Mac Pro :: Can't Get Native Resolution On Second Monitor In OS X
Oct 13, 2010
Here are my hardware specs:
Mac Pro 1,1
NVidia 7300GT (I need a new video card, anyone want to sell me one? [=)
2 x Samsung Synmaster 2494SW (native resolution 1920x1080)
Update:
I booted into windows 7 and I am now able to get both native resolutions.
Though, I am still unable to get both native resolutions (using DVI to DVIs) inside OS X for some reason. In OS X my second monitor is displayed as "VGA Display" and it completely black.
I am not sure why it works in bootcamp using Windows 7, but not in Snow Leopard. I am guessing this is a problem with the OS X configuration.
I have a Hyundai W240D 24" LCD monitor and it works perfectly in Windows Vista SP2 64 bit running under Boot Camp but when I restart the computer to use Mac OS X it only shows 1920 x 1080 as the maximum resolution rather than 1920 x 1200. I have zapped the PRAM, repaired disk permissions and run fsck -f in single user mode and still the problem persists. Does anyone have any suggestions for how to fix this?
I have a Samsung SB970 S27B970D 27-Inch Screen LED-Lit Monitor with native resolution of 2560x1440. When I connect it to my 2012 13" MacBook Pro via mini display port to DVI, I am unable to get anything better than 1080p.
Here's what System Information shows for my displays. Intel HD Graphics 4000: Chipset Model: Intel HD Graphics 4000 Type: GPU Bus: Built-In VRAM (Total): 768 MB Vendor: Intel (0x8086) Device ID: 0x0166 Revision ID: 0x0009 Displays:Color LCD: Display Type: LCD Resolution: 2560 X 1600 Retina: Yes Pixel Depth: 32-Bit Color (ARGB8888) Mirror: On Mirror Status: Hardware Mirror Online: Yes Built-In: Yes Connection Type: DisplayPortS27B970: Resolution: 1920 x 1080 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Display Serial Number: H3HCA00500 Main Display: Yes Mirror: On Mirror Status: Master Mirror Online: Yes Rotation: Supported Television: Yes
As you can see, 2560 should be supported.
Also note that we have two different MBPs and two different Samsung monitors (same model, ordered at different times) that do the same thing.
I am connecting my Macbook on my HD TV but the osx does not detect the appropriate native resolution. MY Samsung TV has a native resolution of 1365x768 but the osx only detects and offers 1280 or 1920 (they both look really bad on my TV). I used a mini-DVI to DVI adapter and a DVI to HDMI cable. I also tried, without success, to create specific display settings using SwitchResX and DisplayConfigX. (10.5.2) I know that there is not a big difference between 1280 and 1365 but still, it's very annoying espacially that I my old PC with XP detected the right resolution as soon as connected it...
I read this in a post elsewhere and am looking for a new 24 inch + monitor on a budget. I could ideally use the monitor for music work on my mac, my xbox and snes and for watching tv. "If I may offer one bit of advice about LCD monitors is that they only run optimally in their native resolution. You will need to get a large enough monitor to support this resolution for comfortable viewing or you can end up with tiny desktop icons. Reducing the resolution will likely degrade image quality." What does this mean given I have the unibody macbook pro 2.8 released around christmas 2008 with the best the better graphics card (whichever one that was).
Here is what I am working with. White MacBook (Late 2007) Sylvania 22" LCD TV (1366X768 resolution) Mini-DVI to HDMI SwitchResX
So the problem is that the native resolution of the TV isn't a normal one. Called Apple. No help. Called Sylvania. Told me to call Apple. I've tried using SwitchResX to set the resolution to 1366X768 and have tried variations found on other websites (1368, 1360) but every time I restart it reverts back to 1080i. While 1080i works, the problem is that it is very hard on my eyes, and the text is hard to read, something I am assuming will hopefully be fixed when I get it to work at the native resolution.
I was waiting to buy a new Macbook Pro but as soon as they were released today I said "meh" and decided maybe I should buy a brand new iMac and keep my Early 08 MBP. I want to get a new Mac in preparation for the upcoming launch of Steam on OS X and just because mine is long in the tooth for Windows gaming.
Anyways... I just had a thought and was wondering if any owners could clear it up. The resolution on the 27 i7 Quad Core seems ENORMOUS for a middle-grade ATI GPU. Are you able to game on high settings for semi-modern games like L4D2, TF2, etc. at the 27"'s native resolution? What are your thoughts on it as a gaming machine. It seems like the 27" will obsolete itself quicker than a i5/i7 21 inch (if one ever comes out) due to the screen resolution size.
