I have missing pins on minidvi port my macbook. The minidvi port is connected to the logic board. A new logic board is like 500 dollars. The minidvi port has 32 pins I don't know if it is worth the hassle of replacing one. I really don't use it very much but it is nice to have.
View 2 RepliesI currently use an LCD TV to play movies from my Macbook Pro via the MiniDVI - HDMI cable. At the moment I just connect everything up and then use the Mirror Display in the arrangement settings. So my laptop screen is the same as my LCD TV screen. What I want to be able to do though is watch the movie on the LCD TV and also use the laptop to go on the internet, is this possible?
View 4 Replies View RelatedI have a new MacBook Pro (latest model) and I bough a mini display to DVI adaptor that I use to connect an external display. Now, I need to connect a projector (VGA) and I found that I have a DVI To VGA adaptor that I used with my old macbook pro. When I tried to connect the adaptor, surprise! it does not fit! (because it has four extra pins. What happens if I remove those pins? Will it work? or I will have to also buy a mini display port to VGA Adaptor?
View 2 Replies View RelatedIt happened when I was trying to install my right fan. The plug was too big for the connector and the connector just broke right off the logic board. I now see the solder points. They are too small for a normal soldering iron so I can't solder the wires directly on. What are my options now? I hope I won't have to replace the logic board considering it's working perfectly except for this one part.
View 5 Replies View RelatedI am trying to connect a core solo 1.5ghz Intel Mac Mini to a TV. Now the TV is old so the only connection type I can do is either scart or the 'phono' type red white and yellow pins that you have (yellow for video and other two for stereo sound). Is there any type of adaptor available? And if so (because I think there is). How will I know that my mac mini DVT can output to those for a video source? Do I need to know about graphics cards details or anything? Or will anything support it?
View 5 Replies View RelatedIm trying to rebuild a 20inch g5 imac. While replacing the bezel today i removed the screen and broke the pins that connect the connector from the motherboard. Can this be repaired or must I purchase a new screen?
View 1 Replies View RelatedI have an old g3 imac, 500 mhz, 20 gb hd, and for some time i've been planning to make it totally silent. As you know it doesn't have fans and the only noise you can hear from it is from the hd.
I was thinking to do it by changing its 20 gb hd for a ssd. As prices are still quite high (even for small ones), maybe a 16 or 8 gb would do the job...
An other option i've thought of, is using a cf to ide adapter, and a cf card, because a 8 gb ssd is still about 50 or 60 $. For smaller ones, i think it's better to leave it as it is now, because at least i'd like to have some music and some movies in it!
How many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?
View 22 Replies View RelatedI clicked the little jellybean thing on the top right, and it only makes the menubar appear and disappear, but the sidebar is still gone.i don't have a little dot on the left hand side so i have nothing to drag. i checked my finder preferences and the folders are still checked.but even after all that... still no side bar.
View 2 Replies View RelatedI have just ordered a new MacBook Pro and it does not have enough USB ports for my needs.If I have a USB 3.0 hub and I mix USB 2.0 and USB 3.0 peripherals on it, will the whole hub/computer USB 3.0 port be slowed down to USB 2.0 speeds?I am thinking back to Firewire, if you have Firewire 800 and 400 devices on the same chain, the whole chain slowed to Firewire 400 speeds.I don't think this is the same with USB but wanted some reassurance..
Info:
iMac, Mac OS X (10.7), MacBook Air, Mac Mini
I am having issues with my Dual Band 1TB time capsule for some reason the damn ports won't forward I have enabled the correct settings with the ip address and the ports, but when I use a program to test if the ports are open they are always closed, regardless on pc or mac. Does anyone have a solution to this? I even reset my Time capsule to see if it would work, but no luck.
View 1 Replies View RelatedI have seen a few videos about mastering and gave it a try myself. It can be done by clicking the master tab, then going to the Input 1-2 column setting and then clicking setting - mastering, etc.When I first did this a few weeks ago, there were many options such as hip hop mastering, electronic mastering, etc.Now, when I do so, I have different - much less enticing options and have no idea where the good ones went.
Here's the deal, I am so frustrated. I am trying to open port 59152 for Transmission on my Macbook Pro. I have the latest releases of everything, I am using an Airport Extreme base station with an older airport to boost my signal/connect my tivo w/out a wireless adapter.
I have managed to get it open in the past but there was an update or something a month or two ago and at first it was still open and then it closed. I don't know what changed with the update, all I know is that I did n't change anything.
I have granted permission for Transmission to accept incoming connections on the firewall, little snitch allows it too. I have lighthouse, which worked at first but now I don't even know why I bother having it run. I have the port mapped through the airport utility.
PLEASE don't say to go to portforward.com because they haven't updated the Airport section since Leopard came out, yet every search I do someone repeatedly tells the person needing help to go to [URL]
I am going to attach some screen captures so you can see what I've got going on and maybe point out something I've missed.
Relevant newbie to the mac world. I have a MBP late 2009. I bought a third party Mini display port to HDMI converter so I can hook the MBP to my 46" Samsung screen.
