I just got my macbook week ago. i noticed that the menu bar had a slight pink color on the right side. i went on the apply website and read on calibrating the display but it still has pink lines. anyone has the same issue. also does it matter if we calibrate the display or not. and finally, i read on some site that we supposed to calibrate it in the dark, which i did not do. is that the reason i am still seeing pink color.
View 8 Replies
i have recently spent several evenings re-calibrating my Dell U2711 display and have finally come up with a fantastic image so I thought I'd share my results for those having trouble calibrating this display (given the low quality AG coating this display comes with, calibration can be quite tough). Plus, during my Google search, trying to find some calibration tips, I was surprised at how little I found. Most of the forums I went to are discussions about the AG coating with hardly any talk about calibration. So, because of that, I figured I should share my calibration steps.
I edit video so I managed to come up with a calibration that shows great shadow detail (without crushing the blacks) yet still gives a deep, rich look for the graphics as well. Everything from the highs to the lows look great! And parts of the screen such as the dock look so vivid it's hard to distinguish from an Apple Display in terms of richness and clarity (without the shine, of course). You can still see the grain of the AG coating on bright areas of the screen but it's hardly distracting at all. On a side note: this is a great display for editing video even with the AG coating but if you edit still photography I would stay away from the U2711 entirely: still image + still grain = disaster!
Unfortunately I don't know much about internal computer system settings or if all displays that Dell ships are identical, so I can't say for sure that the calibration I did will work for everyone. However, if all Dell Displays and Apple computers (I use a 2010 MacPro) are 100% identical when shipped, then, if you follow my steps exactly, you should be able to come up with something similar to what I got. But I can't say for sure:
Step 1: Setting up the display.
Set the contrast to 100% and the brightness to 80%. Set the Gamma to (Mac), the Mode Selection to (Graphics), and the Preset Mode to (Custom Color). Now, in custom color leave the green at 100% and set both the Red and Blue to 98%.
Step 2: Setting up the Mac.
Run your Mac's Display Calibration Assistant (located in the Display section of System Preferences). Select the checkbox for Expert Mode and keep clicking continue till you get to the section with the lined boxes with the Apple logo in the middle.
Now, for all 5 'lined box' steps, make the Apple logo disappear using only the left slider (do not touch the right slider at all). To make the Apple logo disappear (blend into the box) you must squint your eyes until the lines that make up the box itself become one solid color (my eyes were about 75% closed). Take your time and make sure you are confident that the Logo is gone.
Then, when you come to the gamma screen either select 2.2 or 2.15 - the proper setting should be 2.2, however, I found the blacks to be not as deep as I'd like them to be (most likely because of the AG coating) so I choose 2.15 which I found to be the key to giving the display the richness it needs to look great.
When you get to the 'Target White Point' screen, select the checkbox 'use native white point'.
Then save you calibration profile and exit the assistant. Now go back to your Dell display settings and set the brightness to 100% and you should be good to go! Note: if you find your screen to be a little too dark, re-calibrate but try selecting 70% or 60% for the brightness during step one. That way, when you raise the brightness to 100% at the end, it should be somewhat brighter.
I hope this works as great for you as it did me! And even if it doesn't, hopefully you will end up with something half decent. But either way, please do share your results - I know there are a lot of people out there struggling with this display because of it's AG coating and some are even attempting to remove the AG coating with bad results. I even considered removing mine but now I am glad I didn't take the risk (I suck at doing those type of mods, haha). Now, my display looks almost as good as an Apple display (and without any glare!
I recently got the Dell U2410 and I felt like out of the box the color and everything was way off, and certainly no where near matching how things looked on my MBP screen. I went through the little calibration process in the system preferences (with the advanced options) and it's somewhat better (I don't think the gamma was at 2.2 before), but it still doesn't seem so great. The brights look kind of blown out, the shadows are a bit too black, and some of the colors look off. Also, if I look at a solid color I can see moving lines (almost like a much more mild version of when you record a computer screen with a camera running at a different refresh rate).
Did I get a crappy one, or do I need to do something different? I had heard so many good things about this monitor and now I'm considering returning it for a 24" ACD.
i am about to have my first mac, a macbook pro. I live in Turkey and Apple prices are really of the roof here. So i ordered it from Amazon to save 1500$ and had it shipped to my friend's house in USA. He will bring it with him when coming here to Turkey. I ordered on 16th of June, delivered on 23th of June and i will be getting it tomorrow. Problem is i heard that it should be calibrated within a week after buying. I suppose this wouldn't be a problem right? I mean it should be a week after booting it i think?second question is about using while calibrating. I know i can use my laptop when it is fully charged and resting on that state for 2 hours but can i use it while it's charging.
