Hardware :: Mirror Display Not Using The Whole Screen?
Jul 27, 2009
I have an Early 2008 Macbook connected to a 22" 1680x1050 display. When I set it to mirror the display and set it to the full resolution of 1680x1050 it only uses about 16" of the external display, when i set the resolution to 1280x800 on the external display it then uses all of the display.
When I don't mirror the displays it uses all of the display in full resolution.
Is there anyway to solve this so that i can use it to mirror the display but use all of the screen!
View 6 Replies
ADVERTISEMENT
Nov 26, 2009
So I have a rather frustrating issue. After installing SwitchResX and now uninstalling it reseting to factory settings I have been left with a pain in the backside.
I have a 20" iMac (1680x1050) and a secondary monitor (1280x1024) and now I and firstly, stuck In some kind of mirror displays mode, even though it is not enabled in system preferences. The wallpapers, resolutions and general screen contents is different except it keep mirroring the mouse movement from my iMac screen.
Secondly, in system preferences, under the Arrange tab, there are now displays in the box, I have an empty box meaning I cannot arrange my displays.
View 2 Replies
View Related
Aug 8, 2006
My next computer purchase will probably be a MacBook (or MacBook Pro) but I obviously want to be able to plug it into a better screen when I'm at my desk. I was wondering if anyone knows if it would be possible to use my current eMac as this screen?
I have heard that in the early iMacs the monitor was connected internally with a normal monitor lead - so you could open it up and connect a longer one. Does anyone know if this would be the case with an eMac?
Or any other way I might be able to do this?
View 2 Replies
View Related
Jul 8, 2009
I've got a 17" MacBook Pro on OSX 10.5.7 and a 15" TiBook on OSX 10.4.11.
Can I connect the TiBook to the MacBook Pro in such a way that I can use it to extend the screen? IE: main window on MBP and menus etc on Ti? If so how? Is it easy to switch back and forth on the Ti so I can get back to it's own screen easily?
View 4 Replies
View Related
Feb 1, 2012
I cannot seem to be able to mirror my macbook screen via wifi to the Apple TV. It only works with my iPad 2. Is there a solution now or in the future?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.2)
View 1 Replies
View Related
Sep 4, 2014
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
Info:
OS X Mavericks (10.9.4)
View 2 Replies
View Related
Jun 16, 2008
I tried to use some software to test the display. I found when the screen goes to completely dark with the backlight on, the bottom side of my screen is brighter than other parts.... have u guys met any problem like that, or is this some problem with my MBA?
View 2 Replies
View Related
Mar 10, 2012
Whenever I try to use Screen Sharing to control this one particular Mac Mini, and someone else is using the mini, and I pick "Connect to Virtual Display", I get dropped to a grey linen screen. Like the login screen, but without a list of usernames or anything. There it sits. Here is what I see in the console of the mac mini when I try and use a virtual display from the other machine:
3/10/12 7:30:04.291 AM mds: (Error) Backup: Couldn't stat source path '/Users/glados/Library/Saved Application State/com.apple.finder.savedState/window_3.data' -- importing from backup path instead
3/10/12 7:34:01.706 AM [0x0-0x9009].com.apple.systempreferences: System Preferences(148,0x7fff76017960) malloc: reference count underflow for 0x400440ce0, break on auto_refcount_underflow_error to debug.
[code]....
Info:
Mac mini, Mac OS X (10.7.3)
View 2 Replies
View Related
Sep 18, 2009
Alright, so this is what I have and what I want to do... What is the best and easiest way to get this done...
I have two 1TB WD Blacks... One I want to use to store all my videos... The other I want to use to backup the first... What are my options? The stuff on this drive rarely changes, but there are times where I will burn several DVDs at a time to the drive... I do this in order to play them wirelessly through my AppleTV...
My main drive is backed up using the TimeCapsule.
View 4 Replies
View Related
Mar 4, 2007
I just purchased a Mac Mini and am using a DVI to HDMI cable to connect it to my 42" Sony KDF-E42A10. I am unable to achieve full-screen resolution and downloaded SwitchResX to manually adjust the display. Does anyone know the timing parameters for the Sony or how to achieve full-screen resoltuion?