This works fine, no major issues here. However the picture is not great. I compared watching a standard definition TV show through the MBP then burnt it onto a DVD. The DVD (using the PS3 as my DVD drive, connected via HDMI) had superior quality than through the MBP.
Also the picture does not quite fill the screen. There is a small black border running all the way around the screen. Does not sound significant but when doing the same comparison as above, you notice the difference when via DVD the movie fills the screen. I have played around with the resolution settings. Those that fill the screen chop bits of the mac desktop off, so thats no good either.
So I am wondering why this is? Is it because the mini display port is not a DVI port, hence I am not getting true HD quality picture? How can I overcome this if at all. I'm thinking of getting a mac mini as a media hub/HTPC but want to ensure I dont encounter the same problems.
Over the last few days I've noticed a problem with missing icons. It seems to mainly effect icons in the Trash but I have one or two missing icons for videos and apps within the Finder and on the Desktop. The icon is completely gone - I have to click on the filename to select it. Quicklook works OK (for video).
I can't think of anything I've installed that would have done it except Onyx, but I haven't run that in weeks. I did repair permissions a few days ago but I doubt that could break this. It persists after a reboot. I can't get it to happen on command, it just randomly occurs. Creating a New Folder always works OK.
is there a adapter with both a usb port and an eternet port?
View 1 Replies View RelatedThis is my first post on the forums, although I'm planning on looking around in here once in a while, to see what people are posting.
For starters, I just wanted to tell you about this little problem I've been having with my MacBook 1,83GHz.
Sitting at my desk at work one morning, peacefully drinking my coffee, I suddenly received a rather discomforting error-message from my shiny new (about 1 month old) MacBook;
"A USB devise is currently drawing too much power and the port will be deactivated.".
For anyone wanting to use their Mini Display port connector on their 4870 with a panel that has the standard size display port connector, I've found a source for a cable that works perfectly. It has the mini display port on one end and a full size display port on the other. Cost $19 bucks shipped and works like a champ. The cable is nice and compact, thinner and more flexible than my DVI cable. I'm quite pleased! ( it's the little things.... )
Here is the cable I picked up: Mini Display Port to Display Port cable
My iMac is I think 2009 model. It comes with a mini-display port.
I have a Dell monitor which has a Display port input and I want to use it as a second monitor. The DVI input in the Dell monitor is taken up.
But how do I connect from the mini-display in the iMac to the Display port in Dell monitor ? Doesn't look like aplle sell this connector cable !
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
Is there an advantage to using Display Port over the DVI port? To use the display port I would have to use the apple converter and plug my DVI cable into that.
View 3 Replies View RelatedI am new bie with Mac! I am trying to install mac port on my mac 10.5.6.
But latest available port that is 1.7.1 is not working on my system. It says it can only be install on 10.5. I dont know what to do.
Actually i am trying to install macport becoz i want to install few software with its help like xfig. Any help from Mac pals will be appreciated.
have you ever found it is hard to plug the usb cable into the usb port without lifting up the air? everytime i want connect my iphone to it, i have to lift it up, which is really annoying.
plus the short battery life and overheat bottom, i ended up returning it back to apple and get a macbook alu instead.
Im totally new to Mac's and have always used Windows based PC's. I work with Cisco kit a lot and often console into them using a serial port on the PC or a USB to Serial adaptor on the laptop. I can then use something like Putty to console to the Cisco kit via the com port assigned to the USB to Seriall adaptor...well Im having trouble getting my USB to Serial adaptor working with my newly purchase MBP (Just had it 2 weeks and still getting to grips with it)
Firstly when I plugged in my USB to Serial adaptor I expected some sort of pop up or activity while the MBP installs it but nothing has come up so maybe this one isnt compatible with the MBP. Secondly Im struggling to find an application that I can use like Putty on the MBP?
I recently got a Macbook and have a iPhone and iPod shuffle. The thing is there isn't enough usb ports on the Macbook so I had to get a hub. The hub I got IS self powered and does not require a external power adapter. My concern is that I am withdrawing too much power from my usb port through this hub. It is a 4 port hub and a External HDD ( has own power supply), Optical mouse is connected to it. also I charge my iPhone and shuffle via the same hub.
I am afraid that there is power limit feature and it will fry my computer. I notice if I boot in boot camp to windows. Windows will display a error message telling me, I am not allowed to have this many device drawing this much power. Anyone know if I should be okay as long as OS X doesn't give me a message or should I really consider getting a USB hub with its own power adaptor?
What is this? I was comparing the Macbook pros and came across that option. What is it? what does it do?
View 6 Replies View RelatedIs there a port to connect to a TV screen?
View 12 Replies View RelatedCan a MacBook Pro be changed by plugging in a power supply via the USB port?
Info:
MacBook Pro (13-inch Mid 2010)
I want to connect a video camera to stream video live through mivesta.com for cooking events. I understand USB streaming will not work on a Mac.
View 3 Replies View RelatedJust bought a Mac Air 13 inch and I was downloading photos, when it stopped and say the USD port needed to be enable, how is this done?
View 1 Replies View RelatedMy macbook does not have a firewire port. Is there any kind of adapter that will allow me to use my advc 300 (which need to plug in to the FireWire port)?
Info:
MacBook