View 4 Replies View RelatedI just read how to calibrate your battery, and I found out that I've been calibrating my new MBP 13" battery pretty much every day (unintended). I've been using it quite heavily since I got it last week... charging it fully, and reconnecting it to the charger whenever the battery hits somewhere around 10%.. Is this good or bad ? Should I charge it whenever it hits 50% instead ?
Apple says we are supposed to calibrate it once a month. Is it bad if you do it more often ? Any thoughts on this ?
I calibrated my battery last week and I'm pretty sure I'm getting worse battery life after the fact. Has anyone had this experience? Can battery calibration hurt your battery?
View 12 Replies View RelatedI'm looking calibrating my SyncMaster 206BW with my New UMBP. I realize that its going to be a little off because the screens are two different types.
View 1 Replies View RelatedI've done everything correctly that the apple described 'bout calibrating and its not lasting even 2 hrs. All I do is surfing. I have the brightness just one block. No keyboard illuminate. Bluetooth is off and for me to get 'round 2 hrs. I gotta keep closing the macbook's screen.
View 2 Replies View Relatedim not sure how to calibrate since i just learned that i have to do it to ensure battery life but im gonna use all the power in the afternoon and at night i will let it sleep but i dont want to wake up to charge it if it can only sleep for 5 hours.
Info:
MacBook Pro
What effect will the macbook have, if i fully charge and discharge the battery on a daily basis. I will leave it running on battery power when i leave for the day, and let the battery drain/discharge fully through the night.I will hook it back up in the morning to have it fully charged, may be 30 - 60 mins after it being fully charged, i will pull the power out and run the laptop the whole day on battery.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I usually use my 2209WA connected to my Desktop running Windows 7, but sometimes I'll connect it to my MBP. Windows seems to have found a color profile that works very well, which it got from Windows Update, created by Dell, presumably.It might not be good enough for someone who needs 100% accurate color, but it's good enough for me.
I tried two different profiles for this monitor connected to my MBP. The first was one I downloaded from a forum somewhere, and the second was the one Windows is using, copied over. The display looks OK with both, but the color depth isn't nearly as good as it is on Windows. Connected to my MBP, the colors look washed out and flat, while the same colors are much richer when the monitor is connected to my PC. For example, pure blue (#0000FF) looks faded when the monitor is on my MBP, and much deeper when it is on my PC. I tried changing the gamma setting under OS X (manual calibration), but it didn't have much effect. It is set at 2.2 for both 2209 profiles and for my MBP LCD's profile.
How can I make my monitor properly calibrated when it is hooked up to my Mac?
In both cases I am connecting the monitor with DVI (just moving the cable since I'm too cheap to buy a switch), and both OSes have it set at native resolution. The settings on the monitor (color, brightness, contrast, etc) do not change when I switch computers.
Point 4. Says the computer will automatically go to sleep and then point 5. Says I should turn of the computer. Isn't it the same of the computer stays in the sleep mode?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I recently purchased a HP 2009m glossy 20" monitor. I have a late 2008 model macbook pro (glossy). I have been having a hard time getting the colors and whites to look exactly the same. I have tried calibrating the display over and over but the whites never look exactly the same even though the default white points are the same for both the macbook pro/hp displays. Any hints outside of getting a sensor/external program?
View 1 Replies View Relatedis battery calibration as simple as fully charging and then draining battery ,or is there more steps?
View 4 Replies View RelatedI calibrated my MacBook Pro battery and then noticed that the battery life seemed slightly shorter after that. I calibrated it according to this: [URL]
Just wondering if I have done anything wrong...
One more question... What do they mean by "At this point, save your work. Continue to use your computer; when the battery gets very low, the computer will automatically go to sleep." Does it mean that I have to use the computer until it just shuts down or should I shut it down once the "Low Battery" warning pops up?
Info:
Logic Pro, Mac OS X (10.6.8)
My machine: 17" 2.33ghz mbp.After installing Snow Leopard, when trying to calibrate the screen it gets to the end and then reverts back to the ****** default snow leopard calibration and says: "An error occured. The new calibrated display profile could not be created or set to be the current profile for this display."also, i noticed they spelled "occured" wrong. It should be "occurred" no?any of you guys have this issue? and if so, how do we fix it?
View 6 Replies View RelatedI have a Kodak ESP 3200 ink jet printer that normally does an acceptable job with non-critical illustrations etc..However, when I print photos, I would like to have appear more closely to the colors of the photos when they are displayed on my iMac when photo paper is used.How can I caliabrate either or both my printer and iMac so that the colors of the printed photos more closely match what is shown on the iMac?