View 1 Replies
View Related
Jul 13, 2009
Just got the MBP 15'. It reflects like a mirror ,
I mean to say i can see myself . I guess this is what glossy means.
View 4 Replies
View Related
Sep 29, 2010
I just did a zero delete on my computer and only have CS5 master suite and Lightroom on my computer now (MacBook Pro 2010). I have 2 external harddrives I'm using. Both are 1TB. I have the Master drive with everything on it, and I want to use the 2nd drive to keep an updated copy of everything. Then I have a 3rd Hard drive, that I want to backup the 2nd backup and keep that off site. What is the best way to go about this?
View 5 Replies
View Related
Nov 7, 2010
I have a mid-2010 Macbook Pro with the Nvidia 330m. Does using Mirror Displays require any less system resources (such as VRAM) than Dual Displays? I mean it shouldn't right (assuming that you use the same resolution for Mirror and Dual) because there is still content on both screens being written to the VRAM?
View 2 Replies
View Related
Nov 5, 2009
I don't want to open my remote Mac's desktop in a window. I want to use my client Mac like it was a workstation for the remote Mac with the remote Mac's desktop filling the screen, full resolution, etc.
Is there a "Remote Desktop" app that does this? I've only used Leopard's built in feature.
View 4 Replies
View Related
Apr 4, 2010
I recently acquired a new to me 2009 13" MBP. I want to mirror all the applications (essentially everything on the computer) from my 15" MBP to the 13". What would be the best way to do this, should I use carbon copy to mirror my computer onto the drive and pop it in the 13" or should I use a time machine backup of my 15" system on a new drive and put it in the 13"?
View 4 Replies
View Related
Apr 14, 2010
Why does iPhoto take a mirror image of you when it takes a picture instead of an actual photo? I took a picture of myself with iPhoto and one with my digital camera. The one taken with the digital camera is correct as seen from the camera. The one taken with iPhoto is a mirror image of what the lens is actually seeing. Why is this?
View 3 Replies
View Related
May 9, 2010
I have a 1TB disk. It is now almost full. I just got a new 1TB disk and I want to make a mirrored RAID set of the two. If I create a RAID set in Disk Utility, does that erase my first disk? Or does it just mirror everything to the second?
View 2 Replies
View Related
May 17, 2012
I know the new OS that is due this summer will allow iMac to be mirrored to HDTV but will it also enable iPad 3 to be mirrored to iMac?
Info:
iMac, Mac OS X (10.7.4)
View 5 Replies
View Related
Aug 30, 2014
How to mirror to tv monitor using macbook pro 2012. The airplay is not displayed anywhere except iTunes which only plays what is on iTunes.
View 1 Replies
View Related
Nov 5, 2007
I've have an extra internal 500GB in my G5 and I would like to mirror it to my external 500GB HD (FW400) and repeat this process once a week. Don't want backups just want to mirror. Is it possible? If so what software should I use?
Information:
Powermac 2xG5
MacBook 2.0
MacbookPro
Mac OS X (10.5)
Airport Extreme
View 1 Replies
View Related
Oct 2, 2008
I don't know where I read about this, but I am getting ready to redo one of my systems. Currently it has 2 identical 250GB Hitachies, which use Super Duper every Sunday to backup. I tried doing a RAID 0 back in like 2004 on a system that had 4x60GB. I found out through trial and error and then later reading that you can't boot from a RAID in a Power Mac G4. But like I said earlier I don't know where I read this, but someone stated I could boot from a RAID 1 (mirror) in my Power Mac G4. Is this true? or not? Is it possible to boot from a RAID 1 in a Mac G4 but not RAID 0?
Something tells me this isn't going to work. I have a 10% glimmer of hope that maybe it will just see the drive as a regular drive. This would really be great. If anyone knows the answer to this puzzle please feel free to let me know...
