Intel Mac :: Can Use It As An External Display
Feb 10, 2012I have a 21.5" Mid 2011 iMac and a 24" Mid 2007 iMac. Is there any way to use one of them as an external monitor for the other?
Info:
Intel iMac, Mac OS X (10.6.6)
ADVERTISEMENT
Intel Mac :: External Display Impact On GPU?
Jun 25, 2012I have an early 2006 Intel iMac 17" with a Core Duo 1.83 GHz processor and the 128MB ATI Radeon X1600 GPU. I am planning on adding an external display to my iMac, probably a Dell Ultrasharp 23" with a resolution of 1920 x 1080. What I want to know is, what impact will running an 2nd display have on my iMac's frail and poorly cooled GPU?
At present, my GPU runs at around 45-50 C idle, and 60-65 C under gaming use. I have been considering opening my iMac again to clean all the dust out and renew the thermal paste on the GPU but simply haven't gotten around to this just yet. If the GPU is likely to run much hotter if a display is connected?
Info:
Mac OS X (10.6)
Intel Mac :: External Drive Won't Display In Finder
Feb 1, 2012I have a 500gb Verbatim external drive that I can't see in Finder. I've tried to restart, but with no luck.
Info:
iMac, Mac OS X (10.7.2)
Intel Mac :: Unable To Detect An External Display?
Feb 4, 2012I'm using a mini display-port to hdmi lead and it worked once. I unplugged the hdmi cable when it was still connected to the mac and now it wont find it.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
Intel Mac :: Error With Dashboard On External Display Only
Apr 18, 2012I recently plugged my MacBook Pro back into my external monitor and half the dashboard display was blurry and seemed to use a lower colour resolution (they colours appears bold and limited). Only a portion of the widgets appeared liked this. After restarting the Dock, all of the widgets have this appearance. Short of rebooting my computer (which takes time out of my work)
Info:MacBookPro, Mac OS X (10.7.3)
Intel Mac :: Use 21.5 (mid 2011) As A External Display For Laptop (windows)
Jun 16, 2012Can i use my iMac 21.5 as an external display for my Windows based pc?
Im look for a wired solution, not a airport or even using internet programs like VLC
Info:
iMac, Mac OS X (10.7.4)
Intel Mac :: External Monitor In Target Display Mode Won't Wake Up
Mar 26, 2012I'm using 2 IMac 27' and one is simply used as an external display. When I wake up the computer from sleep, it works on the main monitor, however the external display still has a black screen. I have to unplug the external monitor to get it to wake up. I tried unplugging thunderbolt and replugging it in which worked the first time, but same issue again not waking up.
Info:
iMac
Intel Mac :: Using A 27-inch (Late 2009 Or Mid 2010) As An External Display
Apr 7, 2012why can't i turn down the monitor brightness in target display mode? volume keys and cmd-f2 works as described, but brightness keys do nothing?
Info:
iMac, Mac OS X (10.7.3)
Intel Mac :: Using A 27-inch (Late 2009 Or Mid 2010) As An External Display?
May 10, 2012I would like sometimes use my PC and I would like to use 2010 iMacs display as my PC's display.
Info:
iMac (27-inch Mid 2010)
Intel Mac :: Screen Resolution Reduced When Mirroring External Display
May 14, 2012I have a 2.93 GHz Intel Core 2 Duo (24" early 2009) iMac running OS 10.7.3 (Lion) to which I have connected an Apple Cinema Display as an external monitor using a Mini Display-to-DVI adapter. The iMac is set to 1920 x 1200 resolution and the Cinema Display is at 1680 x 1050, and everything looks great until I turn on mirroring. When I do this, the iMac screen loses its nice crisp screen resolution, but the Cinema Display still looks fine. Strangely, the pull down menu for displays in the menu bar still claims that the iMac is at 1920 x 1200 and the Cinema Display is at 1680 x 1050, but I don't think this is the case. Is there any way to keep the iMac at the higher resolution while mirroring?