I'm a hardcore gamer that is a stickler for quality, and CRT is still the gold standard when it comes to a perfect image (not to mention the ability to run many resolutions without any quality degradation), but LCDs have come a long way. I'm likely making the switch to Mac (using Boot Camp for the few PC games I play, I mostly play consoles).
The iMac is the best fit for me but I'm concerned, when new games come out that exceed your system's specs you generally turn down the resolution to procure a quality image with a decent frame rate. 1920x1200 is a very high resolution with a lot of pixels, how much worse does the image get when turning the resolution down? Since it won't be at its native resolution I've heard that lowers image quality, but I have no personal experience since I've never used an LCD.
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
I just purchased a Samsung Series 4 Model 530 monitor, 32 inch, with a resolution of 1920 x 1080p. Can this effectively be used as the main monitor for my new Mac Pro laptop? I can NOT find this resolution in the prefs anywhere, and do not know if I can really use this monitor. I work in print design, and as a result, I am always viewing typography in great detail.
I'm looking for an external monitor to plug my macbook into. Mainly working on Aperture, Microsoft office, and web surfing. Not watching movies or gaming on it. With my budget, the only IPS monitor I can afford is the 22" Dell ultrasharp. It comes with 1680x1050 resolution (or close to that). Also, its non-glossy, and I prefer glossy. Alternatively I can get a plain vanilla 24" TN monitor with 1920x1200.
I do need the extra screen estate, which is why I decided to buy a monitor in the first place. I frequently have to refer to multiple documents at the same time while working on Microsoft office, and Aperture would certainly benefit from more space. All these resolutions are new to me, my current desktop PC is still running on 1200x1024. Is there a significant difference moving from 1680 to 1920? Is it justified to lose the IPS feature (which gives better color and viewing angles, I've been told).
From reviews seen so far the 4K monitors available do not achieve the 60Hz refresh rate...
The other issue is that the price of these displays is somewhat extravagant at the moment and since I intend to use my Mac pro for other applications and not Video and Photo editing I would like to ask whether a display of resolution (say 1920X1080) would work with my new Mac Pro.
I bought one LG flatron e2350V, and i'm trying to connect it to my macbook pro, it's connect through minidisplay port - dvi. When in system preferences if i choose use monitor it appears with great resolution, beautiful image. But if i choose "use identical image for both monitors" the resolution on the LG turns crap. What should i do to have identical image (so i can have my macbookpro with lid closed) but have at the same time an awesome resolution?
Just bought a new 22' LG monitor and I have the Mini DisplayPort to VGA. When I connect my monitor to my MacBook all is OK until I try to chose the 1680x1050 which is the LG's prefered resolution. When I chose it, my monitor turns to black, then after a while it shows the picture for a second, then black again.. Is this a 9400m fault, or the VGA adapter fault?If I try a MiniDisplay port to DVI, will it work in 1680 x 1050? All the other resolutions are shown ok..
I read a few posts that seem to indicate that non-mac monitor cannot display higher them 1680x1200 when connected to a Mac computer. A friend of mine is planing on getting a new Mac pro with a 30" Samsung monitor (2560 x 1600). Will he be able to run the monitor a max resolution?
Recently I plugged my HD Monitor to my MacBook and the resolution changed (on the external monitor). I went to Display Preferences but I do not get any resolutions above 1600x1200. When I first used this monitor, I could use it at 1920x1080 and now I simply can't. I don't know if it's a PRAM issue. I reset it but nothing changed.
I'm using a HP 2309m monitor in VGA mode using the VGA-Mini display port adapter. I use the monitor with a PC in DVI mode, but I never use these connection at the same time. I noticed something. When I first used this monitor, Mac identified it as HP 2309 when I opened the display preferences. Now, it only recognizes it as Display.
This happened before and a restart fixed the problem, but not anymore. Out of nowhere, I startup and I'm getting a message on the screen of my Samsung 2033SW that the resolution should be 1600 x 900 60mhz. This is a message from the monitor, not a Mac system message. But there is no setting for 1600x900 on the system prefs. I tried restarting, and so on, but nothing... In previous occurrences, somehow some way, I started to see the proper settings and then I just selected them in system prefs. But no longer. I'm stuck on 1024 x 768, the closest to the proportional resolution I'm after. I don't know of any way to force the proper resolution. Are there some .plist files I can delete? There are other issues with this machine which is old and I'm working around for now.
