MacBook Pro :: Retrieve A File From TimeMachine After A Clean OS Install?
Mar 29, 2012
I'm having a lil dilema. I need to do a clean install on my system due to a few devices that i accidently erased while configuiring my audio settings.
anywho, I just need to know:
I have been backing up my files with Time Machine on to a Western Digital Network HD on my Home Network. If i do a final back up and then Install a clean copy of OSX Lion [Format My system HD], will I be able to restore my personal files using time machine back up I have on my Network HD?
Info:MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I'm upgrading from Leopard to Snow Leopard later this evening using the clean install option. I'm using a 2009 13" MBP. I have everything backed up to TimeMachine, but I just wanted to check that my entire iTunes library will be able to be recovered back into iTunes from TimeMachine after I complete the clean install of Snow Leopard. Also, is a time machine backup enough or should I be paranoid and back up everything to another external disk?
Recently I did a clean install on my MBP after a 4-generation-old OSX 10.6.8 TM backup got way too slow (I had used it with my old MBP, then restored to a 24" iMac, then a 27" iMac, and then to the new MBP).
However, with the clean install I did obviously not create the exact same user name / account I had before, so I cannot access the TM now. I'd like to extract some of the folders from that backup, mainly images I am missing and some data.
Info: Mac OS X (10.6.8), mbp i7 17", iMac 27", iPad, i4
I'm a bit nervous about this - first time I have used the TimeMachine backup. It asked me to relaunch iPhoto from the backup, but I was worried I would lose recent stuff so I stopped.
I want to access a photo from giving 2010 - when I went to my current iPhoto library, one of the kids has been fooling around with the touch-up and given everyone panda eyes, so I want to find the original when it was first uploaded.
My iTunes music files were stored on an external hard drive. But, unfortunately, the iTunes library file must have been on the laptop hard drive. Now, when I open iTunes music library and playlists are empty, despite my having 120GB of music on the connected hard drive.
Short of dragging and dropping all the music files into the iTunes window, is there any other way of "telling" iTunes where to find my music? I have tried "organize library" and nothing happens.
I first submitted this in another section of the forums thinking it had to do with my external HD, to only find out later it's a problem across my entire iMac, not just the external. It's nearly impossible to transfer files from anything other than my internal HD *to* my internal HD. What I mean is, when I try to move a file from my external HD, a shared computer via ethernet, or a mounted .dmg, it's transferring at something like 1mb per second or less. I got my copy of Leopard (10.5.6) 2 Fridays ago (I know, I'm late), and first did an upgrade. Everything was wonky, so I did an archive & install. Everything was still a little unstable feeling, so I opted for a clean install. I moved all my precious files over to my LaCie FW HD, confirmed them, and started onto the clean install and let that run while I slept. When I woke up, I had a brand new fresh installation of Leopard with the glorious BG, and I couldn't have been happier.
I started to move my files over manually (I wasn't using the migration assistance because I was organizing my files as I went considering time was not an issue), and first on the list was my music. I opened up iTunes, set my prefs, and started to import from my external HD. ..I just assumed it was taking a long time because I had around 7000 files of both music and video. But when I went to work, came home, took a nap, woke up, and it still wasn't done, it made me wonder. I assumed it was Spotlight doing it's thing on top of the iTunes import, and left it alone. But now when I'm trying to move over files only a few mbs, it slows to a halt. I tried to install Adium from a .dmg by first moving it into my Applications folder.. it's something like 50mb and it took about 10m. I had been expecting to drag the icon over and here that "ding" you hear when a file has successfully moved. The funny thing about this is that, when I look at the Activity Monitor, nothing's really doing much of anything. So then why is it taking 5hrs to move over a few gigs? Here's a screen shot:
I wasn't sure where else to put this and I know people here have TimeMachine/backup experience. I don't know if this is true after every system software update, but after applying 10.5.6, Time Machine wants to backup 70GB worth of stuff. That's an additional 70GB worth of space taken up on my backup drive. I'm guess that that is all of the file differences because of the update? it so happens that I have a little over 71GB worth of stuff on my drive total. (What can I say, I leave a small footprint and archive a lot off disk). So it basically wants to back up my entire drive all over again. Is this normal? I could nuke the existing backup and just start fresh and not be concerned with losing anything.
