I have a Mac, which I love deal, but the evil people at the MBA program I will be attending next year are dead set on me having a PC (They have a "special deal with Dell" that isn't a deal). The compromise is that I can just add Windows to my Mac. I know that this is possible through Parallel, but am really concerned about performance issues and viruses. I have the entry level computer, not the Pro, so I'm very concerned about this proposition. I'm hoping to fight them on this issue, so I'm really looking for your adding Windows to an entry level Mac horror stories.
I have Parallels 3 installed, mostly to run MS Money. Last night I installed Snow Leopard, unaware that Parallels 3 is not compatible. It appears that I need to go out and buy Parallels 4 as that will work with Snow Leopard.
My question is will all my data within Windows remain if I install 4 or will it be a completely new Windows? And if so, how do I go in and retrieve my MS Money data as I can no longer access it with Parallels 3.
I'm really confused about the best way for running W7 through Paralles 5. All I need to run on windows is a forex trading platform. I've read that you get better performance if you install the virtual machine onto a separate disk. So I'm wondering is it even possible to install windows through bootcamp + parallels onto an Express Card SSD and run it off of that?
Or would I be best just installing it all onto the local disk drive using a separate partition for bootcamp? I'm new to running virtual machines so don't really know how it all works or the best route to go. I'm trying to decide between 13" macbook pro using separate partition on disk or a MBP with express card slot. Also, I'm assuming the SD Card is too slow for this?
Rather than having 2 laptops, I would like to use parallels to bring xp onto my macbook pro, the only reason I will be using XP, is that alot of the video control digitzers I have to operate are pc orientated. This will be the only reason I will be using windows, my concern is that I hear so much about windows and viruses.
I am having a very hard time installing doss 6.22 on my Mac. Why would I want too? Well cause of work, we have some a lot of old data at work that was collected over the years using dos programs and I need to go threw it and pull out what I need, when I need it. So having it on my laptop would be great. I have tried both Parallels & VMware with no luck. I can't get them to realize that I have a floppy drive, it's a usb floppy drive. I have 6gig of memory running snow lepoard. I have been thinking of trying the Sun Microsystem software but thought I would ask here first.
I am planning on installing Windows 7 on my new macbook pro. have a windows vista install cd and then a windows 7 pro upgrade dvd. If i install it on my new mac will it automatically block my laptop??? i have searched online and there are conflicting responses to this? Do i need to uninstall it? is it automatic?
I had installed Parallels and Windows 7 to my Macbook when I first purchased it.Had some issues and uninstalled both. Now I'm trying to reinstall and I can seem to get Windows installed.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
I have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I have spent many hours now trying to get on the internet from Parallels. I read several threads on this forum, searched Google, and poked around my computer as described below, but to no avail.I am using a MacBook with an Intel processor and OS 10.5.8. I am running Windows XP version 2002 via Parallels 5.A list of things I have tried:1. Open Internet Explorer, receive message saying "web page is not available offline; to view click Connect," click Connect, see popup labeled "Dial-up Connection" which is of no use whatever.
I got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point??
I bought my first Macbook Pro 15? and I installed Windows 7 64-bit using bootcamp without any problem. Thereafter, I used Parallels 5 to create a virtual machine for Windows 7 and be able to run Windows 7 within the Snow Leopard OS and be able to move back and forth between the two operating systems. However, Parallels 5 created two virtual machines, one called Boot Camp and one called Windows 7. When I was installing Parallels I chose to create the Windows 7 virtual machine but never asked Parallels to create the Boot Camp virtual machine. Where this other virtual machine is coming from? Am I able to delete it without creating any problem or conflicts? Moreover, I have two shortcut icons on the Mac pointing to either of these two partitions. Similarly I have two windows folders on the right side of the Mac dock. What should I do to have only the Windows 7 virtual machine without creating any problems or conflicts?
Right now, I got Parallels with Windows 7 installed on my mac. But I also want to add bootcamp, so I can open Windows when booted. Is it possible to add the current Windows 7 system files and personal files to a bootcamp? If so, what should I do?
I have the latest build of Parallels 3.0 (build 5636). I use Windows Vista Basic through the Boot Camp partition. Parallels launches Windows with no problems. However, when I try to boot Windows Vista Basic through Boot Camp, the black screen with the green bar and the Microsoft Corporation copyright appears, and then before it switches to the next screen, I get a split second blue screen of death and then the computer reboots itself. I video taped the incident, but since the blue screen of death scrolls the message onto the screen, the computer rebooted before it could tell me what specific file may be corrupted.
I've already tried the following:
1. Booted the computer with the Windows installation DVD to do a "start up" repair attempt. 2. Created a new virtual machine. 3. Done a system restore to before the new version of Parallels was installed.
There was a time when Parallels froze and I had to "force quit" it. That could have corrupted something with the Boot Camp partition. Could that be the case?
I used Boot Camp to put XP on my iMac. If I get Parallels, will it be able to give me access to the files that are on the currently existing XP partition?
Or will I have to re-install XP onto the Mac partition and transfer all my files from the old Boot Camp XP to the new Parallels XP?
I'm having pretty bad difficulties with Windows 7 and Parallels Desktop. I know it's not supported yet, but some folk have it working. I can boot up, but I can't install Parallels Tools. I changed the Configuration to "Windows 2008 Server" like someone suggested in another forum, but fails to boot up.
Seems like VMWare are offering a better helping hand than Parallels Desktop - and while it is not supported yet by them, they say that if you use Windows 2008 Server Config everything works apart from sound.
So am I best giving it a bash with VMWare's Fusion? 30-day trial for free. But I'd rather try get Parallels working since I paid for it.
I have a USB device with a windows driver and application that works fine under bootcamp. No native OSX drivers available for this device. Will I be able to install the drivers and run using Parallels?
Just recently started with a company that uses a SonicWall SOHO3 VPN - the client is Windows based only. I am trying run this on my Windows XP Pro VM in Parallels 5.0 for Mac (I use a MBP with Snow Leopard 10.6.2) and get hung up on the "Acquiring IP" step. Same result in shared or bridged setting on Parallels.
I got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point?
I installed Windows via boot camp and activated smoothly. I then installed Parallels and had it boot off my boot camp partition. It had me activate again, which I did. All was running smooth until a few days ago. When I boot Parallels it says Windows is activated, but when I'm in boot camp it says it isn't. No matter how many times I try to reactivate the boot camp installation it says I need to "type a different product key for registration"
I need install windows 7 on my mac (for some windows only programs). I would like to create a partition via bootcamp to run Windows 7 on my mac. I would also like to use that same partition on Parallels 5.
I am looking for a way to LINK the bootcamp partition to Parallels 5 so I can use Windows 7 on parallels when I am need of "light" programs and just boot to Windows 7 when I need more intensive programs. I have NOT installed windows 7 via Bootcamp or Parallels yet.
I currently have 2 Partitions. One of them is of the Mac OSX And one of the Windows 7 through Boot Camp. Now i've been wondering if it's possible and how, To add more space to my Windows 7 Boot camp partition.
