MacBook Pro :: Apple Hardware Tool - Missing Original Disk
Jun 20, 2012
I have a mid-2010 MacBook Pro 15" with extra-dense pixels, but have lost my original disks. Is there any way to get hold of the AHT for this model? It original shipped with Snow Leopard but I have upgraded it to Lion. Since this is a hardware test I am running though, I assume that the AHT is tied to my hardware model rather than the Mac OS. I did try restarting and holding down 'D' both with no internet connection and with an internet connection - just in case - but got no joy.
Info:
MacBook Pro, Mac OS X (10.6.4), Plus MacMini, iPhone, iPod Touch and regular MacBook
I've just received a used 12" PowerBook which is in superb condition except for the feet. The original little Apple feet are missing, and the previous user has stuck large, flat, rubber feet on the bottom. I think they are the self-adhesive sort as they have slipped a little, leaving little outlines of residue on the base. The feet themselves seem fairly secure, but they are big, ugly, and slightly uneven so the case rocks very slightly. Does anybody have any advice on how to remove stuff stuck to a PowerBook case and how to clean it up? I might just buy proper Apple replacement feet (I know they are pricey), but the residue on the bottom case annoys me. How could anyone stick something on such a beautiful machine?
i've been using Logic Express 9 for a few months now and started today messing about with the included demo project "The Numbers Game".Unfortunately, I accidentally hit save on a change and now have fundamentally affected the demo.
If I do a re-install of Logic Express 9 will this wipe out or affect my other projects in any way? I really don't want to lose any of the work I've done so far, but would really like to have back the original demo project as a learning tool.
I scroll through my incoming mail and find a message I want to reply to or forward. I move my cursor to the body of the message and swipe up and down to try to make the mini tool bar (trash reply reply all forward) appear within the message.Sometimes it does and sometimes it doesn't. I've tried clicking on the message and it doesn't seem to make a difference.
I've always backed up the DVDs I've purchased for when the originals get scratched. On a PC I had a decent workflow that involved a decrypter, a compressor, and Roxio burning ROM. Now on a Mac I'm a bit lost. I've used handbrake to rip DVDs to be playable in iTunes and have Burn installed, but there seems to be something missing, namely a compression tool and the ability to keep the original DVDs menu structure, etc. I know about Mactheripper but am lost after that. Shed some light on this for me?
I did some searches in google as well as this forum and it looks like there are quite a few options out there for users interested having a program automatically grab missing album artwork from places like amazon if you are running iTunes on Windows.
Users have also reported that some of these tools are great at screwing up the existing album artwork in your iTunes library.
I am looking for a batch tool since I have missing artwork on 1000s of songs (note that this album artwork is not present in itunes store). Does anyone know of a good, reliable program or script that can import missing album artwork on iTunes 8 in OS X 10.5?
I think that someone else can read my emails from my mac computer.There are some informations outside which can only come from my emails. Is there a apple tool to check for trojan, virus or other software. I think someone installed the eblaster software on my mac as i was away.
Info: MacBook Air (11-INCH, MID 2011), Mac OS X (10.7.4)
I've installed an ssd in my 2010 MBP and now need to install OS X 10.6 from original installation disk (my hd was accidentally wiped and I've only a limited back-up). Mac has started fine and I've DU open, but am now a bit lost. get the ssd and OS up and running?
My original hdd refuses to boot up, and using disk utility via recovery mode to try and fix it just gives me an error "disk utility stopped repairing the drive, salvage data and format etc." giving an error about invalid node structure or something. Tried using target disk mode with a friend's mac when I was at work but the drive didn't even want to mount. Assuming it's about to die, I have just bought a new hdd (XT Hybrid) and since my mac is pre-Lion era (2010 model) I don't have a built in recovery mode, but strangely enough hooking up my old hdd with a dock and option-booting to it I can still access the recovery HD partition on it.Â
So I was thinking if i can essentially "clone" my original hdd to the new one using the restore tab on disk utility, and try using disk repair on it to get it working? or is there another app I can use that will do this (being mindful that I don't have access to another mac or the OS on the HDD to run it, so it'll have to be "live", and preferably free) Or should I just cut my losses and just put a fresh install on it... Yes I do have a time machine backup, but there's two reasons I want to see if this works - one is that although time machine is quite up to date (within a week I'm guessing, can't remember), it's obviously won't have the new content created during the day(s) before I was able to plug in my external hdd, and secondly since I don't have access to another mac to create a lion install usb drive, I'll have to use the internet recovery, and knowing my internet connection, 4gb download would take probably overnight and nearly a whole day to finish (assuming it doesn't drop out).Â
Is the new asymmetrical fans in the Retina MBP an original design by Apple? I don't see cooling fan companies like Scythe having that design. If so, that's a great innovation to decrease fan noise significantly.