Info:
iMac Snow Leopard / MBPro Lion, Mac OS X (10.6.2)
My wife's macbook monitor is destroyed due to happy 2 year old. It won't be worthwhile to replace the monitor and it is not fixable without some expensive work being done on it, therefore I would like to use our TV as an external monitor and retire the macbook to being a mediia computer. I have connected it to the TV, and I see an empty desktop, as far as I can determine it looks like it is treating the TV as a secondary display - that the desktop is extended onto - so I cannot actually interact with the normal desktop. When I try to run things using keyboard shortcuts I hear some sounds of things starting, but I don't see anything on the TV. So what I need to do is to have some way to tell it to treat the secondary display as the primary display.
Info:
iPhone 3G, Windows XP
I hooked up my macbook pro to a mini display port to a dvi -> hdmi to my tv no problem. However, when I hooked up the mini display -> dell monitor, I get nothing. The screen is black. The weird thing is that my macbook pro recognizes that a second monitor is plugged in... it just won't display anything
View 9 Replies View RelatedMy external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
Info:
OS X Mavericks (10.9.4)
if i Connect my Macbook air to the apple Cinema Display through thunderbolt is the air getting power supply through the Display?
View 1 Replies View RelatedI have a mid-late 2008 MacBook connected to a Dell U2211H monitor using a Mini DisplayPort -> VGA connection.
When I use 1920x1080, I only get 60 Hz and the display is a fuzzy (text). Also, there are black bars. Why?
Will my issues be solved using a Mini DisplayPort -> DVI connection? Or should I exchange it for the 2209?
My brand new 15 inch MacBook Pro was working fine for a week. Today the display went to sleep and when I tried to wake it, it remained dark, items barely visible. I could see the display brightness meter changing, but the brightness did not. Restarting didn't help. Called Apple and they're going to replace the computer. Has this happened to anybody else? Note: I have the hi-res anti-glare display.
View 3 Replies View RelatedI have an early 2008 MBP 15" (I think detailed specs are in my signature) and recently (over the last week or so) when I move my laptop display up and down (physically), the screen has this thing where it gets inverted and what not. It is very annoying, and I have been having to constantly fiddle with it everytime I move my laptop around (I use it both as a desktop and as a laptop, so this happens a lot). I recently switched to using it clamshell mode as a means of avoiding this in desktop mode, but occasionally I'll still need to move it around places and what not. I was wondering if anyone has had this problem before, or has any ideas as to what might be a better solution. I would take it in for repair, but I don't really have 300+ dollars to spend on a repair right now. I think it might be related to the data cable connection to the display of the computer, since it is rather intermitment, and requires fiddling for the screen to not be inverted/messed up/displaying black lines, etc. I can post more details about it, pictures or something if that would help any of you geniuses out there as well.
View 2 Replies View RelatedI have a Macbook with Snow Leopard and I plugged an auxiliary display on mini-dvi port. The display of the Macbook is my primary display and the other is the secondary. Is there any way to set the auxiliary display to be primary and the Macbook display to secondary?
View 3 Replies View RelatedI have the Apple 24 inch LED display which has the glass panel. Do you think it would be strange to pair the 15 or 17 inch MBP with the matte anti glare display with the 24" display? It would be used mostly with the external display so I'm wondering if it makes more sense for both panels to be the same. As I already have the external display I'm not open to getting something else. I'm just wondering if having the different types of displays would mess with my eyes.
View 5 Replies View RelatedI use MBP (late 2011). I find the hunderbolt port to be similar to the mini-display port of older mac. I wish to have another display, but not ready to spend $999 over a thunderbolt display from mac. So would like to know if a Mini-diaplay port converter from apple would help me connect a exernal display via the thunderbolt port?
Info:
MacBook Pro, Mac OS X (10.7.4)
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
If there's a thread on this, feel free to close this one, but I searched and couldn't find anything. I need a guide on how to remove the display casing on a unibody MBP with an anti glare screen. Specifically, how to remove the actual top shell, where the Apple logo is. The LCD panel itself, I don't need to take apart. Is this possible? If someone has a link to a guide, that would be awesome.
View 4 Replies View RelatedI'm used to using the keystrokes control-shift-eject to put the display to sleep without activating the screensaver or putting the whole computer to sleep.
Since the new Macbook Pro with Retina Display lacks an eject key, the best I have been able to do is set a hot corner. I don't like this as much -- especially since it is possible to trigger the hot corner without intending to.
