is ignored (the caps lock light doesn't light up when the key is pressed). However, I don't think it's a hardware issue, as a PRAM reset seems to work (I get the second chime) indicating that the keyboard is OK. And I get a second or so of grey screen before the screen goes black. I've tried resetting my SMC and my PRAM. The latter seemed to fix the problem once - but then it came back, and won't go away again this time. I've also tried starting in safe, single user, and verbose mode, but none of these seem to make any difference. I've been having some issues installing Windows (under both BootCamp and Parallels) but wouldn't have thought that these were related.
Info: MacBook Pro, Mac OS X (10.7.3), 2.5 GHz i7 4GB 750GB 7200RPM Matte
If I was to hook my MacBook Pro 13inch 4GB RAM, 250 HD to a monitor and use the Magic Mouse and Apple wireless keyboard would it slow the performance of my laptop?
My daughter is entering college this fall and will need to use Adobe Creativity series including photoshop,illustrator and indesign. Will the Apple MacBook (Core 2 Duo 2.4GHz, 2GB RAM, 250GB HDD, 13" display) be sufficient to run this software without problems? Would the Macbook be adequate if connect to a larger external monitor?
I'm trying to connect my MacBook to an external 19" Samsung LCD monitor. I connect using a standard Apple mini-DVI to male DVI adaptor, which in turn is connected to a third party female DVI to female VGA adaptor, which in turn is connected to a VGA cord which connects to the monitor (male on both sides).
My monitor shows up in the System Preferences display settings, where I can control everything properly, but the screen is black. I can move my cursor over to the other screen, so it seems the MacBook can recognize the monitor. The monitor connects fine using the VGA cord to a Thinkpad.
Is there any inherent with this connection configuration?
I used to have a mac Mini that connected so effortlessly to the monitor and allowed the full resolution (1920x1080). But I'm trying to do that with my MacBook (as I recently sold my Mini) and I'm unable to get it to do what I want to. I have Snow Leopard. It would not allow me to do anything until I updated the OS. The monitor was not recognized at all. Except I noticed when I plugged it in, the macbook screen would flash...so I figure it's recognizing something. But in display settings, detect display wouldn't show anything, neither would restarting. That is, until I updated Snow Leopard.... Anyone know why this might be? And now that I've been able to get something on the display, I'm still not at all satisfied. The resolution is terrible. It will not allow me to choose anything other than the resolution on my macbook screen, but over 23" it just looks terrible. Not only that, but the Macbook screen stays on. I want the mb screen to go off, and full resolution be on the external monitor. I can choose another option for an extended desktop but that's just ridiculous. I have no desire for anything like that.
I Late 2008 Macbook Pro. My needs have shifted lately, as I am now using it mostly with an external display. I ran it into my 23(?) LG 1080 LED monitor with no problem. I recently bought a Samsung 27' Syncmaster SA550 monitor. I am in love with it, however I cannot find a display size that fits the monitor. I am currently running the 1080p resolution setting on my computer but it is easily 2-3 inches too small. And with overscan its too big to see my menu bar and dock at all. Running at a 24-25' screen size is still much better than my 15 inch macbook pro screen, but it would be awesome to use all of the 27 inches of this monitor. I have been unable to find a working setting, if there is a trick, or a way to setup a custom size As well I am running this as the sole display (not dual screens)
I am currently am using a MacBook Pro mid 2007 and was wondering it is possible to connect it to an external monitor and if so use it when closed without the comp going into sleep mode.
1) Are there any plans from Apple to produce a WIRELESS keyboard WITH keypad? To be specific: a new keyboard with the exact same interface/layout of the regular keyboard with numeric keypad, only WIRELESS.2) Is the Wireless Apple Mouse (AKA Wireless Mighty Mouse) now officially discontinued?3) I was told here that the discontinued Apple Cinema Display HD 23" monitor had an update in fall 2006. The update was technical-internal (not external or cosmetic in any way, right?). I would really appreciate any information regarding that update.
Being that most Macs have built-in Bluetooth connection capabilities, does anyone know a way to connect 3rd party wireless keyboards & mouses without using the Nano USB receiver? There has to be a way to do it, isn't there?Â
Once I have enough money saved up and can afford a wireless Apple Keyboard and Magic Mouse, I'm stuck with the GE setup that I currently have.Â
Info: MacBook Pro, Mac OS X (10.6.8), 17" Intel Core 2 Duo 2.4GHz 4GB RAM
I have an old PC monitor that I want to connect to my new 27 inch iMac, it's the latest edition, the one that doesn't have any mini display ports.All I have are four USB 2.0 ports and two Thunderbolt ports. No mini display port of any kind. So is there an adapter for me? My old monitor can use either VGA or HDMI and I'm not really fussed which one I use. A link would be most helpful, surley that are more people with the same problem.
I have a blackbook (intel core 2 duo) and I can connect to my landlord's wireless network (they have a netgear wgt624) but I can't actually use the web (Safari or Firefox will just "think"). I've tested the diagnostics and it confirms that my mac can connect to the network, but it cannot connect to the internet. The network uses WPA personal and it has a 19-aphanumeric passphrase.
*Also - would it be possible for me to extend the wireless range (and make it possible to browse the web) if I used my own 2wire wireless modem to connect to the netgear wgt624?
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?