I can use Carbon Copy or Superduper to clone OS X disks but having not used them will either of these programs allow me to clone from my new 13 MBP with 500GB HDD to 256 GB SSD i.e. Compress the original disk volume like Acronis True Images on Windows?
last week my mac (1 year old iMc, 2.4ghz intel chip, 4gb ram, system 10.5.7) went all funny, everything was working slowly - so I restarted, same thing, I restarted again and it just went to the grey screen with the spinning ball.Ok so I restarted from my tiger disk and it could see the drive, so I tried to install a new system and it got right to the end of the installation then said because of a disk error it couldn't do it.
Ok so I bought an external HD, put a system on and started up from there - now the drive came up, but things were slow still, it took forever to copy anything so I tried disk utility, it couldn't repair it. I tried drive genius, same thing. DiskWarrior 4.1.1 same thing.
Now I tried again a few times and the programmes took forever to start up but now disk utility opens after about 30 mins and can see the drive, but it's lost it's name and I can't even repair or repair disk permisssions. Drive Genius can see it but not repair and same for Disk Warrior, the 'rebuild' tool is greyed out.
It's a 500GB drive and only has 3GB spare on it, it has loads and loasds of stuff on there, work, music, films, all my preferences, passwords and of course all my software - I do have a backup of some stuff, my photos luckily enough - but I still need to get it fixed.
Now what can I do? Is there anything in terminal I can do? Any other ideas anyone? I'm desperate for help.I have downloaded Data Rescue II and it has been gathering device information for an hour, I'm hoping it will carry on and later on I can start recovering. But in all honestly is there anyway of fixing the drive?And if not can I recover and then do I need to re-format? And if so will it work ok once formatted?Also any ideas why this would have happened?
I'm running out of hard disk space on my MacBook pro running OS X Lion. I have a 500 GB hard drive and at the moment the finder says I only have 16 GB available. Checking the total of all my files with the finder as well as Apps such as WhatSize and Disk Inventory X only adds up to aproximately 420 GB of files. Therefore I should have about 80 GB free so I am missing 64 GB of hard disk space.
The problem is not the local backup storage as I have had this problem before and have turned off local backups. I have also run disk utility and shut down and re-started. The available disk space is not decreasing with time either like other people have experienced, its fixed at the current availabilty of 16 GB free, and adjust normally as I add and remove files. So there really is a hidden file or something that is using around 64 GB of space.
I noted that a previous post with a similar problem said that DiskTools pro had fixed the problem. However as this application is reltively expensive and there is no explanation of how it soved the problem I don't want to pay for it without some guarantee of results.
I've looked at some other posts that have gone over how to move files to an external drive, and they all say to use command while moving. I understand this copies the file and deletes the original, but when you make a copy and delete the original, you lose some of the original data, such as creation date, etc... This makes storage and organization more complicated than it has to be.
I have recently added an SSD drive to my system and cloned the original main drive. As I make use of bootcamp deleted the bootcamp partition from the original drive and plan to use it just as a data disk (it already has my data on it). Disk A:Mac OSWindows 7 (in bootcamp)Disk B:Mac Data diskThe trouble is I am now being presented with 3 disk options on start-up as both the SSD and the original disk OS X instances are showing (as well as the Windows). How do I stop the original disk being bootable? I have taken a look at fdisk and diskutil which both show that the original disk has the bootable flag set - but I have no idea how to remove the setting.
Does a mac come preinstalled with any software that is 'first time' only, and is not included on the install DVDs? I am expecting a mini shortly, and don't know whether to upgrade the HDD straight away, or clone the original disk. I'd rather do a new install.
I have a MacBook with MacOS 10.5.5. I purchased Snow Leopard and want to install it, but I forgot my master password. I know what the password is supposed to be, but it doesn't work when I type it in.
I cannot find my original MacOS 10.5 disk to re-do the password.
I came from the MS Windows PC. I love everything about the Macbook Air and the Apple OS; however, I get used to the Delete, End, and Home buttons. Is there a way on the Apple keyboard that I can simulate these functions? With these buttons, I can easily move to the end or start of a sentence for word process editing. I can delete from the right side of the sentence instead of using the arrow on the Apple keyboard to move it to the right and then use the Delete (which is really a Backspace key) to delete the word.
