I have a new 15" MBP(256mb) and was wondering what kind of improvements I can see with doing this. Also can anyone recommend or not recommend doing this for some reason? Does anyone have a link to a good how-to on doing this?
View 1 Replies
I was thinking of overclocking the CPU from 2.4 ghz to either 2.53 ghz or 2.66 ghz, to make it comparable in performance to the higher end models. I know for desktops it's very silly to buy the higher end cpu, because a little overclocking will give the exact same performance. Anyone knows if the same holds true for laptop CPU. ( I think the i5 2.4 ghz and 2.53 are identical except in clock speed, so a little overclock to 2.53 ghz should atleast be possible right? ) And are there guides on how to overclock on a Mac/OS X?
View 9 Replies View RelatedCan it be done? Haven't seen anything leading me to believe so but I thought I might try.
View 6 Replies View RelatedI spoke with a technician at Applecare a few days ago about my wife's macbookpro 15" (about 4-years old) it is continually running very hot and I am concerned that it will fall over. The tech said that she might be 'overclocking' - what does this mean and can it be cured?
View 3 Replies View RelatedIs the processor overclockable, and is the memory upgradeable to 6 or 8Gb
Info:
MacBook Air
I'm running my MBP under Windows 7 64bit, and I was wondering how to go about overclocking the GPU/CPU under the Windows environment.I have a 13" so I'm guessing doing the GPU might be pointless but all the same is there a way to do it?
View 1 Replies View RelatedWanted to let you know that I had great sucess overclocking the 320m in the Air. I used the same procedure found in this thread.
[URL]
This might help you starcraft junkies out there as it may give a 20% increase in performance. I played MW2 for two solid hours tonight without lockups at 625 / 1340. (11" 1.6 4GB) Thanks go to all in the refrenced thread that contributed to these findings!
I would first like to start off with the disclaimer that I am not good at writing guides and I am also not a pro with overclocking but here is my attempt at both. Also I am not liable for damages to your computer and ask fobis has mentioned each gpu even if they are the same may overclock better or worse then the next. So take my overclocking numbers for what they are worth. Experiment and try it out on your own.
Note: This guide assumes your running Windows 7 64bit, and also it assumes that you are new to overclocking.
-------------------------------GUIDE------------------------------
1.First make sure you have a copy of windows installed through bootcamp.
2.Then go ahead and install the drivers that came with bootcamp ( we won't be using the gpu drivers but the rest are going to be useful anyway so might as well go ahead and install them )
3.After you have all that you will want to go here to get a modified driver. This will give you better performance then the bad drivers that apple supplies it will also let you overclock the gpu
4.After you have downloaded both the driver and the INF file open up the driver and it will extract the files to the directory that you choose. It will also try to launch the install but it will fail saying something like " no compatible hardware found " ignore this for now.
5.Now take the INF file and copy it to the folder that the driver was extracted too. It will ask you if you want to overwrite the file just say yes.
6.Now open up the device manager by right clicking on my computer, selecting properties, this should open a new window and on the left there should be something that says device manager.
7.Under the tab that says "display adapters" select the only device that shows up on that tab. Right click it and choose uninstall.
8.After you have done that it will likely mess up your resolution and set it too 800x600 don't worry this is normal. Now just restart your computer.
9.Once you have restarted when it starts back up it will say new hardware found. Now you have to choose to install it manually choose the option that says something along the lines of " search for drivers in specified area "
10.Now it will take you to a new page and on that page there should be an option that says "have disk" choose this and select the directory that you extracted the driver too earlier in this guide. It should find one of the files that it can use and install it just fine.
11.You will need to restart again once this is done but when you start back up your resolution should be fixed if not just right click and hit screen resolution and just change it back to the native resolution.
12. Download Nvidia system tools found here
13. Go ahead and install this it should be self explanatory.
14. Once it is installed open the program and go to the performance tab on the left. ( It might ask you to agree to some terms of use )
15. Just put in these numbers and hit apply
646 for the first one
864 for the second one
and 1314 for the third one
Now your done if your paranoid like me of overheating your computer you can also optionally download and install LubbosFanControl to max out your fans to keep it as cool as possible.
Enjoy your faster GPU!.