View 3 Replies
View Related
Sep 19, 2010
so im looking for a DVI splitter for my MBP (DVI out) so that i can display to my external monitor and my TV.... any one have any recommendations?
Im not trying to have different images on the 2 externals, i am fine with the same thing on both!
View 5 Replies
View Related
Aug 6, 2008
Upon booting the machine, the LCD display flashes a proper view of the login screen for about 1 second
but then goes dark. When an external monitor is attached the external monitor works perfectly fine -- the
only trouble being that the external monitor is not currently set to "mirror" so it is impossible to log in and access the machine. The IT dept at the institute has a monopoly on repair of computers and so the quick answer -- take it to Apple is not all that easy. Is there a way to:
1) set the iMac to mirror display upon booting up by some clever key combination?
2) set the machine to mirror by remote access and command line methods?
3) mirror by changing something using target mode?
4) or the obvious...somehow login using the real estate provided by the external monitor.
Also has anyone seen this problem with iMac displays? An Intel iMac I think 2.16 Intel Core 2 Duo processor running Tiger.
View 4 Replies
View Related
Sep 2, 2009
I just got a new MacBook Pro and would like to mirror my current G5 desktop hard drive, so that I can keep all my applications like Photoshop and whatnot. Or do I have to mirror it at all? I'd actually prefer to partition the hard drive on my new laptop, which would make mirroring impossible. (as far as I understand.)
Can I just transfer my programs. If so, how? I no longer have key codes.
View 2 Replies
View Related
Sep 28, 2009
Having never set up a RAID config I was hoping I could get a little confirmation on setting up. Firstly, all data will be backed up using a NAS (maybe a time capsule), so at the moment I am just looking to mirror the primary drive of a Power Mac G5 incase of hardware faults.
The G5 is acting as a server and I therefore want to arrive at a situation that if a drive fails, the machine will still boot perfectly from one of the redundant disks (and of course notify the user to the failure), i.e. a bootable RAID 1 configurationAs I understand it, I can only achieve this using a dedicated RAID controller (i.e. this can't be done via a software raid)? Is this the case?
View 3 Replies
View Related
Dec 14, 2006
How can I print a document in a mirror image from Word? I thought maybe just save as a PDF, open in Preview and go to tools; flip horizontal, but for some reason its greyed out.
View 12 Replies
View Related
Jan 1, 2007
A friend and I want to play cards with our iSights, which would mean that each of our screens would have to appear exactly the same. The problem is that the iSight, for convenience' sake, shows my camera image flopped as a mirror image as opposed to how it appears on my friend's screen. Eg.: If I hold up my left hand, my screen shows me appearing to hold up my right hand. This obviously aids me if I need to straighten my hair and such, but for the game we want to play, it mucks things up big time.
View 11 Replies
View Related
May 31, 2009
I'm currently setting up two 1TB hard drives as mirrored RAID drives.
Seems easy enough to do through Disk Utility, though zeroing out the data takes about 1.5 days for each drive, due to their size I assume.
Will it be easy to migrate these drives to Snow Leopard?
Will it just be a matter of adding them to the RAID list in SL's Disk Utility? Will it recognize them automatically?
View 8 Replies
View Related
Sep 5, 2009
I have an iMac and a mbp, both intels & running 10.5.8. I work on the road and wish to have both computers contain the same information with out over writing the new files. i.e. - I work on a word file at home, work on the same file at the office and then record my band before heading home. When I get home, I want my home computer to have the updated word file and back up the logic audio files. The other part of this is so that my iPhone will sync with both computers. MobileMe was kind of the right path but I didn't quite do the trick. How do I do that?
View 12 Replies
View Related
Nov 24, 2009
I have taking the plunge and bought a new i7 iMac. On my current machine I have 2 WD external USB drives (1TB) in RAID mirror, done through Disk Utilities. I am looking for advice on the correct way to move this to my new machine. Do I simply plug them in, and OSX does the rest? The data is very valuable, and I don't really have enough space to copy it all / back it up before i move it. Being a mirror, it is essentially is my backup.
View 3 Replies
View Related