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
My MacBook hard drive has about 70GB of data on it but the corresponding TimeMachine-generated Backups.backupdb folder on my firewire-connected hard drive only shows up as 1.15GB. Has my computer backed up properly or am I having serious problems?
i just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
I have recently done a Time machine back up of my MB Pro 15" then wiped my hard drive trying to clean it up so I could install Windows 7 with Boot Camp. I had my original Install Disk which I forgot was Tiger, Having used one of my brothers company licenses to upgrade to Leopard but that disk is now with him in another country. So now I can not restore from my Time Machine backup. I have a Leopard Install disk for a Macbook Pro 13" which I also own. Is it possible to use this disk to re-install Leopard on my 15"?
just got my MBA today and followed the clean install sticky here. However, I did not get the options to remove some of the software listed in the instructions.
I just checked the space and it looks like that the install took around 9GB of space? Is that correct? Bear with me where as this is my first Mac...
Basically, the guys at the Apple store said the hard drive on my 2008 entry-level Mac book had died so I went out and bought a new one from Western Digital.
But when reinstalling, the screen froze on 'verifying destination volume', then packs up and suggests I start again.
Searching this forum I see that others have had this problem and that one solution is to perform a 'clean install'. My question is, how do I go about doing that?
I am going to change out the hard drive in my 13" macbook pro and Ihad a question. I am wanting to do a clean install, so I am wanting to put in the new hard drive, install snow leopard... Then take the old hard drive and put it in an external enclosure to retrieve all my itunes music, files, etc.
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I did a fresh install of Mac OSX on it and then booted it up from the CD again and did a zero-out. I left about halfway through and when I came back I never had any confirmation that it was done so I did another zero out. Again, I didn't receive confirmation when it finished but I did watch it finish that time. I guess I'm just paranoid that someone will be able to get something off of it because I used it for so many years and have so many passwords. So, my question is..is there anything else I should do prior to shipping it off or am I in the clear even if it falls into the wrong hands on ebay?
How can I roll back to 10.5 without having to do a clean install? I ask because SL is truly an "under the hood" update, and until developers take advantage of the improvements, we won't see significant performance improvements. As of right now, plenty of stuff is broken. Cyberduck FTP doesn't work for me. Logitech Control center for my external keyboard/mouse doesn't work. And NTFS-3G is broken because it consumes 30% of CPU unless I eject all NFTS partitions, including the bootcamp partition. I thought I would be fine, I don't have any hacks/customization on my MBP, but those important tools don't work for me yet, so I want to wait a few weeks before I use SL.
I have new macbook pro 13" with ivy bridge released on 6/11/2012. I want to install new ssd in it. I figured out hardware procedure how to put os on new hd.
How do i install os on new clean HD once swapped?
MBP didn't come with installation disc, also i don't have external drive to backup restore.
Is there any way to install os with new hd without using backup? if no, any way i can burn installation disc.
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
I am not very experienced in this so forgive me. I have a 13 in MBP mid 2010. I am selling it because I purchased a MBA. I reinstalled(reformat) the OS from Disk 1. Now do I have to use the applications disk to install all the applications or are they already there from the reinstall?
I have a Windows PC with Vista and I am trying to install Vista on the MBA through Remote Disc. I booted from the Leopard Disc 1 and deleted the partitions and also chose MBR (for windows) in the advanced options while doing so. But I am unable to boot from the Vista CD thru the Wifi Network. On reboot (while holding Atl) it only recognizes the Mac OS CD, when in the drive shared drive of the PC.
I just want a clean vista install with no Mac. It was too much for me to start learning now.
I need to do a clean install and don't have a superdrive. I could pick one up but I'm not sure I'll need it much outside of getting up and running with a fresh OS.
What's the next best alternative to avoid dropping the $100 on the drive?
I want to do a clean install on my macbook pro with snow leopard, and already have all of my applications and files backed up. But I was wondering, If I restore the apps onto the newly wiped hard drive, will I have to reactivate them? Like with final cut, will I need to re-enter the serial number for it to work? or will it run just like it used to?
