MacBook Pro :: Still Seeing Flashing Folder At Start Up After Replacing Hard Drive
Sep 9, 2014
I replaced my hard drive after it crashed. I formatted the new drive and installed mavericks from a bootable flash drive. I first tried installing lion over the internet, it took over 40 hours to load on an ethernet cable and quit when it was 98% done saying it could not download additional components. I then tried the flash drive thing, which was just as painful as a process. It would not install on my hard drive, saying the partition was damaged and needed to be repaired, however disk utility could not repair it.
I recreated the partition about 50 times and it never worked. Then I erased the hard drive and started over, and mavericks was able to install. I used my computer for about an hour, setting everything up and what not. I then opened my computer for the first time since, and nothing would work. It wouldn't even restart or shut down. So I forced the power off and when I turned it back on I saw the flashing file with a question mark again.
I Was skyping with a friend went to do something came back i was signed out of skype and my computer froze i restarted then it gave me a blinking file witch means failing hard drive so i put in my old hard drive that i knew works and still gives me a blinking file macbook pro 08 running on mavericks osx and something been running down ram for awhile to where it was not usable i had to keep running memory clean ...
When I start it up I get the Apple "chime" then the flashing folder with a question mark. Have tried all the standard procedures, ie. reset PRam, try to reboot i safe mode, single use mode etc... to no avail.
I can reboot from the install drive.
When I go to disk utilities my System Hard Drive shows up, passes Repair Disk Permissions as well as Repair Disk.
I can even go into Images>Scan Image for Restore and see all the files on my HD are still there - Documents, Photos, Apps, Desktop, Music. It shows how many folders and files there are. I can aslo go into System Profiler from the startup disk and the HD structure seems fine. So, I don't believe I have a catastrophic HD failure, but something else with hardware etc... Is there a ROM chip on a Mac that holds boot info similar to a Windows machine that has a BIOS chip? IF so, has anyone heard of these going bad?
I am not a hardware guru, but it seems it is not reading the startup files. So, I reinstalled the system using Archive my data and it still will not boot. I really need to save the data off this HD. It is under warranty.
Today my I had used my macbook like normal and all of the sudden it was frozen for an extended period of time and would not respond so I had to hit the power button. When I turned it back on a folder with a question mark flashed on the screen. I did some troubleshooting and tried "safe booting" but it took forever and it didn't fix anything. I don't have my original installation DVD because I am a college student at home for spring break and it is at my house back at school.
my Macbook wont start-up. When I switch it on it comes up with a flashing folder with a question mark in. I have been advised to start from my Mac OS X installation disk.
However, the website says "Insert your Mac OS X installation disc (if you have discs with both versions, use whichever is closest to the Mac OS X version installed on your Mac; do not use a startup disc which came with a different Mac or which contains an earlier version of Mac OS X)."
My original installation disks are Mac OS X 10.4. But I have been upgrading my system. My last upgrade was to Mac OS X 10.6.
Which disk do I use? Do I use the 10.6, as this is the one with the current operating system or do I use 10.4 as this was the original disk that was bought with the macbook.
I had this previously and did a complete erase and reinstall. This time I have reset my NPRAM and used disc utility, but no issues found. On console I have this message recurring com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory?
I have a lamp style iMac and when I boot it up I get the flashing folder from the mac face to the question mark. I booted it up with the OS X DVD, but a padlock comes up. I have never set a password for this computer, except to login, and that password isn't working. Is there a way around this? I've tried everything I can think of.
I have not been able to startup my iMac for 3 days. When I turn it on all I get it is a white screen. After about 10 minutes a folder with Question mark inside apears in the middle of the screen and it just stays like this. I unplugged everything from the computer except for the mouse and keyboard. I had this computer since 2008 and never had a problem until now.Please help
My brother's MacBook's hard drive just died. He has a backup of all of his data. If I were to buy this, what do I do after installing the hard drive? We have the Leopard disks and everything.
I am going to be replacing the hard drive on a macbook pro that went crackle and fgave me the spinnign wheel of death before it totally went dead on me but i dont have the discs to reinstall the OS (and to be honest I forget what version it is) on this laptop but have the discs for my imac. Can I use these discs or do I need something else? I got this from a former roommate who upgraded to a newer macbook and was going to toss this so there are no discs for this macbook. Totally at a loss here....not sure if the data is recoverable from the hard drive so need to know what my options are before I take it in for repair tomorrow....
I just replaced the hard drive in my macbook pro 2011 with an agility 4 ssd. I was able to copy all of the information over to the new drive. However ever time I wake the system up from sleep it freezes. I get the pinwheel. I am forced to restart the computer to get it working.
I do a lot of traveling and have a lot of video files that I like to take on the road with me. I saw a 500gb Western Digital 2.5 hard drive on Amazon.com and want to replace my 160gb hard drive with it. I have an external hard drive with time machine. Is there anyway to do this so that I do no have to re-install everything?
The hard drive in my MacBook is turning 3 years old, and weird noises are being emitted from it, which means, the hard drive is on it's last legs. The stock Apple hard drive was an 80GB. Specs of the MacBook are in the sig. I was thinking to myself, why not take this as an opportunity to get a much larger hard drive for not that much money. So I came across this: http://www.bestbuy.com/site/olspage....=1218030894682 Question is, would it fit the MacBook White from 2007, and how does it perform?
