I've turned DVD/CD sharing on and checked that the firewall is off on the host computer, but I still see nothing in Remote Disc on my MB Air.
Info:
MacBook Air, Mac OS X (10.7.4)
I have a Mac Mini (2011) and a MacBook (2006) I want to use my Microsoft Office for Mac 2004 CD on to my Mini using the Remote Disc option. I put the CD into my MacBook and click all the options and follow the instructions from the Apple Support 'MacBook Air, Mac Mini: How to use Remote Disc to share DVDs or CDs from a Mac or Windows-based computer' When I click Remote Disc on my Mini the MacBook shows up and when I click on that, the CD shows up but I can't open or copy the CD onto my Mini. I keep getting an error message which makes no sense.
Incase it was my MacBook (2006) running Leopard was the problem and it being to far behind my Mac Mini running Lion I used my mums Windows Dell Laptop which runs Windows 7 and again, followed the instructions. Same thing, same error message, which I was expecting because I know how Mac hates to open .exe files.
I don't know what to do to solve the problem, can it be solved? Is my MacBook and CDs just to old to copy and install on my Mac Mini, would a MacBook Pro 2010 and Microsoft Office for Mac 2011 solve the problem? I'd like to know before I save up and splash out any money. The error message says something like it's not supported even though we downloaded the updates the support thing suggested doing if we needed too and something about it can't read it because it's not there or you need to have it installed previously, well how could I have installed the on the Mini if CD it never had a CD drive, where else would I have got the programme from, I haven't found a downloadable version of Office Word or I'd have done that already, by the way, if you know where a full programme download is available?
Info:
Mac mini, Windows 7, MacBook 2006
I have installed Disc 1 onto my Toshiba Laptop to enable Remote Disc sharing and I have followed the exact instructions as per Apple Support website and I am connected on the same network on both machines. When I open Finder on my Macbook Air it does show my Toshiba drive and when I click to try open the disc, it thinks for a while then comes up with error "The operation cannot be completed because the original item for "[disc name]" cannot be found."
View 12 Replies View RelatedAfter I upgraded to 10.7.4 I receive popup windows informing that: This computer's local hostname "ComputerName" is already in use on this network. The name has been changed to "ComputerName-1.local" every time my Mac wakes up. The number at the end of computer name increases every time I wake my Mac Pro up.
- Disk permissions repair brings no errors.
- After Mac restart - the same result
- As before I use both LAN and WiFi connections with LAN in higher priority.
Info:
Mac Pro, Mac OS X (10.7.4), 6Core 3.33GHz 24GB 4x3TB HDD+SSD
I tried to install the remote disc provided with the Air into 2 windows computers. Both computers say they cannot read the disc. Do I have a bad disc?
View 1 Replies View RelatedI'm not seeing a disc show up in the sidebar of my mac mini running Lion 7.3 after enabling CD and DVD sharing on my Macbook Pro (running snow leopard 6.8)
Info:
MacBook Pro (15-inch Early 2008), Mac OS X (10.6.8)
Well, my question is very simple: I have a MBA and this other laptop from work, a crappy HP which is old as hell. I'm planning to use Remote Disc to reinstall my Leopard, since the upgrade to 10.5.3 really screwed things here, and I can't figure out why. Point is: instead of running all Leopard installation thru Remote Disc, I would prefer to share Leopard disc 1 over Remote Disc and restore it to a partition on my external HD, making a clone of it, which would install *much* faster. Has anyone tried anything like this? There's any Windows program which allows me to rip a Mac DVD to a Mac partition?
View 2 Replies View RelatedIs there anyway to ensure that when two Macs are File Sharing with Firewire that they use that connection rather than the network connection? Anytime I connect I can't tell how I'm connected until I try to transfer a file and it says it'll take fifteen minutes. If I turn off my airport it'll then use the firewire and transfer in seconds. Is there anyway around having to disable wifi to get it to use the wire?
Also, how do I turn on file sharing for just one other Mac? I just want to be able to share the files on the Mini with the MBP, not any other computer on the network.
I have the same question about printing error - remote host did not accept file data (32), is the answer the same as I saw among answers about the notification regarding printers? I have Copy Machine: Kyosera KM-2560. I print, let's say about 120 sheets on Friday. After about 50% into the spooling I get this message of the error. Would it be the printer using IP?
View 1 Replies View RelatedI just got my MBA, it is my first Mac. I left my disc at my house and need to download the remote disc onto a vista based pc. Is there any where i can go and download the software i need?
View 3 Replies View RelatedWhenever I try and SSH into my MacBook Pro (10.6.8 Snow Leopard) from an external machine, I get the error message: ssh_exchange_identification: Connection closed by remote host Below is the message when I try and SSH with -vvv :
OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 22.
[code]....
Info:
MacBook Pro, Mac OS X (10.6.8)
In having a problem with my MacBook pro with OS X 10.10 installed and the network hostname just changes automatically from "my MacBook Pro" to "my MacBook pro (2)" And later on it changes to "my MacBook pro (4)" . How this happens and how to resolve this I tryed to change the host name but it automatically changes back agaiN even when I disconnect the wifi then change the name back into "my MacBook Pro" it takes abou a minute to automatically change back into my "MacBook pro (2)" or even "my MacBook pro (4)"....
