MacBook Pro :: Hard Freeze And Screen Blinking On Late 2008
Feb 12, 2012
I have the infamous bugged model, the Late 2008 Macbook Pro. Famous for its screen flickering on the 9400M Nvidia graphics card.
I am currently using the 9600GT Nvidia card, and have some across a few... problems. First of which: Hard Freezing. I know this will happen occasionally, but I had to shut down my computer 3 times in 4 days because of a hard freeze. 2 of the times, the hard freeze was accompanied by my screen just going absolutely CRAZY.
Here is a slight example of what it's doing, but it's not exact (since both times it did something different):
[URL]
Both times, before the hard freeze and flickering, my iStat Pro told me my CPU temp was between 99 degrees Fahrenheit and 103 degrees Fahrenheit. I am wondering if these low temperatures could have ANYTHING to do with the freezing. This problem has just cropped up recently, and I have never had such low temperatures on my mac. I have Fan Control installed because my fans on my laptop weren't cooling off my laptop well enough... the 9600M GT card runs really hot.
Info:
MacBook Pro (Late 2008) 15 inch/2.53 GHz, Mac OS X (10.6.6)
I'm a annoying issue with itunes. When watching podcast or videos. Every now and then there will be a 2-3 second freeze of video and audio. I've been having this issue since i bought the MBP. Has anyone seen this issue?
Specs:
I have a Macbook Pro Late 2008 Pro:2.53 GHz Ram:4 GB Serial:W88416BH1GA
The words on webpages jumble up on top of each other and pictures are chopped up. I literally have to take my track pad and scroll up and down vigorously for several seconds and literally shake everything back into place.
I have all the data double-backed up so I'm not worried about that, but assuming I have to replace it what can I get? I'd heard that you can put any 2.5" SATA drive into a late 2008 15" mac-book pro, but occasionally I see consumer reviews saying things like "only compatible with 2009 mac-book pros onwards" or "not compatible with lion".
i was using my (late 2008) macbook 2.0Ghz when i noticed a vertical Blue Line going across the screen from the top to the bottom. I have uploaded pictures for you guys to see below.MY APPLECARE HAS ENDED!Can someone explain if this is something wrong with the LCD screen itself or the video card or the connector is loose?And if its a software or hardware problem, how to solve it by software? i have quoted asolution. But can someone verify if it works?
i just ordered a late 2008 macbook pro 15 with the dual GPUs (9400m and 9600m GT) and I'm a little worried about the battery life.
-What can I expect if just doing normal every day stuff (web surfing mostly?)
-does watching a movie off of the hard disk use less battery than watching it off a DVD? Is there a big difference?
I'm not a big gamer but would like to have the horsepower to play a game should one come out that I want. I'm also not a big traveler so battery times are only of average importance.
Basically, I'm asking if I made a good purchase considering I have only average concerns for both battery and game performance. They had the new 7 hour battery 15" macbook pro for the same price but it doesn't have the dual GPUs.
Has anyone else with a new MacBook Pro with Retina display notice a slight uneven yellow tint to their screen? On my screen it appears starting about midway down the screen and is more noticable on the left hand side. It is very faint, but enough to make me notice it when scrolling through webpages and the such. I am wondering if maybe this is the same glue drying issue with the iPhones that just came off the production line?
Also, when trying to run WebGL content in Safari (haven't tried it in a different browser yet), my MBP completely hard freezes and requires a power cycle to get it running again.
Info: MacBook Pro with Retina display, Mac OS X (10.7.4)
Is there really a "Late 2008" model? If so, what is the difference.I ask because I recently got a MacPro and according to Apple's hardware test, it is an Early 2008.
I've currently got a macbook pro which currently has 4Gb ram and I want to know if it can be upgraded to 8Gb. [URL] Mode A1621, Boot Rom MB41.00C1.B03 I've read a number of postings which indicate 4GB is the official supported amount by Apple, 6Gb will work (unofficially) and this posting [URL] indicates some late 2008s can be upgraded to 8gb after a EFI update.. however mine comes up as a MacBook pro 4,1 not 5.1 (shame).
- Am I on the latest EFI/Boot Rom? Can I simply install the latest and it will
- Can this machine with the latest boot rom/snow lepoard run to 8Gb ram?
I had always read that the max. ram I could install on the Macbook 13inch late 2008 model, model 5,1, 2.4 Ghz, boot rom version MB51.007D.803, SMC Version 1.32f8, was 4GB of ram. I received an add from "Other World Computing" stating that I can install 8Gb to this model. I am running Lion and do a lot of photography so the idea of increasing ram is interesting. However, I don't want to waste my money.
MacBook Pro started giving me terrible glitches, Where 1) Applications will quit unexpectedly and 2) I will get the gray cover over the screen with text saying I need to restart my computer.
This is happening quite often and I would really like it to stop..
I noticed it all started happening after I installed ProTools LE.
I've already erased my internal hard drive and reinstalled snow leopard, then put my necessary files back.
I have also upgraded my RAM and HDD, about 3 months ago and it's been working flawless until I installed ProTools LE.
I am about to upgrade my late 2008 aluminum MacBook 2.4 Ghz to 6GB of ram from owc but wanted to know if the will support 8GB, running at full stability. From what I can tell from other threads is that the owc 8GB kit doesn't work is this correct? If it can handle 8GB of ram I will do that instead of 6GB.