View 1 Replies View RelatedIMac (Intel) :: Can External Display Be Rotated Into Portrait Mode
Nov 30, 2014I was told that the new 5k imac can support one external 4k display via thunderbolt, but the 5k imac cannot itself be rotated into portrait mode (on a vesa mount for example). If I connect an external 4k display via thunderbolt to the new 5k imac, can the external display be rotated into portrait mode so I can have 3840 pixels vertically on the 4k display?
Info:
iMac with Retina 5K display, OS X Yosemite (10.10)
IMac (Intel) :: External Display Is Black But Cursor Still Shows Up
Jun 17, 2014I have a samsung display and I can see the cursor, but nothing i drag and drop over there is showing up. if I drag a tab over, I can see the cursor but not the page, just blackness
Info:
iMac, OS X Mountain Lion (10.8)
MacBook Pro :: External Display Is Not Waking / Retina Display Flashes Through Different Screen Views
Sep 4, 2014My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.Â
Info:
OS X Mavericks (10.9.4)
OS X Yosemite :: Use IMac As External Display (since It Does Not Support Target Display Mode)?
Dec 1, 2014I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
PowerPC :: Powerbook Internal Display Won't Turn On With External Display
May 22, 2007For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies View RelatedIMac :: How To Keep Display Sleeping While Keeping External Display Active?
Jan 23, 2008Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
Hardware :: Use The External Display As The Primary Display With My Laptop Closed
Dec 12, 2008I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedMac Mini :: External Display - Finding Display Port To DVI Adapter
Apr 25, 2009I am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
OS X :: Dual Display - Power Down And Disconnect The External Display
Oct 26, 2008I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
Hardware :: Disable IMac Display/use External Display Only?
Jan 13, 2010I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
IMac :: Turn Off The Display When Using An External Display?
Nov 10, 2009I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
MacBook Air :: Turn Off Display When Using External Display?
Jun 19, 2012While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
Info:
MacBook Air, Mac OS X (10.7.4)
OS X :: Unable To Show 10.6 Install On External Monitor / Grey Box On External Display With Black Bar
Feb 27, 2009I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
MacBook :: External Speakers Line Out When Using External Display?
Apr 5, 2010i'm hoping someone can help me out on this little problemmy usual set up is a pair of speakers connected with jacks via an m-audio usb audio interface, with an external monitor connected via mini-dvi to dvi.now for some reason my audio interface has randomly broken (on a side note, could a power cut have somehow broken a usb peripheral connected to my macbook whilst it was asleep?) so i've hooked up my speakers to the line out to rca. Now for some reason, when i plug the mini dvi connector into my macbook i get an incredible amount of hum. not just a little, alot!
View 1 Replies View RelatedIntel Mac :: Target Display Mode Does Not Work With Mini Display-Port Cable
Mar 5, 2012I want to buy the 27" iMac - but only if I can use it as external monitor for my Lenovo laptop when working from home. A the Apple store in London they said that this is possible with a Belkin converter from hdmi to mini display port (with a USB power caple to turn it into an active signal). The laptop also has a displayport.
Info:
iMac
MacBook Pro :: Use Computer In Closed Clam-shell (display Closed) Mode With An External Display?
Jun 4, 2012I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).Â
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).Â
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
MacBook Pro :: Use Computer In Closed Clamshell (display Closed) Mode With An External Display?
Jun 24, 2012I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
MacBook :: Finding An External Display That Matches My Black MacBook Display
Mar 2, 2009As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
Intel Mac :: 2008 Display Failure, Dvi Out To Another Display?
Feb 29, 2012Computer seems to be running fine, but display was intermittent and now blank. Can I bypass Imac screen by using dvi out to another display device?Â
Info:
iMac (24-inch Early 2008), iOS 5.0.1
OS X :: Using An IMac As An External Display?
Jul 6, 2008In the near future I will be purchasing a 24" iMac and I wanted to now if I could display TV programs or video game consoles on it using S-video (or another type of cable)like a normal Television screen.
I want to know because I also plan on purchasing a PS3 and want to display it on the iMac's beautiful 1080p screen!
Please tell me if there is any way so I can purchase the needed accessories in advance.