Info:
MacBook Pro (15-inch Early 2011), OS X Yosemite (10.10.1)
i just purchased a new MacBook Air and need to install my, also newly purchased, MS Office 2012 software. I have an iMac with the CD inserted and see the MacBook Air has a "Remote Disc" mount point in Finder. What I do not know is how to get the MacBook Air to see the CD in the iMac.
If I am interpreting "remote disc" wrong and would be better off mounting a USB DVD drive
Info:
iMac, Mac OS X (10.6.7)
I am curious if I can burn a DVD using remote disc or if I need to buy the external drive.
Info:
MacBook Air, Mac OS X (10.7.3)
I have the following:
Mac Book Air with 10.5.8
iMac with 10.6.4
Purchased 10.6 Mac Box Set
When I try to access and install 10.6 on my MacBook Air, I get the following error:
"The operation cannot be completed because the original item for "Mac OS X Install DVD" cannot be found"
I am trying to use remote disc on my iMac to access the 10.6 install disc. I used the the "Ask to use" option on my MacBook Air, and then selected "Ok" on my iMac to give permission. Despite this I get the above error.
so when I try to use remote disc, on top of taking like 5 minutes to connect, when I try to open the audio CD in my PC laptop's disc drive, it doesn't work. It will just sit there for like 3-4 minutes and then tell me something about it not being found. I attached a picture of the message I get. What should I do?
View 7 Replies View RelatedI just got the ultimate macbook air and can't seem to get this done. I was able to install iWork using the remote disc drive of my dell.
View 6 Replies View RelatedI got remote disc up and running on a windows pc. Can I use it to install windows XP on to my MB Air?
I dont care if I use parallels, fusion or bootcamp, i dont care if it is windows xp or windows 98.
I just need windows running on my system as I need to run just one windows based application.
remote disc has worked previously between my daughters MacBook and my MacBook air, so I was not expecting any problem with my Company supplied Dell 420.
The Dell has a remote disc drive, and I suspect this could have something to do with the situation, but would like to know if I am right.
Basically my Air has no problem detecting the Dell and as soon as I "ask to use", the dell will show the pop-up, and I can confirm or accept that my air is allowed to use the disc drive of the Dell.
Screen sharing cannot be turned off or blocked because it says that the "Remote Management service" is using it. I have no other computers in my home. how can i block it?
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.5)
I am using my MBA with an old Dell Inspiron laptop (running Vista) for the optical drive when necessary. I've installed software using remote disc with no problems (reinstall of OS, then Sibelius music notation software). I assumed I would also be able to read audio CDs or DVDs using remote disc, but every time I have tried this it doesn't work. The connection is fine, but the MBA is unable to find the data - one message I've had says it cannot find the original source (or something like that!). Does remote disc only work for software? Or might there be a way around this? I don't particularly want to use iTunes on the Dell as it's set up with my wife's account and even plugging my iPhone into it got it all confused.
View 1 Replies View RelatedIs it true that you can't import music with remote disc on the MacBook Air?
View 24 Replies View RelatedI have followed the instructions, on the boot screen I selected the appropriate option to remote disc boot via wireless connection to my iMac to OSX. Well its been 15 minutes now and still it has not booted into the OSX setup screen. It just shows a "no smoking" type symbol, and a little circle like its doing something and the iMac Remote Install Mac OSX app just says "Waiting for MBA to startup"... but its taking so goddamn long! How long is it supposed to take to reach the OSX setup screen over wireless?
View 1 Replies View RelatedYo fellow dudes and dudettes of the Fellowship of the MBAs!
I gotta sticky situation down here. Hmm, can I use remote disc to install windows based apps while running the windows operating system on my Mac?
I wanna install this software called Ulead Video Studio. Can I use remote disc then?
Is it possible to put the remote disc install file on a flash drive so that I could install the remote disc program onto a computer from the that instead of a cd?
View 2 Replies View RelatedI've read many reviews saying that the remote disc installation takes 5-6 hours, so after loading the installation, I thought that I would leave it working through the night...
However the "time left" only showed 1,2 hours
In total it took me no more than 1 hour to get a fresh Mac OSX using Wlan...it's simply amazing in my opinion, I even don't know whether the external drive would have done it better.
So don't be scarde to reinstall it with remote disc guys, or waste money on the drive unless you really need it.
Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?
View 1 Replies View RelatedMy dvd drive is busted, so I'm attempting to use remote disc to install snow leopard on my macbook pro (running 10.5.5). There doesn't seem to be a clean install option without running the snow leopard disc from boot. Is there any way that I can run the install disc from boot via remote disc so I can run a clean install? I tried restarting my computer and holding down the alt/option key, which showed the only available boot drive as my macbook pro's internal hard drive.
View 1 Replies View RelatedI have both Remote Login and Web Sharing enabled on my Leopard Macbook. When I try to SSH to it (from the same network) it just hangs, without ever asking for a password. Web Sharing says it can't find the host, even from on the Macbook itself.
For the record, Screen Sharing and File Sharing are working fine.
Anyone have any ideas what might be wrong?
I am trying to figure out what the best option is for remote controlling my computer. I've used LogMeIn Free, which is a great option, and I really like that I can use any web browser from any computer, and even my iPhone to remotely control my primary desktop computer.
I've also used Mac's built in ScreenSharing.app to access my various computers using the Back To My Mac, which is also a great option.
I guess I would just like to find out if any better options exist. I do not like that the Mac's built in ScreenSharing.app doesn't permit me to view my remote desktop "Full Screen".
I do not like that LogMeIn seems like little more than a PC ported application made to work with a Mac as an after thought.