I'm thinking about upgrading to a SSD but wanted to know if my MacBook (see sig) had a Serial ATA speed of 3 Gigabit or 1.5. The System Profiler says : Vendor:NVidia Product:MCP79 AHCI Link Speed:3 Gigabit Negotiated Link Speed:1.5 Gigabit Description:AHCI Version 1.20 Supported
under Serial-ATA. So I'm not sure if that means the the port is a 3 Gigabit port but the HD is only 1.5. Does that mean the SATA cable is a 1.5 Gigabit speed, and I'd need a new cable, or what? Also if it is 3 Gigabit port that means it's SATA II, right?
My macbook display is just too small for watching movies at my girl's pad, so I was wondering if I can connect the macbook to her Toshiba TV (non-flat pannel/HD)? What adaptor or connector do I need?
Ok, so I just received my early Xmas present(s) from my work... (Got a whole bunch of Mac goodies).
On to my question, I have my 24" ACD sitting in my office, and my 2008 Macbook, I want to know if there is a way to connect the ACD to the Macbook. It's not the most important thing in the world, because I'm getting my 17" MBP in Oct., but until then, I would like to use the ACD with my Macbook if possible.
Looking to buy a bigger hard drive for my MBP 15" base model (Late 2008) and was wondering what the max is for that particular model? I currently have a 250GB and am running low on space and needing to upgrade. Also if you have any info on the specific specs i need from a HD that would be awesome.
The cursor stops responding for up to minute (without changing to a "beach ball"), lots of "beach balls", delays in typing/deleting, even delays when using arrows. Restarting helped (though it didn't shut down properly), but the problem is back. I'm on 10.7.3, using Safari, but the problem is across apps. I have very little else open at the same time.
Info: MacBook Pro (+7 previous Macs), Mac OS X (10.7.2)
My gf's late 2008 MacBook ist annoyingly slow. I have 8 tabs open in Safari and when going back and forth between those tabs it gives me the spinning beachball for like 30 seconds. Sometimes it even reloads the whole tab which takes even more time. The whole time I hear the hdd working hard, it's clicking all the time though there are no unsual sounds that would indicate harddrive failure.
I checked disk utility it says S.M.A.R.T. is verified. I even used another program (don't remember the name right now) to get a more detailed description of the hdd status, progam says everything's fine. I checked the memory both with the tools provided by Apple and memtest, both say everything is great. So I asked some Apple Service person what the problem might be, he said if SMART's okay than it's probably the hdd-cable - repair would cost me (or my girlfriend in this case) 60 bucks. Before I shell out the cash I want to double check and see if I can repair the computer myself. My plan is to connect the hdd via usb to see if it's still that slow, but of course the speed of usb itself is limited, so I'm not sure if this is a good idea.
I've an early 2008 macbook Pro with geforce 8600 graphic cards.Since a few days i've problems with it, during a session my screen become a little green and pink and I've sometime the kernel panic message.When i restart, i've green and black bars on the screen, the apple is not in the middle and the mac freeze.I can't start with the recovery, even on the usb recovery disk, because after the choice of the recovery, the mac begin and freeze.I've ever try to begin in single user mode with fsck -fy command, sometime it resolve the problem but now nothing at all.
Long story short, I've got dust and maybe even a bubble inside the glass of my Late 08 MBP. Is it possible for techs to just remove the glass to clean/check the screen without damaging anything or will I end up needing to get the display replaced?
I sent in my macbook pro 15" about 2 weeks ago to have its logic board replaced because of screen flickering. A couple days after I got it back, it started giving me 3 beeps on startup. I finally was able to get it started somehow and its been running fine untill today. It started giving me the 3 beeps again. I know this means there is something wrong with the ram. I opened it up and switch the RAM and it started. I went away for a couple minutes and when I came back there was a message saying that I had to shut it down holding the power button. When I tried booting it back up again, the beeps came back.
I have a late 2008 MacBook Pro running Snow Leopard. and lately whenever i been running on battery, the computer has been randomly powering off. as it it losing all power, but it doesn't seem to matter what level the battery is at. but once i plug the AC adapter it, i do not have any kind of problem. i guess it could just be a dead battery.
Does the late 2008 unibody Macbook pro have Sata II or III?I have an Apple branded 256GB SSD and It isnt booting up as fast as I think it could be. I am wondering if my logic board supports sata III because I think the SSD could be Sata II.
Info: MacBook Pro, Mac OS X (10.7.3), SSD 256 GB with 8GB of RAM
This has been a problem with my macbook for some time now, but It's never been enough to get in the way. Lately it's getting even worse.
When playing games, or doing anything remotely graphical (has happened while using iTunes visualizer), my macbook can just freeze. Very rarely I get the kernal panic grey window, but most of the time it just hangs, repeating the last half a second of audio. Using VMware (not playing games, just windows programs) can also freeze it.
I have the 2.3GhZ Model, while my friend has the 2.0GhZ model, and he does not have a problem. I don't think his has ever frozen. Yesterday mine froze twice within an hour, while his just happy kept running.
I've googled this problem and I can't find anything. I want to see if you forumers know something before I call Apple Support as I'd rather know whats going on before that.
I have:
2.33GhZ, 2GB RAM, NVidia 9400M, 250GB Hard Drive (Happened when it was barely full, and close to full). I'm running OSX Leopard 10.5.7, but this has happened on all version since I bought it (10.5.5)
alright so everything with my late 2008 macbook pro had been fine up until about three weeks ago when it started to randomly crash (while watching movies online and using vuze). so tonight i decided to reset the PRAM since i had seen that as a possible solution on some of the other threads on this issue. did that but now the front power LED doesn't come on when the computer is on. so far no crashes yet but who knows