----------------------BENCHMARKS-----------------------------
Before OC:
Furmark
Points:912
FPS: min=13 max=22 avg=15
Crysis: 24.89
Unigine Sanctuary Demo (run with everything on defuilt excapt resolution turned down to 1280x800 )
DX10:24.9fps (score:1057)
OpenGL: 23.2 (score:982)
Unigine Tropics Demo: (run with everything on defuilt excapt resolution turned down to 1280x800 )
DX10:18fps (scores 452)
OpenGL:16.3 (scores 410)
Unigine Heaven Demo:
DX10:14.8fps (scores 372)
OpenGL:12.6fps (scores 317)
3DMark06:5975
3DMark Vantage: P2294
After OC:
Furmark
Points: 1081
FPS: min=16 max=26 avg=18
Crysis: 33fps
Unigine Sanctuary Demo (run with everything on defuilt excapt resolution turned down to 1280x800 )
DX10: 31.2fps (scores: 1322)
OpenGL: 28fps (scores: 1211)
Unigine Tropics Demo: (run with everything on defuilt excapt resolution turned down to 1280x800 )
DX10: 21.7fps (scores: 546)
OpenGL:19.8 (scores:498)
Unigine Heaven Demo:
DX10:15.7(scores:395)
OpenGL: 16.2(scores:408) WTF? OpenGL wins? lol
3DMark06:6994
3DMark Vantage: 2922
Notes: Crysis was run at 1280x800 everything on medium excapt physics on very high
Another note: The highest GPU temp underload from Crysis got up to about 78C after about 15mins of running the game. Furmark got the temp up to 80C though after about 15mins also.
I have also played TF2 at max settings @ 1920x1200 for over 2 hours to test stability and it ran fine without any hiccups
Also I feel that this card can be pushed further then this ( I have not tried ) but from what I see it cools a lot better then I expected from a laptop I come from a world of desktop overclocking.
just got my air 11.6 cheapest version. I was playing tf2 under Os X and the performance is just a tiny bit too low for good playing, i feel like a tiny overclock of the 1.4 ghz cpu would greatly help. Considering the core 2 duo is a very mature cpu, and that the laptop doesnt seem to heat that much, it might just work. Of course Im talking about even just a lil oc to 1.6ghz.
View 2 Replies View RelatedAnyone here that's been gaming on their Boot Camp XP partition will already be well aware that Apple cuts the bollocks right off their graphics archiectecture on the Mac side, but there are many ways to overclock those cards from Windows, resulting in sometimes massive performance increases in games/3D apps. I know it's possible on the X1600 cards in the iMac and MacBook Pro; every time I was going to run a 3D game less than a year old, I'd crank the card up from 300/350 to 450/450. The jump in performance in games like Half Life 2 was just immense, going from acceptable but a little shuddery to butter meltingly smooth.
Anyway, I have a MacBook now, and I know Apple restricts the amount of RAM available to the GMA 950 a HELL of a lot, resulting in shockingly, and unnecessary, poor performance in 3D, games in particular. So I was wondering if there was an ATItool app out there I could use to "overclock" or assign bags more RAM to the GMA 950 on my MacBook, on the Windows side, safely and effectively.
I downloaded Catalyst Control Center and the latest XP Pro drivers for the 2600XT from ATI's site. In XP I installed the new drivers and ran CCC's built-in overclocking utility which tests the card and makes recommendations for boosting the speeds. The program recommended increasing the clock/memory from 700/800 to 760/860.
View 3 Replies View RelatedI figured that i'd OC the i3 3.2ghz up to about 3.6 and save the money, since I hear they are the same chips with different multipliers
View 3 Replies View RelatedI recently bought a PowerMac G4 1.42GHz Dual Processor. It has 2 gigs of RAM on it. It was a fair deal I think. The "thing" is still looking like new and shiny. Even the insides are still tidy and intact. My question is, would I still be able to pump more juice from this beast. It still run fast comparable to some decent windoze box. Up to how much processor can i be able to squeeze out the CPU and if possible, how to?
View 12 Replies View RelatedI found this website to overclock the Pismo: [URL] I was wondering if anyone out in mac land had any experence with this?
View 2 Replies View RelatedIt seems that everytime I visit a tech site like anandtech and stumble on CPU articles or discussions, they talk about overclocking. On the latest i3 CPU, the author overclocked the 2.93GHz to a stable 4GHz wihtout even needing additional cooling. Why is overclocking such a big deal on the PC side, but not on the Mac side even though we're using the same family of chips?
View 24 Replies View RelatedI've done some research on how to do this but I can't find the jumpers like it says in the webpages I've browsed
View 6 Replies View RelatedI know in the PC world computers can be overclocked to achieve higher performance. Can this be done in a Mac?
View 24 Replies View Relatedif one were to install a xeon with a 1066fsb, would the macpro automatically try to run it at 1333 (in effect overclocking it) or would it automatically shift to 1066? If it doesn't do it automatically, could you force it to do 1333 somehow?
View 24 Replies View RelatedQuestion to the mac gods...
Recently purchased a new desktop so i wouldn't mind tinkering with my OLD iMac G4 1.25G Is this processor just a over clocked 1g G4? I would like to add more ram and over clock it to 1.5g or higher if possible. Is there anyone who would know how todo this? I assume i would need to change jumper setting within the computer right? What would the setting be?
I mainly use this for music and simple everyday tasks and its soooooo slow compared to my MBP and MP.