I've tried to install the network drivers via the original disk that came with my computer, the bootcamp 2.1 disks, and even the HP Broadcom drivers, where none of them worked, does anyone have any ideas on how to solve this problem, Ethernet works perfectly btw.
Mac OSX 10.6.8> I moved my swap files or "Disk" to another drive> problems>can I restore the swap files/disk its original location?Is there a method maybe through 'Terminal'?   Â
MacPro 1,1 July 2006 2 Core2Duo Xeons, 12GB RAM, X1900 Radeon HD (500MB VRAM)
I have university work I need to complete tomorrow. Machine is a 13" MacBook Pro with Bootcamp and windows 7 installed but the problem is on the Mac partition sequence of events:-I was using MS Word for Mac when it crashed as being unable to write to the disk.I went to utilities and ran a verify permissions - failures were found - one marked as not repairable I ran repair permissions - it repaired all but one I ran verify disk - it said it there was an error which could not be repaired - reformat the drive a restore from backup I have full time machine backup so thought no problem I shut down the machine and restarted using Cmd R and went to disk utilities - no "format disk" option.Browse on internet finds I have to delete the "Macintosh HD" partition - re- create it and restore - ok Find I cannot delete the partition because it cannot unmount the drive - because I have booted from the recovery partition which is on that drive - catch 22 Try to boot from original Snow Leopard disk - LION wont let you do it Read some more on Internet and find I can boot from the Lion Revovery HD on a USB Only way of getting it is to download it or create it using the machine I want to recover - but that machine won't boot in OS X ?...Tried the Lion Internet install but it simply fails with an " error occurred please try again.how I can get a recovery USB written in order to externally boot my Mac and recover it ?
I have available:-
Wifi USB drives Time machine backup on external USB drive IPad windows available on the MacBook
I have a 2008 iMac running Lion 10.7.2. I am trying to reset my Admin P/W,( I do not remember setting one up in the first place, but trying to use Terminal recently to do Maintenance scripts, it asked for one, which I cannot oblige it with). (I only put in a Master P/W). Â
The method I have been reading requires using the original software disk supplied with the Mac. My iMac came with Leopard, whch I upgraded to Snow Leopard and now to Lion.Â
Will the original Leopard disk be suitable for the above? or do I require the Lion recovery or whatever to do this task.Â
I am trying to reinstall lion on my 2012 13' Macbook Pro, but when I press the option key I do not see the option for Recovery. I recently changed the Hard Drive. Is it only something you can do with the original Hard Drive that came with the computer?
I'm trying to connect a new MyBook Essential 2TB drive to my original 802.11n AirPort Extreme Base Station, and for some reason it keeps telling me there's an issue with the disk, despite being fine in OS X. Was there a limit to how big a disk could be? I have two 1TB MyBooks connected to it now with no issues, not sure why the 2TB drive has problems. Firmware 7.4.2
My hard disk is a Raid system. 4x3TB = total 12TB but 3 TB is for backup. So in effect usage space is 9TB. But now used up 7TB (called it original harddisk) I took my iMac to a shop and it dis some verify and tried to repair the disk using Disk Utility. But it cannot repair. Apparently, he said that my hard disk is okay but it has a directory corrupt problem. That is why now my FCPX cannot read all the data. All my media files for FCPX are stored in this 9TB external hard disk. So, I was told the steps to do are:Â
1)Â copy all these 7TB data from Original hard disk into a new hard disk (called it haddisk B).Â
2) Then reformat the old 9TB hard disk (which we earlier called as original hard disk).Â
3) Then I copy back from hard disk B into Original Harddisk 9TBÂ Question is will FCPX be able to recognise again my media files from the Original hard disk in
Info: 15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
I didn't just lose my harddrive. My 2007 iMac with Leopard froze up yesterday and it looks like I need a new hard-drive.But I thought I'd try to follow the support info to reboot it with the startup disk so that I could try to backup the files.I inserted the disk, pressed C on startup, and worked my way to disk utilities.I clicked on the Macintosh HD on the left side and clicked "repair disk." and after a couple minutes I got an error message saying that the repair failed.Ok, so then I stopped, but then noticed that the "Macintosh HD" on the left side is now in grey color print. And when I click on it, it looks like there is 0 bytes on it.Did I just lose my entire hard-drive?? Please tell me that there is some hope. I was having problems with backing up my info onto my WD Mybook through TimeMachine, so it's been over a year since that was last done. I am merely trying to retrieve files from the last year from my hard-drive before I have a new one installed. I'm dropping off the computer in the morning with an Apple 3rd party consultant to try and retrieve what he can from my hard-drive. I just want to know if I just made things worse.
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