I'm thinking of getting a refurb MBP but they come with a 5400rpm hard drive and I want a 7200rpm. Does anyone about how easy it is to replace the internal hard drive in a MBP and how much it would cost?
I recently thought it would be a smart idea to volunteer to replace the failing HDD on my friend's Macbook (white, late '07 model), since she could get a higher capacity than 120GB this way, as opposed to getting a replacement at the Genius Bar. I went on ifixit.com, since I was able to change a couple of components on my 1st generation Macbook Pro without much trouble, and followed the guide step by step. Now, I am no rookie with this stuff. I even used to work at an Apple store, but as a specialist, not a genius. However, when I did everything (and it would seem that the installation itself was done properly), the computer screen would remain off once I booted the computer.
I tried changing it back to its original drive to see if I could at least get it to boot, but the same thing happened. Nothing on the display. I tried starting up while pressing C to run from the Snow Leopard disc, I tried starting up while pressing Option, I tried everything I can think of. I am running out of options and I have no clue what to do. Is there something I should have done before putting in the drive? Does anyone know what could be done, aside from taking it to the store and paying the $200 for an HDD replacement? (my former co-workers at the GB seem to be MIA for this).
I have removed the 2.5" Hard Drive from my better half's 2006 Macbook and looking at the Seagate I got to replace it the power pins don't appear to line up.
I can't see deep into where it seats. Do you have to replace the HDD with specific makes of 2.5" HDD?
Saturday, my Macbook was working ok and I left it for a few minutes. When I returned, it instructed me to press and hold the power button to restart it. I did, but the only thing that came up (and still does) is the gray folder with a ? flashing. I took it to the Apple store and they said the hard drive was dead and wanted to sell me another hard drive. A different computer repair person (not at Apple) told me that he could re-install the operating system but that all the files would have to be wiped from the hard drive.. Now, I'm just a bit confused and think this hard drive might be salvagable. The Apple store said the hard drive is not even visible with the test they ran. However, Apple.com gives me an option to insert the installation disc and try rebooting. I bought this remanufactured and it did not come with a disc. I do NOT have those discs.
Question: is there anything that I can do to recover the hard drive, or, at least, the files I stored there? I just restarted it, held down Cntrl C and the screen is gray with no flashing ?.
I was going to get a 500GB hard drive to replace my 160GB hard drive in my white macbook. I was wondering where's the best place to backup the data online before changing it out? Carbonite?
I swapped my hard disk on the above mentioned machine and it won't boot. When I turn the machine on it tells me that there is no bootable disk. I have previously booted from the disk via usb, so i know there is a bootable partition on it. I swapped back the original drive and it boots up fine. Why wont the external drive boot when run internally?
I own a 1st generation MacBook Core Duo (black) with 80GB Fujitsu at 1.5 Gigabit/s. I want to replace this with a compatible hard drive. Will this - Western Digital Scorpio Blue WD3200BEVT 320GB 5400 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive - work in my laptop? I notice that it has a 3.0Gb/s speed versus my current Fujitsu 1.5Gb/s. I'm using Tiger, if this matters.
After seeing the system requirements for Windows 7, I decided to upgrade to a larger hard drive later this week. I plan on giving my old 160 gig drive to a friend who uses Windows but I want to wipe it clean first. Do I insert my Leopard disc and use disk utility to reformat?
The HDD in my wife's black MacBook (2007, I think) won't boot up. I've run Disk Utility and have decided it's pretty much dead. I have a Carbon Copy backup, so the data is fine. I've tried replacing the drive twice now, and the MacBook simply won't "see" the new drives. When I install the drive, nothing shows up in Disk Utility (run either from the install disc or the Carbon Copy backup drive in a USB enclosure).
The new drives are formatted (I even copied the bootable backup to one of them), and the computer sees them just fine if I install them in a USB enclosure and hook them up that way. When I put them in the computer, though, no dice. Her old, corrupted HDD still showed up in Disk Utility when I reinstalled it, but the new drives don't.
Someone I know wants to buy a macbook air. I've replaced hard drives on Sony's, lenovos, macbooks etc. But I know some Sony's come with special "non-standard" drive sizes. Does anyone know if the Seagate Momentus laptop drive will fit in the newest macbook air? I saw on anandtech you could replace it on the previous model but I thought I'd double check as she needs much more space than 120GB that apple offers.
I have all the data double-backed up so I'm not worried about that, but assuming I have to replace it what can I get? I'd heard that you can put any 2.5" SATA drive into a late 2008 15" mac-book pro, but occasionally I see consumer reviews saying things like "only compatible with 2009 mac-book pros onwards" or "not compatible with lion".
Replacing a SECOND failed hard drive on a mid-2007 white macbook (Intel core duo 2.16GHz), this time on my own Need to purchase a serial ATA drive, but I keep reading that trying to format and/or partition the drive for use with the original Tiger install disk is unsuccessful and that I would have to update to a newer OS before I can do that. I have Leopard as the current OS, and that is in my backup files from Time Machine, but I do not have a disk with Leopard. Wondering the best course of action and/or if someone had success wit ha particular Serial ATA using the Tiger disks?
I am wanting to replace the hard drive in my macbook but I don't have the os disks that came with the computer (I've recently moved and they're beyond lost). I've read where apple can send me replacements (I assume I'd have to pay for them). Can I get the leopard upgrade and use that, or it just that, an upgrade and I need osx already on the computer. I don't care about backing up anything, as theres nothing on it of any importance, all my music and photos are on an external hard drive.
I just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions: http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