I was wondering if there are any way of overclocking nVidia 9400m on Windows XP. Does anybody have a clue of overclocking it?
View 7 Replies View Relatedi have 1.25ghz mdd default jumper settings is like first table now i have jumpers like third table. about this machine shows 1.58ghz now and its unstable so how i get this f..king 1417mhz
View 6 Replies View RelatedI followed the instructions here: [URL]. To do the BSEL mod. My (previously 2.0 GHz) MP booted up after brain transplant - hooray. Eight-core rendering in Cheetah, no problem. However the chips seem to be running at 1.86/1066 (According to Marcel Bresink's Hardware Monitor). If I somehow got the procedure wrong (wrong pin covered, say), should the chips be running at all? If I got the procedure right (correct pin covered) then what are the possible explanations for it not working?
View 24 Replies View RelatedI have a 1.33ghz 1.28gb ram 14" ibook. I have leopard on it and have optimized it as much as possible. Ive got youtube videos running pretty smoothly but there in an online TV service I use that drops a frame every couple of seconds. I was wondering if i overclocked the graphics card by 10% will in slightly improve the playback of flash?
View 6 Replies View RelatedI just restored an old 1999 G3 iMac DV 400MHZ with slot-drive from the dead, and I feel it lacks a bit of power under it's hood. I already put RAM and HDD but the computing power is just not enough. What I want to do is go into OpenFirmware and speed up the cpu and possibly the bus, I remember doing so on my sawtooth but I can't find the code plus that was a G4 and now I have a G3. I also found this page [URL] that shows how to mechanicaly overclock up to 1GHZ but I want to be able to do it non physical if possible. I know this isn't the hot topic now a days but maybe some of you will remember what they used to do and feel some nostalgia(is that a propper word?).
View 2 Replies View RelatedSo last December my laptop got smashed and everything works except for the backlit screen. In fact I can still use this laptop it is just extremely hard since the screen does not light up. The person that smashed it ended up buying me a new laptop so I have this beat up (and I mean the shell is destroyed) laptop with quite a lot of functioning parts.
Now a few weeks ago my girlfriends Grandad spilled a beer on his brand new 2010 Macbook. The logic board is shot so it is almost cheaper for him to buy a brand new laptop.
Would it be possible for me to take the logic board out of my 2008 Black Macbook and put it into his 2010 White Macbook?
By far the most interesting benchmark trend coming out of the latest Macbook Air tests is that of the 320M GPU - is this thing somehow clocked differently than in the Macbook/Macbook Pro?
From:
[URL]
The latest Macbook Pro 13" 2.4 Ghz gets 33 FPS in Call of Duty 4, whereas the Macbook Air 13" (using the same 320M GPU) gets 40 FPS. Even the 1.4Ghz 11" gets 37! So obviously we're not talking about a CPU limited game - the only explanation then is that the GPU in the Macbook Air is clocked differently than in the 13" Macbook Pro, no?
From:
[URL]
Again the Macbook Air clocked at 2.13 ghz is beating the 2.4 Ghz Macbook Pro in World of Warcraft and Portal! And in WOW the 11" 1.4ghz still manages to beat the 2.4 Ghz 13" Macbook Pro.
Anyone have any additional insight into this? Anand did a terrible job of testing these for gaming performance, unfortunately, so he may not have even noticed this trend.
Is the white one the same size as the 13" aluminum that now went pro?Pretty much, I want to know if I buy a case for the original 13" Metal uMB from InCase, will it fit on this plastic one? They don't have blue for this, but they have blue for the original aluminum one.
View 3 Replies View RelatedI have a 2008 13" white, plastic MacBook. Its a bit slow, but adequate. Thinking of selling it and paying the difference to get the 11" MacBook Air. I've heard it is similar in speed and has the same processor.
The main problem I have with my current MacBook is that its heavy - I need something lightweight to easily carry to school and class for note-taking and such.
How is the Air better or worse, and would I be losing anything significantly by replacing the 08 plastic MB with a MBA?
macbook '08 specs: [URL]
I just upgraded my daughter from last year's MacBook to a new 2009 MacBook Pro (my mother will get her old one) by cloning the drive using SuperDuper. Everything works fine except it doesn't detect the audio hardware in the OS. I see that the new macbook pro has different audio hardware according to system profiler. Is there a way to copy the driver off the install DVD or should I just go ahead and reinstall everything.
View 2 Replies View RelatedHave searched on Mroogle but couldnt find what i was looking for.
I have my Blackbook connected to my tv via mini dvi to dvi then to hdmi, but i also have another laptop which is the old style Macbook Pro.
I was looking for a piece of software that would let me use the other laptop which isnt connected to the tv as a wireless keyboard and mouse?
Anyone ever tried this before? Any ideas?