I just found out that if I use the "mirroring" mode, and I set the resolution to 1680x1050 and 60hz(my monitor max resolution/hz), it's all kinda blurry... But if I put in sleep mode ma MPB and wake it up "switching on" my bluetooth keyboard, the monitor in my MBP doesn't even start and it just use the external monitor. In this case, there's no more blurriness but the settings are the same! Then, I can even turn on my MBP monitor (pressing some random key on its keyboard) and nothing change, still no blurriness...
How can this happen? By the way, there is another funny issue: if I use this "trick", the applications that should run in "fullscreen" (not really fullscreen, just the window that use all the screen size), like iTunes, don't do it anymore....
I have a Macbook Pro 13 inch 2010 model hooked up to a NEC Multisync EA231 WMI external monitor. The monitor is supposed to have a resolution of 1920 X 1080, but my computer only recognizes 1600 x 900 as the highest resolution. I've tried both mirrored and extended desktop, and I've also hooked up the monitor through a DVI adaptor and through a displayport cable. An Apple support person suggested using a dual-link DVI adaptor, but according to the Apple site this shouldn't be necessary for 1920 x 1080 resolution (I've also heard that it's a buggy piece of hardware). Any suggestions for getting optimal resolution?
I'm using a MacBook Pro OSX 10.6.4, have a simple dongle I purchased at the Mac Store which takes only DVI. The HP 2304 widescreen monitor only works with windows mirrored and has poor resolution - nothing like the 1440 Mac tells me I'm getting. I've used the build HP display adjustments with no joy. HP does not have Mac drivers for this display.
I have dual monitors connected to my 2010 Mac mini (the first model of Mac mini to support two separate monitor outputs) and I have it in extended desktop mode. (Different content on both monitors)
When I first attached my secondary monitor, the resolution was correct. However, ever since a power outage several years ago the monitor's resolution ratio is different. The monitor's resolution is now 1280 x 1024, but the ratio is off for my Widescreen monitor. It isn't the default "widescreen", but it isn't a square either. Because of this ratio mismatch, all the content on that monitor is stretched out horizontally. (From side to side)
Info:Mac mini, Mac OS X (10.7.3), Mac mini 2010 with OS X Lion
I have just connected an external 19" monitor to my 15" macbook pro. I am using both displays and that is fine, however I would like to be able to change the font sizes in my 19" monitor, because the default one is too small. I have to get awfully close to the monitor. I am not sure how i can display it better. When I tried changing resolution from 1440x900 to others, I didn't make it right, is that the only way? All I want is for screens in this monitor to have larger fonts (all programs, whether its safari, chrome, mail, etc). I should mention I am a brand new mac user.
I am running Lion OS on a 17 inch unibody Macbook Pro. I have been watching television on my Sony XBR television through my computer using a mini-hdmi to hdmi converter - essentially using my television as a second monitor by using mirror mode. It has been working perfectly until just recently. Now everytime I hook up the mini-hdmi connection, it is changing the resolution of my Macbook Pro screen. It is crushing the picture of the Macbook down and making Safari - the controls as well as the screen image contained therein - really dark. I have tried playing with the display controls-including trying to get my computer to re-detect my television. I am stumped as to WHY this started happening all the sudden.
The maximum resolution on my brand new 13" Macbook air is 1440 x 900. The monitor I want to buy has a resolution of 1920 x 1080. Can I use this monitor with my Macbook air, and will it look OK?
I have an iMac 5K connected to a second monitor (HP ZR2740W) via mini DisplayPort to DVI adapter. In Displays prefs, I can only select resolutions of Best for Display or Scaled-1280x720 (which doesn't change anything.) I'd like to be able to change to a higher resolution.
Info: iMac with Retina 5K display, OS X Yosemite (10.10.1)
I'm using a Mac Mini (running 10.3.8) connected to an old View Sonic E95 monitor. No problems except that every time I leave the computer for a while it goes to sleep and "forgets" what display it is connected to. When I hit a key or whatever to reawaken it, the display resolution has been re-set to "VGA 800x600" and I have to tell it to "Detect Display" again..
Any clues? I have looked on the forums and Google with no success .
